|
No, there could be no more references holding on to it.
The other thing, that i didn't see earlier, is possibly the columns being wiped out and rebuilt after the data bind.
And, of course, the possibility of having to Clean the project, then rebuild.
|
|
|
|
|
Clean the project and rebuild? I'm afraid I don't understand. There's still a lot of tools in Visual Studio that I'm learning... is "clean" one of them?
I do appreciate the assistance, believe me!
I ended up finding a workaround... I noticed that if I clicked OK on the messagebox that informed me of the error, the system went on ahead and built everything and all looked and acted okay. So what I did was just put a separate catch block in there to catch just the object disposed exception and swallow it up and ignore it. That done, everything appears to work fine. Of course, the "solution" makes me a bit nervous as ignoring exceptions is probably not the safest thing to do.....
But maybe it gives a clue to one of you gurus that says what's going on... 'cause this is still too weird to me.
Denise "Hypermommy" Duggan
|
|
|
|
|
Hi Dave,
Dave Kreskowiak wrote: Me.Controls.Remove(dgvProcs) would detroy the dgvProcs object
I'm not with you here. Who would be doing the Dispose?
Are you saying ControlCollection.Remove(x) actively calls x.Dispose()?
(I can't see that in the doc)
or x being removed becomes collectible? from the code dgvProcs is a class member, so this reference is still alive.
Couldn't the problem be that by setting a new DataSource the Columns[] collection got lost?
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Hello everyone,
I have a UserControl, I inserted inside a MenuStrip and a Panel.
This UserControl must be a Panel, when do I upload controls, inserted controls, must be entered panel I inserted in the usercontrol. 
Sorry for my poor English, I hope my problem is clear.
Thank you 
|
|
|
|
|
eusta wrote: I hope my problem is clear.
Not in the slightest. I have no idea what you're trying to say.
|
|
|
|
|
|
No, it's not... I still have no idea what your on about.
|
|
|
|
|
Hi,
I am new to VB.Net and i am working on School Management project in VB.Net windows application. In that i need to insert the Images of the Students. So i am trying using BLOB Datatype in MySQL, but i am unable to store the image and also the saved image should be retrieved.
So, Please if any one knows the solution of my problem help me and do me the favour.
Thanks in advance,
Victoria
VB.Net
|
|
|
|
|
|
An alternative solution (one that we use in our internet store for product images) would be to save the images, with the student's ID as the name, to the (web?)server.
In your code you can then simply retrieve the necessary image based on the ID.
That way the database size doesn't become an issue, and no need for interpreting, converting or whatever.
Our experience is that searching the file is on average faster than searching from the database.
My advice is free, and you may get what you paid for.
|
|
|
|
|
Hi Johan,
Thanks for your Reply,
I am working on a Desktop application that means windows application, but you are telling in Web application it seems.
I am sorry if i was wrong with your answer because i am new to .Net, So i am in the beginning stage only.
If you dont mind, can u give me the detailed solution for this.
Thanks in advance,
Victoria
VB.Net
|
|
|
|
|
I thought you were working with a web application because of the MySQL database (which is usually used for web sites).
For the solution I suggested it doesn't matter though, the principle is pretty much the same.
I assume that you want the show the students' pictures when browsing through the student list.
So basically you follow these steps:
1. Each student has a unique ID: save each student's picture as [StudentID].jpg, in a folder that your application can access (for example a shared folder on the same server the database is on.)
2. On the form that shows the student's information, I assume you have a picture box, that should show the student's picture. Use Imports System.Drawing.Imaging and PictureBox1.Image = New Bitmap(Image.FromFile("ThePathToTheSharedFolderHere" & StudentID & ".jpg")) (or something similar, you may have to play around with it a little).
My advice is free, and you may get what you paid for.
|
|
|
|
|
I have Datecs electronic cash register model MP-55B who is connect to PC from COM port but I have not driver for this device, can You help me to write driver for this device
|
|
|
|
|
Hi,
I doubt you need drivers to interact with a simple peripheral such as this one, having a standard interface.
There are several things you should try:
1. find a users/programmers manual (google, contact vendor, ...)
2. hook up to PC, use terminal emulator (HyperTerminal), try some baud rates (start at 9600), watch if you receive anything, if so, is it intelligible text? If it is, either you need a lot of small experiments, or some documentation. Then use the SerialPort class and go ahead.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
for Datecs electronic cash register you need a driver deliver by manufacter.
The driver is cashfile.exe (old version) or Fprintwin
1. Your printer must be conected to a PC using a serial cable
2. You must run driver executable with command line parametrs:
ex. cashfile.exe 4800 COM1 cashfile.inp
cashfile.exe = driver
4800 = bits per second (COM)
Com1 = COM where cash register is connected
cashfile.inp = name of file contain item to list ( it is a sample txt contain item and parametrs)
ex. S,1,______,_,__;TestSell;0.05;1.000;1;1;2;0;0;
P,1,______,_,__;FiscalText;;;;;
T,1,______,_,__;
information for that you can find in manual (www.datecs.bg)
CLiv
|
|
|
|
|
Hi there
I almost have no hair left after tearing it all out to try get composite or s-video input playing on a VB6 form, using the MSVidCtl.dll. I am using the msvidctl quite happily with digital television, and am able to get a fine picture. However, it seems that composite or s-video should be even easier to play, but it is simply not working for me. I have scoured the web to try find out how to do it properly but can't get it to work.
I am starting with a simple VB6 application (has to stay in VB6 for compatibility reasons, preferably using the msvidctl.dll as it is already in use elsewhere in my program). Program also uses Quicktime and Windows Media Player activex controls, but neither of these 2 can play composite or s-video input.
You will require a TV tuner card with a composite or s-video input. You may not actually need the tuner part, so even just a USB capture device should work. I plug an external DVD player into this USB capture device, and I can view DVDs from either composite or s-video inputs using TV Tuner software (Blaze TV), so I know the connection is working.
Anyways, do this:
1. Ensure at least DirectX 9 is installed (run dxdiag from Run and check DirectX version).
2. Create a new VB6 application.
3. Add a Reference to MS Video Control 1.0 Type Library
4. Add MS Video Control 1.0 Type Library as a Component. You will see the blue TV screen with a red circle in the in components window.
5. Add a MSVidCtl object to your form, name it VidControl.
6. Add this code to the Form_Load event:
Dim objTSContainer
Dim objTuningSpace
Dim objTuneRequest
Set objTSContainer = CreateObject("BDATuner.SystemTuningSpaces")
Set objTuningSpace = objTSContainer("AuxIn1")
objTuningSpace.CountryCode = 61 'australia - not really required but may determine PAL/NTSC etc.
Set objTuneRequest = objTuningSpace.CreateTuneRequest
objTuneRequest.Channel = 0 ' 0 = s-video (4-pin connector), 1=composite video (yellow RCA connector)
VidControl.View objTuneRequest
VidControl.Run
7. Run the program.
8. I always get the error "Run time error -1073478249 (c0040597). Method Run of object IMSVidCtl failed" on the VidControl.Run line.
I have tried multiple combinations of tuning spaces like AuxInTuningSpace, trying to find different input devices (which shouldn't be necessary to manually select since I have selected "AuxIn1" tuning space.
Any advice or sample code would be welcomed.
Anthony Sacker
Software Developer, with less and less hair.
|
|
|
|
|
ant999888 wrote: has to stay in VB6 for compatibility reasons
Someone must really hate you, sorry not to be of any support in this, I'm just astounded at the amount of current development in VB6.
Compatibility with what, 486 pcs.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hi Mycroft
I am extending the functionality of a large system developed in VB6 years ago. A rewrite in .Net, which I'd love to do, is out of the question because of the cost of the project, so I have to keep the VB6 project going... 
|
|
|
|
|
Yeah, some people get all the crap jobs, my sympathies.
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
I've never used the control, nor done anything with s-video, so I can't help much.
But, as far as i know, the MS Video Control library only work with Media Center drivers. Does your tuner have MC drivers installed??
|
|
|
|
|
Hi Dave
I am using the MS Video Control on a standard XP Pro system - no Media Center software, other than DirectX 9, is installed. The USB video input device works fine, as I can play my camcorder via the software that came with the USB tuner. I also have a PCI TV tuner card that works fine with VB6 and MS Video Control (i.e. I can play TV using the video control), but when I try access the composite or s-video input, it fails as I described in my original post.
I'm not sure if I can just install Media Center on an XP machine - I thought Media Center was OEM-installed and not available as a standalone install.
Regards
Anthony
|
|
|
|
|
In that case, I have no idea. Your treading in water that few people ever touch. Your question isn't really about VB6 or VB.NET, but the MS Video control.
|
|
|
|
|
Hello, I am searching for a lot of time how to use the MSVidCtl.dll features in VB6 and I didn't find any practical explanation in the web, even in MSDN documentation. So I enjoyed to find your topic with a begining of solution, and I tried your method to add this ressource to a VB6 form. I could successfuly add a reference to MS Video Control 1.0 Type Library, but when I tried to add MS Video Control 1.0 library as a component, I got the following message "Dependances circulaires entre modules" and I couldn't add it. So, please, if you have any explanation and solution to by-pass this problem and make the library availaible under VB6, I would be very grateful to you. My purpose is only to get the power status of my monitor from a VB application, and the only way I found for that is to use "IMSVidDevice::get_Power", which I understand to be a method from MSVidCtl. Best regards
|
|
|
|
|
I'd ask why you're replying to a thread from 14 years ago; but given you're still using a language that's been dead for twenty years, somehow I'm not surprised. 
"These people looked deep within my soul and assigned me a number based on the order in which I joined."
- Homer
|
|
|
|
|
Hello,
Thank you for your attention.
I can understand your surprise, and I've been surprised myself to get an answer after such a long time !
First, I've never been a software developer, I'm just an aerospatial engineer retired for a long time.
When retired, I begun to write applications for my personal use. It was under XP. I used first vbscript, then Excel/VBA and I discovered that it's not possible to write big real-time applications with them. So I got a VB6 license and I wrote successfuly some rather complex applications with it.
I also discovered that, even if these languages are all "VB" ones, you have each time to learn a new syntax and a new way of writing. That's the reason for what I didn't want to migrate to VB.net or other language.
Then, it was vista, win7, win10... I succeeded to reinstall VB6 under win10, and to run my programs with some minor corrections.
BUT, doing that, I lost the integrated help... So I need to use the on-line MSDN documentation (but µsoft doesn't continue to support VB6 and all the examples I can find are in VB.net or C++). Sometimes it helps me, sometimes not !
So I finally have to search in the web forums the answers to my questions.
Doing that, I discovered in the original post the existence of the MSVidCtl library and the possibility to use it in VB6. I think it can bring me a solution to my need to retrieve the power status of my monitor.
I finally succeeded to make it appear in my VB6 objects list, and when I declare : "Dim display as IMSVidDevice" i get no error.
When writing "ret = display. ", the editor proposes effectively (the wanted method) "Power". Now, for the different reasons above, I can't successfuly use the desired function.
Neither "ret = display.Power" nor "ret = display.Power (p)" works correctly, and with no help I finally will lose my last hairs (and perhaps my wife !!..)
So, if somebody could help me, it would be very very kind of him.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
