Re: Putting out plain text - C / C++ / MFC Discussion Boards

Stuart Dootson1-May-09 15:22

1-May-09 15:22

You don't have to 'mimic' a breakpoint when you have enabled debug information in the Release build - just put one in as with a Debug build. The only problem is that as optimisations are turned on, you'll find the following problems:

Some, or possibly all, local data items won't be accessible - hte compiler may have optimised away all need for them
Some lines of code won't take a breakpoint. This is because they've been optimised away.
The assembly language can be more difficult to trace to the source than when optimisations are turned off

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Putting out plain text

BobInNJ1-May-09 8:09

BobInNJ

1-May-09 8:09

I am currently writing an application using C++ and MFC. I need to put out about 100 words of text that are instructions to the user. I am doing this by using the method CDC::TextOut in my OnPaint routine. However, something about doing it this way does not seem right to me. I am also concerned that there maybe formatting issues. That is, the text does not look particular nice. I am hoping there is a better way to put this text out. Any ideas?

Thanks

Bob

Re: Putting out plain text

David Crow1-May-09 8:19

David Crow

1-May-09 8:19

BobInNJ wrote:
I am doing this by using the method CDC::TextOut in my OnPaint routine.

Does this mean you have an SDI or MDI application? If so, and the view based on CFormView, you could add a static control to the top of it and write the instructions there.

Another option would be a modeless dialog. It could contain the instructions while still allowing you to interact with the parent window.

"Old age is like a bank account. You withdraw later in life what you have deposited along the way." - Unknown

"Fireproof doesn't mean the fire will never come. It means when the fire comes that you will be able to withstand it." - Michael Simmons

Re: Putting out plain text

BobInNJ1-May-09 10:00

BobInNJ

1-May-09 10:00

Thanks for the response. I am not using the document view architecture. Therefore, I conclude that
my application is not SDI or MDI.

Bob

Re: Putting out plain text

David Crow1-May-09 10:03

David Crow

1-May-09 10:03

Ok, you either use a separate, modeless dialog for the instructions, or put a static control on your dialog for them.

Re: Putting out plain text

Maximilien1-May-09 8:24

Maximilien

1-May-09 8:24

(without much context, I cannot offer more help )

Why not simply creating a dialog (modal or modeless) and display the text in a simple multi-line edit box ?

This signature was proudly tested on animals.

Re: Putting out plain text

C^hris L^osinger1-May-09 9:07

C^hris L^osinger

1-May-09 9:07

can you put an HTML control on the window and then write your text in HTML ?

Using the WebBrowser control, simplified.[^]

image processing toolkits | batch image processing

Re: Putting out plain text

BobInNJ2-May-09 4:41

BobInNJ

2-May-09 4:41

Thanks for all the responses. After looking at the alternatives, I came to the conclusion that just putting out plain text using TextOut was the way to go.

Bob

show the picture in the same window of MFC insted of showing in new window

trinhminhson1-May-09 8:00

trinhminhson

1-May-09 8:00

HI , every body ,,

I build an application In MFC that Uses highgui in OpenCV to show the picture in new window ,,

BUT .. I want to show the picture in the same window of MFC insted of showing in new window ,,

I search about it , but I can't find the answer ,,

please tell me the answer step by step ,,

regards ,,

urgent please help basic c

biggiant220001-May-09 6:09

biggiant22000

1-May-09 6:09

The program is to keep records and perform statistical for a class of students.
the class may have up to 40 students. They have 5 quizzes, and all the students are identified by a 4 digit student number
and the program will print the students scores and calculate and print the statistics for each quiz

Student Quiz 1 Quiz 2 Quiz 3 Quiz 4 Quiz 5
1234 78 83 87 91 86
2134 67 77 84 82 79
3124 77 89 93 87 71
High Score 78 89 93 91 86
Low Score 67 77 84 82 71
Average 73.4 83.0 88.2 86.6 78.6

but this is what i have so far

#include<stdio.h>
#define ROW 4
#define COLS 5
int main(void)
{
// Local Declarations
int table [ROW] [COLS] =
{
{1234,52,7,100,78,34}'
{2134,90,36,90,77,30},
{3124,100,45,20,90,70},
{4532,11,17,81,32,77}
};
int line [ROW * COLS];
// Statments
for (int row = 0; row <ROWS;row++)
for (int column =0; column < cols, column++)
line[row * cols + column] = table [row] [column];
for (int row = 0; row <ROWS * cols; row++)
printf("%02d", line [row]);
return 0;
} // main

When i execute im getting 42 errors

Re: urgent please help basic c

biggiant220001-May-09 6:19

biggiant22000

1-May-09 6:19

im stuck i cant seem to complete this
and i cant understan y im gettin 42 errors

Re: urgent please help basic c

C^hris L^osinger1-May-09 6:32

C^hris L^osinger

1-May-09 6:32

biggiant22000 wrote:
When i execute im getting 42 errors

what are the errors ?

{1234,52,7,100,78,34}'

change that ' to a ,

image processing toolkits | batch image processing

Re: urgent please help basic c

David Crow1-May-09 8:20

David Crow

1-May-09 8:20

See here.

Checking if a hotkey is avilable && making a window Always on Top in an application.

Code-o-mat1-May-09 4:02

Code-o-mat

1-May-09 4:02

Hey folks!

Got 2 minor questions i thought i ask here maybe you know an answer to.

First: do you know about any way to check if a given hotkey is available on the system or not? I'm talking about hotkeys you can register using RegisterHotKey[^]. I know this method will fail if the key specified is already registered by someone but if it is not it WILL register the key, but i would like a way to check if i could register it WITHOUT actually doing it (that would happen later on). I know one way would be to try and register it and if it succeeds unregister it again right away but this solution doesn't sound so nice.
Second: I'd like to have a window staying above all other windows that belong to the same process, so it is kind of an always-on-top window but not a system-wide always-on-top window, i do not want this window to stay above all the other windows on the system that belong to different processes.

Thanks in advance for any suggestions.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

led mike1-May-09 4:19

led mike

1-May-09 4:19

Code-o-mat wrote:
do you know about any way to check if a given hotkey is available on the system or not?

From the documentation you linked to:

RegisterHotKey fails if the keystrokes specified for the hot key have already been registered by another hot key.

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Code-o-mat1-May-09 4:51

Code-o-mat

1-May-09 4:51

Thanks for the answer. As i said, i am aware that RegisterHotKey will fail in case the hotkey is already used BUT at the point i want to check if it is available i do not wish to actually register it.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

led mike1-May-09 5:00

led mike

1-May-09 5:00

Code-o-mat wrote:
As i said

Yes you did. My fault, I read your post the first time and missed that part. Unfortunately there might not be another way to do it.

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Code-o-mat1-May-09 5:19

Code-o-mat

1-May-09 5:19

Oh well, i'll go with what i can get, i was just hoping for a more sophisticated way to do it. Thanks. Smile | :)

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Rolf Kristensen1-May-09 11:34

Rolf Kristensen

1-May-09 11:34

If wanting to make a child window always on top in an MDI application:

How to Keep an MDI Window Always on Top[^]

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Code-o-mat1-May-09 22:43

Code-o-mat

1-May-09 22:43

Thanks, i will check if i can use any of that, the project is not an MDI app but an SDI one with a few floating windows and i want one modeless dialog to stay above all the floats.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Rolf Kristensen2-May-09 0:14

Rolf Kristensen

2-May-09 0:14

Then you probably want to check out the SetWindowPos flag WS_EX_TOPMOST

Re: Checking if a hotkey is avilable && making a window Always on Top in an application.

Code-o-mat2-May-09 5:09

Code-o-mat

2-May-09 5:09

The problem with WS_EX_TOPMOST is that it will make the window "globally" always on top, menaing it will cover all non-always-on-top windows on the system but i only want it to cover the windows of itw own process.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <
> Life: great graphics, but the gameplay sux. <

error LNK2019 occurred in vs2008 from compiling source of "3D Graph ActiveX Control"

A&Ms1-May-09 2:09

A&Ms

1-May-09 2:09

Hi every one.
I have used 'NTGraph3D.dll' from [3D Graph ActiveX Control] with out any problem,
But When I want to compile the source using Visula Studio 2008 SP1 the below error occurred!

GraphCtl.obj : error LNK2019: unresolved external symbol "char * __stdcall _com_util::ConvertBSTRToString(wchar_t *)" (?ConvertBSTRToString@_com_util@@YGPADPA_W@Z) referenced in function "public: void __thiscall CGraphCtl::DrawAxisLabels(struct HDC__ *)" (?DrawAxisLabels@CGraphCtl@@QAEXPAUHDC__@@@Z)
.\Debug/NTGraph3D.dll : fatal error LNK1120: 1 unresolved externals

any one could help??

or how could I use the source of this control in my program
instead of ActiveX control prepared by the source.[thanks]

Re: error LNK2019 occurred in vs2008 from compiling source of "3D Graph ActiveX Control"

David Crow1-May-09 3:11

David Crow

1-May-09 3:11

Amir_m wrote:
any one could help??

Have you read this?

Re: error LNK2019 occurred in vs2008 from compiling source of "3D Graph ActiveX Control"

A&Ms1-May-09 4:18

A&Ms

1-May-09 4:18

of course, but I was confused with so much cases that generate this error,
Only I know that this function in its last 7 lines cause the error, if you cuold recognize it please tell me.

void CGraphCtl::DrawAxisLabels(HDC hdc)
{

	float X,Y,Z,res;
	int i;
	char str[50]; 
	CPoint3D pt;

	COLORREF colX, colY, colZ;
	OleTranslateColor(m_clrXGridColor, m_hPal, &colX);
	OleTranslateColor(m_clrYGridColor, m_hPal, &colY);
	OleTranslateColor(m_clrZGridColor, m_hPal, &colZ);


// Draw X Grid Label
	res = (dRangeX[MAX] - dRangeX[MIN]) / m_nGridX ;
	
	for ( i = 0 ; i <= m_nGridX ; i++)
	{
		X = dRangeX[MIN] + (res * (float)i);
		sprintf(str,"%g",X);

		X = ((float)i)/m_nGridX;
	
		// red x axis
		//glColor3f(1.f,0.f,0.f);
		SetColor(colX);

		pt=CPoint3D(-0.5,-0.5,0.5);
		pt.Translate(X,0.0,0.3);
		
		PrintText(hdc, pt, str);
	}
		
// Draw Y Grid Label
	res = (dRangeY[MAX] - dRangeY[MIN]) / m_nGridY ;
	
	for ( i = 0 ; i <= m_nGridY ; i++)
	{
		Y = dRangeY[MIN] + (res * (float)i) ;
		sprintf(str,"%g",Y);

        Y = ((float)i)/m_nGridY;
		
		// green y axis
		//glColor3f(0.f,1.f,0.f);
		SetColor(colY);
		
		pt = CPoint3D(-0.5,-0.5,0.5);
		pt.Translate(0.0,Y,0.3);
		PrintText(hdc, pt, str);
	}		

// Draw Z Grid Label
	res = (dRangeZ[MAX] - dRangeZ[MIN]) / m_nGridZ ;
	
	for ( i = 0 ; i <= m_nGridZ ; i++)
	{
		Z = dRangeZ[MIN] + (res * (float)i) ;
		sprintf(str,"%g",Z);

		Z = ((float)i)/m_nGridZ;

		// blue z axis
		//glColor3f(0.f,0.f,1.f);
		SetColor(colZ);

		pt = CPoint3D(0.5,-0.5,-0.5);
		pt.Translate (0.2,0.0,Z);
		PrintText(hdc, pt, str);

	}		

	// Draw Axis Titles
    SetColor(RGB(0,0,0));

	// Native C++ compiler COM support 
	// BSTR, VARIANT wrappers header
	using namespace _com_util; 

	SetColor(colX);
	PrintText(hdc,CPoint3D(0.0f,0.7f,-0.5f),ConvertBSTRToString(m_bstrXLabel));
	SetColor(colY);
	PrintText(hdc,CPoint3D(0.7f,0.0f,-0.5f),ConvertBSTRToString(m_bstrYLabel));
	SetColor(colZ);
	PrintText(hdc,CPoint3D(-0.5f,0.7f,0.0f),ConvertBSTRToString(m_bstrZLabel));

	glEnd();

}

[thanks]

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.