Re: How to use GDI+ 1.1? - C / C++ / MFC Discussion Boards

Re: How to recieve a User defined messages in Win32 Console based [MFC supported] application from any other running Exe.

PankajB8-Apr-09 20:16

PankajB

8-Apr-09 20:16

Sorry Buddy. I am not very good at this.

Let me share the full scenerio with you.

There is an application let's say SENDER that will send a user defined message.
We have another application RECIEVER, a Win32 Console application, that needs to recieve that message and on the basis of that message need to do some processing.

Now, as per your suggestion, lets say I have Created a window using CreateWindow API. After this what should I do OR what am I suppose to do?

In case you need any further information from my side, then please let me know. Thanks.

Re: How to recieve a User defined messages in Win32 Console based [MFC supported] application from any other running Exe.

«_Superman_»8-Apr-09 20:36

«_Superman_»

8-Apr-09 20:36

I recommend the event mechanism rather than sending messages.

Do this in the RECEIVER in a separate thread if needed.

HANDLE hEvent = CreateEvent(0, 0, 0, "MYMESSAGE");
WaitForSingleObject(hEvent, INFINITE);

Do this in the SENDER

HANDLE hEvent = CreateEvent(0, 0, 0, "MYMESSAGE");
SetEvent(hEvent);

«_Superman_»
I love work. It gives me something to do between weekends.

Re: How to recieve a User defined messages in Win32 Console based [MFC supported] application from any other running Exe.

Paresh Chitte8-Apr-09 20:22

Paresh Chitte

8-Apr-09 20:22

Is How to send a user-defined message with SendMessage, PostMessage or PostThreadMessage[^] is helpful ?

Regards,
Paresh.

Re: How to recieve a User defined messages in Win32 Console based [MFC supported] application from any other running Exe.

PankajB8-Apr-09 20:30

PankajB

8-Apr-09 20:30

Thanks for your help Paresh.
I know, how to send and recieve user defined messages in VC++ MFC based applications i.e., Dialog based/Doc View based application.

My main problem is to recieve user defined message in Win32 console based application. Though sending messages is not a problem. Problem is only to recieve the same.

Thanks

Re: How to recieve a User defined messages in Win32 Console based [MFC supported] application from any other running Exe.

Paresh Chitte8-Apr-09 21:01

Paresh Chitte

8-Apr-09 21:01

Did you mean, your console base application is running and you want to communicate to that application ?

Are you looking for something like IPC ?

If Yes, Please refer more information on IPC at here[^].

Regards,
Paresh.

How to use GDI+ 1.1?

Parthi_Appu8-Apr-09 19:05

Parthi_Appu

8-Apr-09 19:05

Hi All,
Is there a way we can startup the GDI+ 1.1 version?
If so what changes are required to use GDI+ 1.1?

Thanx.

Do your Duty and Don't expect the Result

Re: How to use GDI+ 1.1?

Iain Clarke, Warrior Programmer8-Apr-09 23:05

Iain Clarke, Warrior Programmer

8-Apr-09 23:05

1/ How did you learn about GDI+ 1.1?
2/ Did you search on microsoft? They probably know a thing or two about it.

I typed "GDI+ 1.1" into their search box, and this was the following link:
http://www.microsoft.com/communities/newsgroups/en-us/default.aspx?dg=microsoft.public.platformsdk.gdi&tid=9fd5c32d-07c6-4777-833c-6b47e1273b95&cat=&lang=&cr=&sloc=&p=1[^]
To take a quote from it:
No, it is not redistributable per EULA of office 2003 and Windows Vista.

So, you'll need to be running on vista, or require users to by O2k3.

Also:
How do I get GDI+ 1.1 to work with my app ?[^]
and
http://social.msdn.microsoft.com/forums/en-US/windowssdk/thread/7cb9ce0e-1782-49b3-bc48-9549b8b0ab90/[^]

Hope that helps,

Iain.

In the process of moving to Sweden for love (awwww).
If you're in Scandinavia and want an MVP on the payroll (or happy with a remote worker), give me a job!

Re: How to use GDI+ 1.1?

Parthi_Appu8-Apr-09 23:26

Parthi_Appu

8-Apr-09 23:26

Hi Iain,
Thanx for the info.
Actually i have to develope a simple photo editing tool. so i was looking for the APIs in GDI+ and i found some of them interesting, unfortunatly they are of version 1.1 Unsure | :~

Do your Duty and Don't expect the Result

Re: How to use GDI+ 1.1?

amurgshere10-May-11 2:17

amurgshere

10-May-11 2:17

I have made a GDI+ 1.1 Library up in C#, it even includes full legacy emulation (albeit a bit slower than the using GPU like the GDI+ 1.1 does) for when the client machine is windows XP, you can find it here with full source:

http://csharpgdiplus11.codeplex.com/[^]

Re: How to use GDI+ 1.1?

Iain Clarke, Warrior Programmer10-May-11 2:46

Iain Clarke, Warrior Programmer

10-May-11 2:46

I'm sure that's very clever stuff, but I suspect the person who asked the question will be even more interested than me.

(Well done though!)

Iain.

I am one of "those foreigners coming over here and stealing our jobs". Yay me!

How can I delete a file after conversion to another format?

002comp8-Apr-09 18:47

002comp

8-Apr-09 18:47

Hello Friends
I m converting a .AVI file to .MOV file but after conversion I hv to delete the .AVI file but it is not deleteing.
May b its b'coz of Access (means that AVI file is in use),
b'coz i used DeleteFile,remove,_unlink,system().
Please Suggest me some solution.

Regards & Thanks
Yogesh

Re: How can I delete a file after conversion to another format?

«_Superman_»8-Apr-09 19:26

«_Superman_»

8-Apr-09 19:26

If you are using Windows APIs to open the AVI file, there are 2 possibilities.
You can either use the FILE_FLAG_DELETE_ON_CLOSE flag with CreateFile, or use DeleteFile to delete the file after use. In both cases, the file has to be first closed using CloseHandle.

If you are using a third party conversion library, it will have some similar function to close the source file or delete it after close.

«_Superman_»
I love work. It gives me something to do between weekends.

Re: How can I delete a file after conversion to another format?

002comp8-Apr-09 20:14

002comp

8-Apr-09 20:14

I m using ConvertFileToMovieFile(&FSSource,
FDestName,
FOUR_CHAR_CODE('TVOD'),
smSystemScript,
NULL,
myFlags,
NULL,
NULL,
0L);
and myFlags = createMovieFileDeleteCurFile | showUserSettingsDialog | movieFileSpecValid | movieToFileOnlyExport;

.

Re: How can I delete a file after conversion to another format?

Eytukan8-Apr-09 19:31

Eytukan

8-Apr-09 19:31

yogeshs wrote:
May b its b'coz of Access (means that AVI file is in use),

It's really bad. If you had not mentioned this one you could be spared. You know the reason why you are not able to delete it , but are you asking the same question again? No matter what delete function you use, DeleteFile, BombFile, NukeFile, nothing will work until you close() your file. Just close it after you are done with your conversion. There's no other reason why it cannot be deleted.

Starting to think people post kid pics in their profiles because that was the last time they were cute - Jeremy.

Re: How can I delete a file after conversion to another format?

002comp8-Apr-09 21:16

002comp

8-Apr-09 21:16

I m using closeMovieFile(refnum),but still it is not deleting.

CRichEditCtrl subclass [modified]

vijayarani8-Apr-09 16:24

vijayarani

8-Apr-09 16:24

Hi Everybody,

I need a help regarding subclassing CRichEditCtrl....

I have create the class MyRichEditCtrl using base class as CRichEditCtrl. I want to override "SetSelectionCharFormat" function in my subclass. It has to do the same functionality as the base class function + more. Pls any one help.

vijay

modified on Wednesday, April 8, 2009 11:36 PM

Re: CRichEditCtrl subclass

«_Superman_»8-Apr-09 20:07

«_Superman_»

8-Apr-09 20:07

BOOL MyRichEditCtrl::SetSelectionCharFormat(CHARFORMAT2& cf)
{
    CRichEditCtrl::SetSelectionCharFormat(cf);
    + more
}

«_Superman_»
I love work. It gives me something to do between weekends.

Can we invoke any event as a Mouse Left/Right button action?

THAQCD8-Apr-09 16:07

THAQCD

8-Apr-09 16:07

I would like to select Window objects (Start, File, Close, Minimize, Maximize ...) as a real mouse, however I don't have a real mouse, but I can use my capture coordinate to move the mouse as the following:

SetCapture();
SetCursorPos(pos_X, pos_Y);
ReleaseCapture();

By any chance, when my pointer (pos_X, pos_Y) pointing at a Window object, can I invoke any command, event to do as Left/Right-Click like the real Left/Right mouse buttons?

Many thanks for any help. D'Oh! | :doh:

Re: Can we invoke any event as a Mouse Left/Right button action?

Jijo.Raj8-Apr-09 18:04

Jijo.Raj

8-Apr-09 18:04

Hello THAQCD,

You can use - SendInput()[^] to simulate mouse events.

This article will help you - Windows SDK User Interface: How can I emulate mouse events in an application?[^].

Regards,
Jijo.

_____________________________________________________

http://weseetips.com[^] Visual C++ tips and tricks. Updated daily.

Re: Can we invoke any event as a Mouse Left/Right button action?

THAQCD9-Apr-09 8:18

THAQCD

9-Apr-09 8:18

Follow your links, now I am able to do what I ask for.

Thanks Smile | :)

help me ... i have some errors

kiemxai8-Apr-09 10:37

kiemxai

8-Apr-09 10:37

use funtion to count this sum:
s=a1*a2+a2*a3+a3*a4+...
I did,but have error:

#include "stdafx.h"
#include<iostream>
#include<cmath>
using namespace std;
void sum(int a[],int n)
{
int sum;
sum=0;
for(int i=1;i<n;i++)
sum=sum+ a[i]*a[i+1];
cout<<"sum="<<sum<<endl;
}
int main()
{
int a[100];
int n;
cout<<"enter n:"<<endl;
scanf("%d",&n);
cout<<"enter numbers of array ";
for(int i=1;i<n;i++)

scanf("%d ",&a[i]);
sum(a[100],n);
getchar();
}
but when running, this error : error C2664: 'sum' : cannot convert parameter 1 from 'int' to 'int []'

can you help me edit that code .can you send me your answer into my email: doiphongba_ht2000@yahoo.com
thank you very much

Re: help me ... i have some errors

Stuart Dootson8-Apr-09 11:01

Stuart Dootson

8-Apr-09 11:01

That's because a[100] refers to the 101st item of a (which doesn't exist anyway). To refer to the array, just use a.

Just be aware that arrays in C/C++ do not carry any information regarding the size of the array - if you need to process variable size arrays, you need to specify the array size.

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

problems with converting from string to int

Aljaz1118-Apr-09 10:32

Aljaz111

8-Apr-09 10:32

I have Cstring a. If button1 is pressed a="1". If button1 is pressed again a=a+"1". Now i want this a to be converted into integer or double.

Thanks

Re: problems with converting from string to int

Stuart Dootson8-Apr-09 10:57

Stuart Dootson

8-Apr-09 10:57

_ttoi[^], _ttof[^]?

Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p

Re: problems with converting from string to int

Aljaz1118-Apr-09 11:26

Aljaz111

8-Apr-09 11:26

for:
CString a="111"
double x=_ttoi[a] doesn't work..

1 thing more..
How to delete decimals and dot for decimals for double x with string.format(...,x)?

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.