|
markymark82 wrote: If the users are going to continue using desktop apps then they'll want to update from a web service.
So you mean if i develop a project management software as a desktop application at first instance using only C# and SQL and then later once the product is developed, i can use web services to use it with in whole company ?
|
|
|
|
|
If you want to use it throughout the company, and users are using desktop software, then obviously that software will need to be rolled out to all users who'll need it. It can then connect to various web services for updates etc.
These web services could also be connected to by any other desktop (or even web) applications that you develop later on.
A web application is more self contained (please people correct me if I'm being completely misleading), and so can be accessed only by itself. This would be centrally accessed by all users who wouldn't then need their desktop applications (these would be re-written as the web application).
I hope that makes sense, and I'm not just confusing matters further
|
|
|
|
|
Hi experts.
iam using iframe in my web page.how to set the height of the iframe dynamically in c#.
iam assigining src attriubute in the code behind like this
HtmlControl frame1 = (HtmlControl)this.FindControl("iframename");
frame1.Attributes["src"] = getdetails.Bookingdata;
iam getting the data but i cant set the height automatically. i want to increase the height of my webpage depending upon the content of iframe.
regards
venu..
|
|
|
|
|
Hi all,
I'm looking at creating a system on our website to redirect abnormally large volumes of visitors to a holding page to limit the amount of bandwidth being used to keep our website working at a reasonable speed (The holding page would use virtually no bandwidth and would auto refresh to check if they can gain access yet or not).
What I'm after is to say if there are more than say 800 connections to the website, those over the 800 get assigned a queue number and sent to a holding page until a connection is free.
I had an idea to do it with Application variables and sessions, ie:
on Session_Start Application["CurrentConnCount"] = itself + 1
on Session_End Application["CurrentConnCount"] = itself - 1
However, the Session_End event can't be relied upon to be fired if a session just times out.
Is there another way I can do this, it all sounded nice and easy in my head, but the execution is currently eluding me.
I know I can limit the number of connections using iis, but this returns 'Service is Unavailable' and does not care if someone is in the middle of a transaction or not so isn't suitable.
Can I look at the number of current connections to the website using .net, rather than relying on events that may or may not be fired?
Thanks in advance for any help, I hope that all made sense and I'm not talking complete jibberish...
|
|
|
|
|
Hello All,
when i try to debug in VS2008 then build success then i got error:
"Unable to start debugging on the web server. Debugging failed because integrated Windows authentication is not enabled. Please see Help for assistance."
can you pls tell me what is solution for that?
Thanks
Anish Patel
|
|
|
|
|
anish27patel wrote: "Unable to start debugging on the web server. Debugging failed because integrated Windows authentication is not enabled. Please see Help for assistance."
I think, you have hosted sites on IIS and trying to debug from VS. Just go to IIS > Right Click VD > Properties > Authentication > Edit > Select Windows Authentication.
That's all do for you 
cheers,
Abhijit
CodeProject MVP
|
|
|
|
|
thanks for reply but i already tried that but not working same error is coming.
Anish Patel
|
|
|
|
|
please check weather Web.config placed properly or not?
cheers,
Abhijit
CodeProject MVP
|
|
|
|
|
Hello All,
I'm using ASP.NET 2008 (C#). I have created unit test project for my aspx page
after debugging it gives me error as follows
"Failed Page_LoadTest IndigoLogintest The communication channel with ASP.NET could not be configured. Requested Service not found "
Can someone please help me why I'm getting this error.
Thanks in advance.
|
|
|
|
|
Yes Even i am getting the same error given below.
"The communication channel with ASP.NET could not be configured. Requested Service not found"
|
|
|
|
|
Hi,
I am using VS 2003 with crystal report in it. I have develop a web site with crystal report for one of company client. I have done the below solution. I place the contain of release folder [setup (application), setup(config file) and an installer package] to bin folder in hosting. But still i am getting the errors
Cannot find KeycodeV2.dll, or invalid keycode.
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: CrystalDecisions.CrystalReports.Engine.InternalException: Cannot find KeycodeV2.dll, or invalid keycode.
What i should do?? Pls its quiet urgent.....any help appreciate...
>Finding Out What the Crystal Report Distribution Key is on VS.NET 2003:
>
> 1- Open VS.NET 2003
> 2- Click on Help Menu Option
> 3- Choose "About Microsoft Development Environment"
> 4- Look under Crystal Reports for Visual Studio .NET, you will see a 19
> character number, which is the Distribution Key Code:
>
> Example: AAA00-BB00000-C0000DD
>
> Producing the Deployment Project:
>
> Open Solution Explorer, right click on the “Solution Name” at the top
> and Add a New Project. On the window that appears, move to Setup and
> Deployment Projects. Click on Setup Project (not the wizard), put a name
> for your deployment project (make a note of the location where the
> folder that the deployment project will be created in) and then click
> OK. A File System dialog will appear – solution explorer should be
> displayed on the left of screen. Within solution explorer – right click
> over your deployment project and select Add – Project Output. Another
> window will appear – select Primary Output (make sure configuration is
> showing Active) and click OK. This will result in the detected
> dependencies being updated & a primary output icon appearing in the
> deployment project. Right click on the deployment project name again and
> Add – Merge Modules. Add the following modules.
>
> Crystal_Database_Access2003.msm
> Crystal_Database_Access2003_enu.msm
> Crystal_Managed2003.msm
> Crystal_regwiz2003.msm
> VC_User_CRT71_RTL_X86_---.msm
> VC_User_STL71_RTL_X86_---.msm
>
> These were the appropriate modules for my application given that I am
> using VS 2003. Yours may be slightly different.
>
> Right click on Crystal_regwiz2003.msm and go to its properties. Enlarge
> the MergeModuleProperties tree and enter the product licence key.
>
> Go onto Build – Configuration Manager . Check that the Project &
> Deployment Project which appear are set to “Release” and the Build check
> box for each is checked. Build the Project. If all is well the build
> should show no errors.
>
> If this has gone according to plan you should now have (in the folder
> specified in the “location” window given when you added your deployment
> project) a debug and release folder. The release folder will contain:
>
> - setup (application)
> - setup (config file)
> - an installer package
>
> The release folder is all that is needed to deploy the application on
> another machine.
|
|
|
|
|
|
I have done it previously but no success. Just wondering whether the contain of the release folder (setup - application, setup - config and installer) have to be run on hosting or place it in bin folder?
I called the hosting guy, he said they dont allow to run it...
i am totaly lost....dont know what else to do...
|
|
|
|
|
i need to get whois records of a few thousand domain which are stored in our database.
i need registrant name,name server info, creation date and expiration date records. i can get whois records of some domains via whois servers but each whois server returning different whois record formats. where i can receive whois records same format. i hope you can understand me and help me?
viva la commune
|
|
|
|
|
Hi all,
am having datagrid in my application,I am binding somw data which is in hindi font.
It is not showing properly in some rows data,and if i use gridview all rows are displaying proper font.
why it is not showing hindi font in datagrid control.
I am assiging fontname property correctly.Some rows only havng this problem.any solution for this?
If you r free then reply me
kissy
|
|
|
|
|
I think font should be available to the browser to show the font properly. You need to build an installer which will install the font, and request the user to download it and run before viewing the page.
Hope you understand.
|
|
|
|
|
yes it is available and showing some rows correctly,only for some rows it is giving this problem.
I am not understanding how it will work for somw rows in the same grid?
kissy
|
|
|
|
|
Hi frnd,
I am working on dundas chart-and CHart type is Column(3D).
I am facing problem with the width of the Series.
What i need is-the fixed width of the series irrespective of the number(point count) of the series.
Thanking u in advance...![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
|
|
|
|
|
Hello
every one !!
I have been working on a page that has included master page.
i need to call javascript function that is defined inside
<asp:content xmlns:asp="#unknown"> of same page.
The call to javascript is made when page is viewed in IE 7.0.
But when same page is viewed in mozilla firefox,
there is no call to javascript function.
Javascript function defined in a Page without master page,
works properly irrespective of browser.
However problem to call Javascript function occurs when there is
a master page included i.e. asp:content and mozilla firefox.
any one have any suggestion ?
Thanks in advance.
|
|
|
|
|
|
Hi All,
I am using Ajax Popupcontrol to show a Gridview as a popup control. The gridview is embedded in a Panel.
In this scenario user will select the code (eg Client No) in the autocomplete text box and will click search. Then it will popup the gridview showing records(quotations) related to the selected Cilent No.
I want to hide showing Popupcontrol when the user click on search button without specifying a client no(and possibly diplay some error msg).
I have tried few javascipts but all of them tend to show the empty panel as popup.
Can anybody suggest me how can I achieve this?
Another issue is Suppose a user first search Quotation for Client 1. Then when user trys to search Quotations for Client 2, First the popup will show the records relared to first search and then refreshes with records related to client 2. How Can I avoid this?
Thanx in advance 
samitha
|
|
|
|
|
try
Apurv
“Never trust a computer you can’t throw out a window.”
(Steve Wozniak)
“There are only two industries that refer to their customers as ‘users’.”
(Edward Tufte)
|
|
|
|
|
try
ModalPopupExtender1.Hide()
Apurv
“Never trust a computer you can’t throw out a window.”
(Steve Wozniak)
“There are only two industries that refer to their customers as ‘users’.”
(Edward Tufte)
|
|
|
|
|
You may want to look this up:
[^]
Goofd luck
Dan - rastaquere AATT gmail doott COM
|
|
|
|
|
hi,
i want to make a discussion forum for my website, bt i have no idea how to do it. can some one plz help me with how to start.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
