|
I'm still trying to figure out what security scenario you are trying to protect from. Some sort of forensic analysis of memory (like wiping a hard drive)? Sorry if I misunderstand.
But the whole concept is fraught with problems. As you said, .NET and Windows is free to move and copy memory at will. Virtually any string operation will make a copy of the original string(s). What about, paging to disk? That would seem to be much more of a vulnerability.
Also, what about interning? Someone correct me if I am wrong but, doing something like this:
string firstString = "abc";
string secondString = "abc";
SecureWipe(FirstString);
...could potentially destroy the contents of secondString (because of the unsafe code pointing to the intern'ed string).
Besides, as Dave said (above), if you did something like this:
string firstString = "abc";
string secondString = "xyz";
secureWipe(firstString);
secureWipe(secondString);
firstString and secondString would likely be overwritten with the same "random" character sequence. That's not "secure". Move the instance of Random() outside of SecureWipe() so it is only executed once.
|
|
|
|
|
First off, this is really more of a proof of concept than a final roduct. More extensions, or perhapse a new SecureString class, could be created to handle copy, concat, modify, etc. The basic goal is to scramble strings when your done with them so that leftover strings in memory don't contain any sensitive data, and maybe encrypt the string until it needs to be read. It tries to solve the same general problem that the SecureString class in the .NET framework does.
It is possible to pin data in memory with .NET, so preventing it from being moved around by the GC is possible. I'm sure it is also possible to make it part of the non-paged pool of memory for the app, so it will never be swapped to disk. Pulling the Random out is easy to do, too...however even if all strings were scrambled with the same random data, that wouldn't matter...the original data is still gone (overwriting with random is probably moot, since its overwritten with nils and the length shrunk to 0 after, anyway...there isn't any kind of magnetic residue like there is with a hard drive, so I will probably take the random overwrites out and just use \0).
The biggest problem that you mentioned, I think, is the interned strings problem. I am not sure there is a solution to that.
|
|
|
|
|
Does anyone know how to set TabStop in vb.net 2003. I want to set vbTab(0) = 28 and then vbTab(1) = 3 and so on.
|
|
|
|
|
Never used it but list box has CustomTabOffsets property which returns a collection of offsets. Perhaps it would help.
|
|
|
|
|
Mika - Thanks for the interest to resolve this issue.
I used this method below. (Item # from the String format,tab# to stop on the listbox) If (#,-#) that means to list the text on left align and if (#,#) is to list the text on right align.
Dim strfmt As String = "{0,-28}{1,-6}{2,-17}{3,-4}{4,-24}{5,-24}{6,-35}{7,-35}{8,-35}{9,10}{10,-8}{11,-10}{12,-6}{13,-3}{14,-35}{15,-7}{16,-3}{17,-35}{18,-6}{19,-5}{20,-67}{21,-35}{22,-216}{23,-6}{24,-6}{25,-6}{26,-6}{27,-6}{28,-6}{29,-6}"
For Each dr In dt.Rows()
Me.ListBox2.Items.Add(String.Format(strfmt, "", (dr("CB12")), "", (dr("CB13")), "", (dr("CB14")), (dr("CB15")), (dr("CB16")), "", (dr("CB17")), "", (dr("CB18")), "", (dr("CB19")), (dr("CB20")), (dr("cb21")), (dr("CB22")), (dr("Cb23")), "", (dr("cb24")), "", (dr("cb25")), "", (dr("cb26")), (dr("cb27")), (dr("cb28")), (dr("cb29")), (dr("cb30")), (dr("cb31")), (dr("cb32"))))
Next
|
|
|
|
|
Did you try the CustomTabOffsets and add those tab positions to the collection?
I'm just wondering that you have quite a lot of 'columns' you define and use. Could it be possible to use listview instead. I think it would be a lot easier to handle the visualization with that since you can define actual columns in listview and use them.
|
|
|
|
|
If you can show me to set the tabbing in the listbox I would appreciate it. Yes I do have a lot of tab stops.
|
|
|
|
|
I would just like to say how much I loathe and detest ClickOnce - does it actually work?
|
|
|
|
|
Yup, works great if you only need to deploy (and regularly update) a single executable. It's a cool feature if you only use it to distribute prototypes across your LAN.
I haven't used it for anything complex though - InstallShield does it's job so well that I'm not going to frustrate myself with complex ClickOnce-setups 
I are troll
|
|
|
|
|
I have some different requirements for my application. My application generates a well formatted XML which needs to be stored in database as string data or as file in some version controlled system. I am planning to create provider factory that will generate an object to interact either database or version control system. I like to control this thru my web.config file. How can I achieve this?
M.Sendilkumar
|
|
|
|
|
One way to do this would be through a pattern called Dependency Injection. Microsoft have released an application block called the Unity Application Block[^] which you can use to this end.
|
|
|
|
|
As Pete said, The Unity Application Block should help.
Just to save your fingers this CP article[^] might help get a handle on it.
Henry Minute
If you open a can of worms, any viable solution *MUST* involve a larger can.
|
|
|
|
|
Dear all :
I create a simple code (window application) like following
Private Sub Button1_Click()
Dim Obj As Object
Dim asm As Assembly = Assembly.LoadFrom("TestApp.dll")
Dim ty As Type = asm.GetType("TestApp.appServ")
Obj = Activator.CreateInstance(ty)
Dim Istring As String = Obj.funct()
MessageBox.Show(Istring)
Obj.Dispose()
GC.SuppressFinalize(Obj)
Obj = Nothing
end sub
while TestApp.dll code follow that
using System;
using System.Collections.Generic;
using System.Text;
namespace TestApp
{
public class appServ : IDisposable
{
private bool disposed = false;
public string funct()
{
return "aad";
}
~appServ()
{
// call Dispose with false. Since we're in the
// destructor call, the managed resources will be
// disposed of anyways.
Dispose(false);
}
protected virtual void Dispose(bool disposing)
{
if (!disposed)
{
if (disposing)
{
// dispose-only, i.e. non-finalizable logic
}
// shared cleanup logic
disposed = true;
}
}
public void Dispose()
{
Dispose(true);
GC.SuppressFinalize(this);
GC.Collect();
}
}
}
Before the button click the "TestApp.dll" allow be overwrite
but after button click , the file is locked until the main program exit.
Can anyone tell me how to solve it ?
Thanks
Michael 
|
|
|
|
|
Michael Yip wrote: Can anyone tell me how to solve it ?
AFAIK, you can't. Once a process loads a .DLL, the file stays locked for the lifetime of the process that loaded it, even if you dispose of all objects created from it and even if you load the .DLL into another AppDomain.
|
|
|
|
|
You can't. A dll remains locked until the process that created it ends. If you must have it terminate, you need to load the DLL into a separate AppDomain (which fires off a separate session), and then unload that AppDomain once it's finished with.
|
|
|
|
|
Dear Pete O'Hanlon
Do you mean load all dll in another sub domain , and then terminal main domain ?
If this main domain have reference serval. that mean I need clone all dll into new domain and then kill my current domain
Thanks
|
|
|
|
|
You only kill the other domain, not the primary domain. If you need to have dynamic load/unload capability for "plugin" assemblies, the only way to do that is to have your primary domain spawn another AppDomain, load the pluggable assemblies into that second domain, and unload the second AppDomain after your done using the dynamic assemblies. You can't kill your primary domain, because that would kill your whole app.
|
|
|
|
|
That's a logical problem, not code-based. You can't remove things that are in use. Imagine you drinking coffee, and me trying to remove the cup from your hands.
What you can do however, is launch a second application that doesn't have the reference to the coffeecup. Err, assembly!
Launch app2, close your original app, delete the file, relaunch your original app, exit app2. Look into Process.Start
Hope this helps,
I are troll
|
|
|
|
|
Hi All,
I have a Bulk Copying Process which runs as nightly job puts data from db1 to db2 and scheduled in Windows schedular.
During this time its putting data in 3 files like 1. LogFile, 2. Status.txt and 3. Dat files. As it continues the files sizes increase, when it exceeds the size of existing physical memory, the BCP is failing.
What we need to do is to track if the BCP is failed. If it fails we need to get that information. Either from windows schedular or by calling any com component of emailing and to send the failure information.
Thanks,
Aleem Mohammad.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
|
|
|
|
|
It sounds like what you really need to do is rewrite your code so you're not loading entire files into memory all at once. Since this is just a bulk copy, you can get away with reading and processing one line at a time.
|
|
|
|
|
Sorry I didnt get your point can u please eloborate me.
Thanks & Regards,
Md. Abdul Aleem
NIIT technologies
|
|
|
|
|
The point is you didn't explain anything about the code that's causing the problem. You don't say anything about how it handles these files, why you suspect your using so much RAM, no nothing. So, how can anyone possibly help you.
|
|
|
|
|
If you're talking about the bcp utility which ships with SQL Server, it doesn't read the whole file to memory so you are most likely hitting some other problem. One way to enhance bcp is to use batches.
However, to your question, add -e err_file parameter to the bcp command. That will log the errors to the file specified.
|
|
|
|
|
hi, can someone help me. i am a bit confused on the compatibility of vb.net and ms excel 2007.
im working on a project that would use excel in a form..all the sample codes that i have researched, they didnt say if it'll work with 2007 excel. i really hope that you guys woud help on this.
thanx! kudos...\m/
|
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
