LayoutRTL creating issues in displaying image data - C / C++ / MFC Discussion Boards

Re: Can I handle click events on a static control

Code-o-mat10-Jan-09 5:43

10-Jan-09 5:43

BS_NOTIFY is for buttons, not statics, don't use it on a static, use only SS_NOTIFY. And you won't receive a command message you can handle using ON_COMMAND, you need to use ON_NOTIFY, specifying the ID (make sure this is not the default IDC_STATIC but something else, at least to avoid confusement) of your static and STN_CLICKED, or i think there should be an ON_STN_CLICKED macro somewhere too.

> The problem with computers is that they do what you tell them to do and not what you want them to do. <

Re: Can I handle click events on a static control

Randor 10-Jan-09 6:15

Randor

10-Jan-09 6:15

sashoalm wrote:
I put SS_NOTIFY and BS_NOTIFY style on the static

Sorry about that, I meant to say SS_NOTIFY. You also should change the ID of the CStatic to something other than the default. In your message map add:

ON_STN_CLICKED(IDC_STATIC_YOURNAME, &CYourClass::OnStnClickedStatic)

And in your header:

afx_msg void OnStnClickedStatic();

Best Wishes,
-David Delaune

Re: Can I handle click events on a static control [modified]

sashoalm10-Jan-09 6:59

sashoalm

10-Jan-09 6:59

Could there be something wrong with my static control? It's not working, and I checked that the id is not the default IDC_STATIC.

Here's how the static is defined in the *.rc2 file

LTEXT           "Static",IDC_MY_STATIC_ID,81,198,109,8,
                SS_CENTERIMAGE, SS_NOTIFY

I turned on the message loop tracing with MFC Tracer, but the only WM_LBUTTONUP and WM_LBUTTONDOWN messages were appearing when I was clicking on the static:

WndProc: hwnd=0x5B0BBA, msg = WM_LBUTTONDOWN (0x0001, 0x015700D0)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000000)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000001)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000002)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000003)
WndProc: hwnd=0x5B0BBA, msg = WM_LBUTTONUP (0x0000, 0x015700D0)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000000)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000001)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000002)
WndProc: hwnd=0x5B0BBA, msg = 0x036A (0x0000, 0x00000003)

[Added]
I checked again and the hwnd is actually that of the dialog! The static control didn't receive any event in the first place.

There is sufficient light for those who desire to see, and there is sufficient darkness for those of a contrary disposition.
Blaise Pascal

modified on Saturday, January 10, 2009 1:28 PM

Re: Can I handle click events on a static control

sashoalm10-Jan-09 7:32

sashoalm

10-Jan-09 7:32

I found where the problem is, I had incorrectly written the flags. The dialog was in a *.rc2 file so it had to be edited manually.

Thanks, your solution works now Smile | :)

There is sufficient light for those who desire to see, and there is sufficient darkness for those of a contrary disposition.
Blaise Pascal

Re: Can I handle click events on a static control

Randor 10-Jan-09 7:35

Randor

10-Jan-09 7:35

Glad you have located the problem, I was beginning to scratch my beard with absolute dismay.

Best Wishes,
-David Delaune

Re: Can I handle click events on a static control

Jijo.Raj10-Jan-09 6:57

Jijo.Raj

10-Jan-09 6:57

Be careful that you have to change the default id of static - IDC_STATIC to something else like IDC_STATIC_MY_LABEL. Or else the static will not notify any messages.

Regards,
Jijo.

_____________________________________________________

http://weseetips.com[^] Visual C++ tips and tricks. Updated daily.

Re: Can I handle click events on a static control

sashoalm10-Jan-09 7:04

sashoalm

10-Jan-09 7:04

I checked and double-checked, it has its own id, something like
#define IDC_MY_STATIC 1003
and it's still not working

see my post http://www.codeproject.com/script/Forums/View.aspx?fid=1647&select=2874191&fr=1#xx2874191xx[^]

There is sufficient light for those who desire to see, and there is sufficient darkness for those of a contrary disposition.
Blaise Pascal

LayoutRTL creating issues in displaying image data

Alex@9C10-Jan-09 0:17

Alex@9C

10-Jan-09 0:17

When i applied LAYOUTRTL layout on my window by setting extended window style, everthing went fine. All the contorls, title bar, scroll bar all are now in right to left layout. However the images that were being displayed previously are not being displayed instead of that blank window is being displayed in place of the image data.
I am now totally clueless.

CFile::sharingViolation exception?

AnayKulkarni10-Jan-09 0:05

AnayKulkarni

10-Jan-09 0:05

Hello to all,
First of all let me tell you what I am doing in my project, in my project I am collecting some data from two devices, one device is having USB connector and another device is having serial port (RS232) connector.
Now I will tell you the main problem, In my project I am creating one file and writting the data collected from any one of above device, into that file.The function in which I have written file writting operation code gets called after each 10 seconds. But problem is that when I collect data from device having serial port (RS232) connector then sometimes I get "CFile::sharingViolation" exception in file operation.I am giving my code also here. In below code "CreateRawDataFile()" function gets called after each 10 seconds and this function contains the code regarding file handling operation.

void CMainFrame::CreateRawDataFile()
{
CFile oRawFile;
CFileException ExceptionObj;
if(oRawFileIO.Open(FileName,CFile::modeCreate|CFile::modeNoTruncate|CFile::modeWrite,&ExceptionObj)==FALSE)
{
if(ExceptionObj.m_cause == CFileException::sharingViolation)
{
TRACE("\n Sharing violation");
}
}
else
{
code for writting data in a file
.
.
.
.
oRawFile.Close();
}
}

In above function sometimes I get "CFileException::sharingViolation" exception and then the TRACE statement which I have written gets displayed.Most surprising thing is that this file exception occurs only when I collect the data from the device having serial port (RS232) connector.Also I have checked that call to above function is going exactly after each 10 seconds and not before that.Also data is not much long which will not get written into file within 10 seconds.Most surprisingly it works very much accuratly without any file exception when I collect data from the device having USB connector.

Really I am not getting what exactly happening? Please can any body tell me what to do and how to remove this problem? It is really really very very urgent? Please help me out.

Thanks and Regards,

Anay

Re: CFile::sharingViolation exception?

Stuart Dootson10-Jan-09 0:12

Stuart Dootson

10-Jan-09 0:12

Maybe you have a race condition, where the USB handler has opened the file and then the serial handler tries to open it as well?

If I were you, I hold the file open through the life of the program (make the CFile variable a member of CMainFrame and open it in CMainFrame::Create, close it when the CMainFrame closes). Then there's no worry about the file needing to be shareable, as you won't be trying to open it more than once.

how to deal with HTTP message in Chtmlview(MFC)

maoxintt9-Jan-09 22:56

maoxintt

9-Jan-09 22:56

I build a web browser using Chtmlview.
and now I don't want use "Navigate2" function ,I want to get HTTP request ,which is come from the web browser, and store the this HTTP request,send it to WEB server by myself.

at the other hand , I can acquire the HTTP response by my application , How can I send the response to the web browser built by Chtmlview class.

I mean that how can I send/get the HTTP message between the chtmlview and myself.

Thank you very much!
Lampa

Re: how to deal with HTTP message in Chtmlview(MFC)

Stuart Dootson10-Jan-09 0:06

Stuart Dootson

10-Jan-09 0:06

If you have the HTTP response, extract the body into a string and set it as the CHtmlView's document by extracting the web browser interface pointer with CHtmlView::GetHtmlDocument and using the sample code on this page[^].

Re: how to deal with HTTP message in Chtmlview(MFC)

maoxintt11-Jan-09 1:59

maoxintt

11-Jan-09 1:59

Hello Stuart Dootson:
Thank you for your reply.
Could you tell me how to get the HTTP request from the web browser ,which built by CHtmlView?
That is , when I click the button (or super HTTP link ),and the CHtmlView will generate the HTTP request and send it to WEB server . I want to get the HTTP request, how to do it?
Where can I find the answer?
Thank you again !

Lampa

Re: how to deal with HTTP message in Chtmlview(MFC)

Stuart Dootson11-Jan-09 2:14

Stuart Dootson

11-Jan-09 2:14

maoxintt wrote:
Could you tell me how to get the HTTP request from the web browser

Ah, sorry - thought you'd already done that bit...Anyway, you probably want to use the CHttpFile class in MFC. If you look at this page, Microsoft list the exact steps you need to take to read data over HTTP. Doesn't get better than that!

Re: how to deal with HTTP message in Chtmlview(MFC)

maoxintt11-Jan-09 14:51

maoxintt

11-Jan-09 14:51

Thank you for your reply!
I am a newer for MFC. I have built a web browser using CHtmlView ,and I want to how to get the HTTP request from the web browser using ChtmlView.
I don't familiar with MFC , so could you tell me more about how to get it. I think the CHttpFile is use to handle the response from the WEB server. And I need to do is that how to intercept the HTTP request generated by my web browser.

Lampa

work VB project on VC++ MFC exe

Member 46265689-Jan-09 22:13

Member 4626568

9-Jan-09 22:13

I dont know how to explain this.
I have a Visual Basic project which i wrote it for long time.
Now,I want control VB project from VC++ project.

For Example:
There is a "A" Button, and Text in CString of VC++ project (MFC exe).
when "A" button is pressed.
It will act like "B" button in VB project and Text will show on VB dialog.

I have heard the visual studio has tool for this but i can not find how does it look like..

Looking forward for your advice .
Thank
M

Re: work VB project on VC++ MFC exe

Stuart Dootson9-Jan-09 22:34

Stuart Dootson

9-Jan-09 22:34

Member 4626568 wrote:
I dont know how to explain this.

That's a bad start...

Member 4626568 wrote:
There is a "A" Button, and Text in CString of VC++ project (MFC exe).
when "A" button is pressed.
It will act like "B" button in VB project and Text will show on VB dialog.

So...the VB and VC++ applications are both running and you want to control aspects of the VB app from the VC++ app? Tricky...

Member 4626568 wrote:
I have heard the visual studio has tool for this but i can not find how does it look like.

Nope, can't say as it does.

Re: work VB project on VC++ MFC exe

Hamid_RT9-Jan-09 23:45

Hamid_RT

9-Jan-09 23:45

I dont understand what do you need do you want to convert your code or you want to use of a project on other project?

Of one Essence is the human race
thus has Creation put the base
One Limb impacted is sufficient
For all Others to feel the Mace
(Saadi )

Print preview list control

Member 23588019-Jan-09 21:07

Member 2358801

9-Jan-09 21:07

I have a list control in my View class, (i created a list control using on draw )which I can see it on my main frame. But it does not show up in the print preview. Any help would be appreciated.

Re: Print preview list control

Stuart Dootson9-Jan-09 22:32

Stuart Dootson

9-Jan-09 22:32

You have to draw your data onto the print preview (or, for that matter, the print) youself - all you get is a DC (device context) on which to draw. Control's won't help you with printing.

Re: Print preview list control

Hamid_RT9-Jan-09 23:46

Hamid_RT

9-Jan-09 23:46

How did you make your preview?

Of one Essence is the human race
thus has Creation put the base
One Limb impacted is sufficient
For all Others to feel the Mace
(Saadi )

view in a childframe

Taruni9-Jan-09 18:47

Taruni

9-Jan-09 18:47

Hi,

Could anyone tell me how to create a view using the "Create()" in the child frame and that too the view should completely occupy the ChildFrame's client area.

Thanks in advance

Taruni

Re: view in a childframe

Stuart Dootson9-Jan-09 22:41

Stuart Dootson

9-Jan-09 22:41

Have you tried Googling before asking here? This CodeProject article[^] could give you some pointers.

How to set RTL layout for a CPropertySheet.

Alex@9C9-Jan-09 17:50

Alex@9C

9-Jan-09 17:50

I am to provide RTL Layout for the CPropertySheet.
As it is derived from the CWnd, I am setting WS_EX_LAYOUTRTL as the extended style.
But it is doing nothing. Just added a Debug Assertion Failure to my code.
Please suggest me how can i provide the RTL layout for the CPropertySheet.

<br />
#include "stdafx.h"<br />
#include "CmnCtrl1.h"<br />
#include "propsht.h"<br />
<br />
#ifdef _DEBUG<br />
#define new DEBUG_NEW<br />
#undef THIS_FILE<br />
static char THIS_FILE[] = __FILE__;<br />
#endif<br />
<br />
/////////////////////////////////////////////////////////////////////////////<br />
// CCmnCtrl1App<br />
<br />
BEGIN_MESSAGE_MAP(CCmnCtrl1App, CWinApp)<br />
	//{{AFX_MSG_MAP(CCmnCtrl1App)<br />
	//}}AFX_MSG<br />
	ON_COMMAND(ID_HELP, CWinApp::OnHelp)<br />
END_MESSAGE_MAP()<br />
<br />
/////////////////////////////////////////////////////////////////////////////<br />
// CCmnCtrl1App construction<br />
<br />
CCmnCtrl1App::CCmnCtrl1App()<br />
{<br />
	<br />
}<br />
<br />
/////////////////////////////////////////////////////////////////////////////<br />
// The one and only CCmnCtrl1App object<br />
<br />
CCmnCtrl1App theApp;<br />
<br />
/////////////////////////////////////////////////////////////////////////////<br />
// CCmnCtrl1App initialization<br />
<br />
BOOL CCmnCtrl1App::InitInstance()<br />
{<br />
	AfxEnableControlContainer();<br />
<br />
	// Standard initialization<br />
<br />
	CAllControlsSheet   allcontrolssheet(_T("Common Controls Sample"));<br />
	allcontrolssheet.ModifyStyleEx(0, WS_EX_LAYOUTRTL);<br />
	allcontrolssheet.m_psh.dwFlags |= PSH_RTLREADING ;<br />
	m_pMainWnd = &allcontrolssheet;<br />
	m_pMainWnd->ModifyStyleEx(0, WS_EX_LAYOUTRTL);<br />
	allcontrolssheet.DoModal();<br />
	return FALSE;<br />
}<br />
<br />

Re: How to set RTL layout for a CPropertySheet.

Stuart Dootson9-Jan-09 22:30

Stuart Dootson

9-Jan-09 22:30

Looking at this page[^], I think you need to set WS_EX_LAYOUTRTL in the resource file for each property page (as each property page is a dialog), rather than directly on the property sheet?

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.