|
|
I cna't comment on the technicalities of why it might be failing, but I can suggest a workaround:
TeraCopy[^]
A gem of a utility IMHO
|
|
|
|
|
Delayed write errors simply mean write errors that occurred when the system tried to write back from cache to the disk. The system caches writes in order to consolidate them, to maximise writing performance, and to support fast reads back from recently-written locations.
The problem is with the disk hardware, not the OS.
"Multithreading is just one damn thing after, before, or simultaneous with another." - Andrei Alexandrescu
|
|
|
|
|
Normally I would agree with you - but I have tried it on multiple hard disks, XP chokes on all of them.
I have run full diagnostics on the disks, and there are no problems with them. SMART thinks they have no issues, as well. This is something intrinsic to XP, not the drives.
Silver member by constant and unflinching longevity.
|
|
|
|
|
This is something specific to your machine/Windows installation. I've written some tests creating and copying 80GB files between drives without any issues.
|
|
|
|
|
I could see that, but they are plain vanilla XP Pro SP2 installs. One on a Dell, and one on a ThinkPad.
Both act the same. Win 2K3 does not.
Silver member by constant and unflinching longevity.
|
|
|
|
|
Do you have some anti-virus/anti-spyware software or some disk management tools, like Diskeeper, installed on these machines?
|
|
|
|
|
Dave,
Thank you.
Stupid me, of course if there is an apparent OS issue, I should have checked at least anti virus first. I must not be thinking straight to have missed checking that. 
I have SmartDefrag running on both the XP machines, but not the 2k3 machine, and symantec endpoint on the thinkpad. I'll turn all them off and try again.
Richard
Silver member by constant and unflinching longevity.
|
|
|
|
|
When I start an application (details below) from a mapped network drive (e.x. "Z:\software\myapplication.exe") and while working with said application the network connection is disrupted (e.x. because I pull my network cable) then after some random amount of time my application will "vanish" - no error messages, no log entries, no nothing, simply gone. Why that?!?
The application is a pretty normal MFC based application made with VC++ 2003 using a couple of DLLs (MFC redistributables stuff and stuff you need to integrate a simplistic Subversion client into it) with everything being in the very same director ("Z:\software\myapplication.exe", "Z:\software\mfc71.dll", "Z:\software\intl3_svn.dll", etc.). The network drive itself is hosted on a Samba server and I am using a fully updated WindowsXP.
|
|
|
|
|
Are there any DLLs in the startup directory, or does it store any temp files there?
Silver member by constant and unflinching longevity.
|
|
|
|
|
In the network directory...
S:\Creator
...are the following files:
-- my application --
Creator.exe
-- DLLs needed by MFC --
mfc71.dll
msvcp71.dll
msvcr71.dll
-- DLLs needed by integrated Subversion client --
intl3_svn.dll
libapr.dll
libapriconv.dll
libaprutil.dll
libdb44.dll
libeay32.dll
ssleay32.dll
-- files being read by my application during startup, but not again later --
CreatorEditRights.dat
symbols.bmp
symbolsme.bmp
On my (local) desktop I do have a shortcut icon pointing to...
S:\Creator\Creator.exe
...whereas the working directory is...
S:\Creator
The project data itself loaded during startup of my application
are all residing in a directory on my local harddisc C:
Please note: the "DLLs needed by MFC" are of course not necessary
on my development machine but I put them there since all the users
of my application don't necessarily have the MFC 7.1 redistributables
installed. I wanted to keep it simple alias no installation required
so I put the necessary DLLs right next to my application. This itself
works perfectly on all the Windows XP machines here in the office.
At least as long the network directory is accessible all the time...
|
|
|
|
|
T.T.H. wrote: This itself works perfectly on all the Windows XP machines here in the office.
At least as long the network directory is accessible all the time...
Exactly.
I suspect it dies when it is trying to load another dll from the local directory, either originally, or when it swaps in and out.
If this is in c++, I would put a try catch around the event loop, and show message with what ever is coming back. I suspect it is an uncaught exception when a dll fails to load. Or possibly another part of the app?
I'm assuming you have the source, otherwise, you are going to have to create a simple install.
Either that, or be willing to take the hit when the network goes down. I suspect that there will be so many
other screams that this one will just raise the noise level slightly.
RM
Silver member by constant and unflinching longevity.
|
|
|
|
|
I do have the source code (it's "my" application after all) and there already is a big try/catch block around the Run() function:
int CCreatorApp::Run()<br />
{<br />
try {<br />
ReturnValue = CWinApp::Run();<br />
}<br />
((( lot of different catches here, including catch(...) )))
Unfortunately it never triggers (in the case where the network is gone). In addition when there would be an unhandled exception my operation system should tell me "hey, there had been an unhandled exception" (that default message box) - which does not trigger, too.
The problem being caused by trying to load a DLL sounds reasonable - but a) how can I find out that this is actually the cause (does Windows have any log files for such events?) and b) how to prevent it (e.x. preloading all DDLs) ?
Regarding local installations: the huuuge advantage of the "exe in network share" solution is the fact that I can update the application (which happens quite often, like once every week) and everybody is instantly working with the new version. Users are lazy and the last thing I need is them whining over bugs which would not have happened with the most current version of the application.
The whole thing ran fine the last three years, with a random, at that point unexplainable crash every half year or so, but since our network router has a hickup and the networking going occasionally away it's really became an annoyance, with "loss of work" and all such nasty things.
P.S.: thanks for your help, is really appreciated!
|
|
|
|
|
There are two sides to the dll problem - YOUR dlls, and 'system' dlls.
Your dlls are part of your app, they are compiled from code you write, and that you could change.
System DLLs are like the MFC DLLs, that will not change unless you change your development environment.
Move the system dlls to the local systems, so they are always available. Keep your dlls & executable on the network, but, like you said, force load them.
It's been years since I've done VC++/non- managed, so I don't remember any system calls for loading DLLs.
Top of my head, put a 'known' method in each of the dlls (like 'void LoadGrahicsDLL();' in graphics.dll). Spin off a thread that calls each of them after a minute or so, so it is not directly affecting your load time. I know there are also ways to force the dll to load by name. This link may help, and there are other CodeProject DLL loading articles as well.
Delayed DLL Loading[^]
I have not looked at this in detail, but it is C++, not sure if managed or not.
Another thing you could do is to make a directory in temp or even 'program files', and copy any dlls there when you load, and than force load the dlls from there. In affect, installing on the fly.
I guess you could even take this to the extreme, and have a small program that is the one the users think they are loading that makes sure the local copy is correct and starts the real (local) program. You just have to figure out a way to keep them from figuring out that is the real app and running it directly.
This leads to all kinds of testing scenarios to determine what would die, and at what stage it would.
All of this to say that no, now I'm not sure how to catch the exception, or if there even is an exception available to catch.
I remember that we used to have a similar problem with a local net deployed app (during testing), and just wrote it off as a cost of having network deployment. I don't recall that we did or did not get a log entry. We just told the test team that of course it would die if the exe came across the network, and they pulled the network cable out. 
Silver member by constant and unflinching longevity.
|
|
|
|
|
Windows is a demand-paged operating system. It only reads pages from executables as they are referenced. If the OS has lost contact with the file system that the executable came from, when a new page that hasn't been used before (or was discarded because it hadn't been used recently) is referenced, an error may occur. If it does, Windows cannot continue executing the process and so kills it.
There are linker flags which you can use to tell the linker to mark the executable so that the OS reads the whole file into the swap file before beginning execution. Use /SWAPRUN:NET to mark for network execution and /SWAPRUN:CD to mark for removable disks such as CD-ROM. You can use editbin to mark the executable after linking.
"Multithreading is just one damn thing after, before, or simultaneous with another." - Andrei Alexandrescu
|
|
|
|
|
After quite some time I finally tried out your suggestion today and it seems to solve my problem.
Thank you so much!
|
|
|
|
|
I have someone with a laptop, with a partitioned HDD. The main partition is now full, but there is space available on the other one. Is there a tool I can use to combine the two, without formatting, on XP?
|
|
|
|
|
Many resize tools to choose from such as Symantec's Partition Magic, Paragon's Hard Disk Manager, and many others from this Google Query[^].
(caution to back up first just in case or corruption etc...)
modified 1-Aug-19 21:02pm.
|
|
|
|
|
I have a situation where I may need to set up email accounts for different users on shared machines. Am I correct in assuming that the Email Account settings in Outlook are specific to the logged on user? I don't want one user doing a send and receive and Outlook doing it for all accounts, only for that user's account.
|
|
|
|
|
Brady Kelly wrote: Am I correct in assuming that the Email Account settings in Outlook are specific to the logged on user?
Yes, they are user-specific.
|
|
|
|
|
In device manger, hardware update wizard is not found.I am using windows xp.
Can an body tell me how to enable this wizard
Thanks in advance
With regards
Deepu
|
|
|
|
|
Hi,
I want to create a batch file that should run 3 different .exe that are placed in a single folder and the location of the folder could be anywhere in the system. Is there a command in batch file that allows me to run the .exe from their current location? Please help
Cheers!
Ethen
|
|
|
|
|
If my memory serves me correctly, you will need to set up search paths and to do this you will need to execute the SET PATH command to set these up for example :
SET PATH=C:\;C:\WINDOWS;D:\MYSTUFF\PROGS
Then when you attempt to execute an executable program, the operating system will search the paths set in order, until the program is found or all paths have been checked.
Steve Jowett
-------------------------
Real programmers don't comment their code. If it was hard to write, it should be hard to read.
|
|
|
|
|
|
hi everyone,
I ve a requirement of a project to develop on RTOS (Real Time Operating System).
So, i want to know which FREE RTOS should be chosen for project that does serial port communication?
How does it work?
And the main Question : which are the languages that are supported for such application development?
Any answer or hint will be appreciated....
Regards,
-SIFAR.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
,
It wouldnt be long before someone ran cmd.exe and as a parameter they could have the "format" command and erase that computer's drive 
Or if someone was really awkward they could set the ScreenSaverTimeout string to 1 second and have the "shutdown" command in the SCRNSAVER.EXE therfore shutting it down as soon as it is turned on.