|
The proxy is telling you that the LocalService account is not authorized to use the proxy. You have to supply the proxy with credentials, specifying an account that DOES have access to use the proxy.
|
|
|
|
|
Hi - I have a VB.Net app that controls several devices - including a servo on a USB/Com port using a VCP - I am adding another device with another USB/Comport VCP driver and my vb.et program will not send the write buffer contents to the port, but does not throw an error but hangs on the next read.
I have tested the interface and device (a USBI/O24R board) using hyperterminal and the device and ports work fine.
Lots of time searching for a similar problem - no joy - so here are a few questions.
Is there a limit on how many USB/Serial (virtual COm Port) emulators in a system. Is there a problem with high com munbers (I started at 17) - but I should point out that I move the USB/Serial port to com2 with the same results.
Is there a problem with the USBI/O24R driver ? I have had a few emails with the chip supplier but no help yet except try getting to a lower com port - no results.
Below is an extract of my test code . . .
I added the GetSerialPortNames to see what was happening - POrtmon shows tthe name of the port and the open/close and a single write of "0A" but none of the data string. No change when the VCP was forced to Com2
Thanks for the help
Bob
__________________________________________
Public SwitchCommName As String = "COM2"
Public SwitchCommSpeed As Integer = 9600
Public SwitchCommParity As System.IO.Ports.Parity = IO.Ports.Parity.None
Public SwitchCommDataBits As Integer = 8
Public SwitchCommStopBits As System.IO.Ports.StopBits = IO.Ports.StopBits.One
Public SwitchComDataOut As String
Public SwitchCommFlowControl As System.IO.Ports.Handshake = IO.Ports.Handshake.None
Dim SwitchCom As SerialPort = My.Computer.Ports.OpenSerialPort(SwitchCommName, SwitchCommSpeed, IO.Ports.Parity.None, SwitchCommDataBits, IO.Ports.StopBits.One)
Public SwitchCommdataOut As String
Public SwitchCommDataIn As String
Public Switch_WordOK As Boolean = False
Sub InitializeRemoteSwitch()
Call GetSerialPortNames()
MsgBox("OK")
SwitchCom.DiscardInBuffer()
'ID device First
SwitchCommdataOut = "?TTTTTTT" '& vbCrLf
SwitchCom.WriteLine(SwitchComDataOut)
Try
SwitchCommDataIn = SwitchCom.ReadLine()
MsgBox(SwitchCommDataIn)
Catch ex As Exception
End Try
'Set I/02 as Input (switch), I/04 as output (Red) and I/06 as Output (Green)
'Default is input
'Values = 2 , 8 and 32 so output total is 40
Dim SwitchCommOutputSelect As Integer = 40
Dim SwitchCommBothLightsOn As Integer = 40
Dim SwitchCommGreenLightOn As Integer = 32
Dim SwitchCommRedLightOn As Integer = 8
Dim IOValA As String = System.Convert.ToChar(SwitchCommOutputSelect)
SwitchCommdataOut = "!A" & IOValA
SwitchCom.WriteLine(SwitchComDataOut)
'Set both lights on
SwitchCommdataOut = "A" & System.Convert.ToChar(SwitchCommBothLightsOn)
SwitchCom.WriteLine(SwitchComDataOut)
MsgBox("Both Lights")
'Set red light on
SwitchCommdataOut = "A" & System.Convert.ToChar(SwitchCommBothLightsOn)
SwitchCom.WriteLine(SwitchComDataOut)
MsgBox("Red Light")
'Set Green light on
SwitchCommdataOut = "A" & System.Convert.ToChar(SwitchCommBothLightsOn)
SwitchCom.WriteLine(SwitchComDataOut)
MsgBox("Green Light")
Dim I As Integer
For I = 1 To 10
'Get Switch Data
SwitchCommdataOut = "a"
SwitchCom.WriteLine(SwitchComDataOut)
Try
SwitchCommDataIn = SwitchCom.ReadLine()
MsgBox(SwitchCommDataIn)
Catch ex As Exception
End Try
Next
End Sub
Sub GetSerialPortNames()
' Show all available COM ports.
For Each sp As String In My.Computer.Ports.SerialPortNames
ListBox1.Items.Add(sp)
Next
End Sub
|
|
|
|
|
Hi all,
Any help with this one very much appreciated (I've spent weeks on it (on and off) and it is driving me mad...)
I have a need to retrieve and set the raw values of a joystick (not the calibrated values returned normally). The code is written in VB.NET and uses DirectInput.
My code works at present but returns calibrated data (so a range of 0 - 65535). A snippet of the code below:
My question is: How can I retrieve (and set) the raw data values returned by each axis?
My reading did point me at IDirectInputDevice8::SetProperty, and to use the DIPROP_CALIBRATIONMODE parameter - but I can't work out how to do this in vb.net.
(In case anyone is wondering why I would not use the control panel to calibrate a joystick - I need this code as the program will manually 'calibrate' the pots out of a joystick on a DIY motion platform simulator we are building - and we wish to use joystick pots as the feedback mechanism).
Again - thanks in advance to anyone that can help.
Dim devices As Microsoft.DirectX.DirectInput.DeviceList
Dim device As Microsoft.DirectX.DirectInput.DeviceInstance
Dim Joystick As Microsoft.DirectX.DirectInput.Device
Dim JState As Microsoft.DirectX.DirectInput.JoystickState
'Get all the devices of type joystick
devices = Microsoft.DirectX.DirectInput.Manager.GetDevices(DeviceType.Joystick, EnumDevicesFlags.AllDevices)
'Do we have at least one Joystick?
[...]
devices = Microsoft.DirectX.DirectInput.Manager.GetDevices(DeviceType.Joystick, EnumDevicesFlags.AllDevices)
[...]
'Move to the first
devices.MoveNext()
'Now get the first device.
device = devices.Current
'Now get joystick handle to the device
Joystick = New Microsoft.DirectX.DirectInput.Device(device.InstanceGuid)
'Tell the joystick to behave itself as we want it to.
Joystick.SetCooperativeLevel(Me, CooperativeLevelFlags.Background + CooperativeLevelFlags.NonExclusive)
Joystick.Acquire()
Joystick.Poll()
JState = Joystick.CurrentJoystickState
Joystick.Poll()
JState = Joystick.CurrentJoystickState
TBJoyX.Value = JState.X
TBJoyY.Value = JState.Y
|
|
|
|
|
For others, in case this is useful in future, I didn't need to calibrate the joystick (or get to its underlying RAW values). The reason is that I discovered that 'modern' USB joysticks auto-calibrate...
|
|
|
|
|
I've been trying to deal  with bitmaps in DPX format (a motion picture format). After ages of trial and error I stumbled upon some information in the help files that GDI+ would only  support several standard formats (like JPG, BMP etc.). Still being a newbie I assume now that all of the useful image classes obviously don't work with a dpx-file...  and I'm close to giving up the idea of direct pixel access through VB.
Can one of you experts in here tell me if my assumption is true or if there are other ways to open (and work on) an image file which is not in a mainstream format?
Thanks
Michael
|
|
|
|
|
Michael Schäuble wrote: GDI+ would only support several standard formats (like JPG, BMP etc.). Still being a newbie I assume now that all of the useful image classes obviously don't work with a dpx-file...
True! You have to either find a library that does support the format, or create your own.
Michael Schäuble wrote: and I'm close to giving up the idea of direct pixel access through VB.
Yep! No direct pixel access is possible, with any speed anyway, because VB.NET still doesn't support pointers. You can use C# to create a library that does this for your VB.NET app though.
modified on Monday, September 29, 2008 8:10 PM
|
|
|
|
|
Too sad, but thanks for making it clear. Unfortunately I'm not experienced enough to write my own libraries and not a professional programmer, anyway.
What do you think about involving third party solutions like GraphicsMagick (open source) for the graphics part? Like generating command-line strings and calling gm for the transformation? Or would that be too clumsy....
|
|
|
|
|
Using command line utilities will be very clumsy. Find a library that does this natively, either COM or .NET-based.
|
|
|
|
|
Is possible to create an XmlDataSource that has 50 columns merge an sql database with 14 columns into and force the other 36 columns except and false or any value I want with vb.net
Learning to Code
|
|
|
|
|
Mo John wrote: Is possible to create an XmlDataSource that has 50 columns
Sure. Why would you want to? XML is NOT a database despite every newbie's attempt at making it behave like one.
Mo John wrote: merge an sql database with 14 columns into and force the other 36 columns except and false or any value I want
Uhh... what?
|
|
|
|
|
While I'm sure I could easily work out something to do this, I was wondering if there was a function that would add an array of bytes to the end of an existing byte array.
Specifically, I am working on a project where a method takes a byte array as a parameter, where the byte array contains more than just a converted string.
Original C/C++ sample code:
unsigned char buf[10];
int len = 10;
buf[0] = 9;
buf[1] = 76;
sprintf((char*)&buf[2], "%d", groupnum);
I'm sure the answer is obvious, but it's just not hitting me in the face right at the moment.
(For those interested, this is an example from Avaya's "IP Office TAPI Link Developer's Guide" to build the parameter block for the lineDevSpecific function of TAPI 2.x. I'm working on the project in VB.NET using JulMar's ATAPI.NET wrapper. I'm having another issue with the function call to use the byte array, but that's another matter entirely.)
|
|
|
|
|
I have no idea what you're getting at,but you may want to look into the System.Text.StringBuilder class.
|
|
|
|
|
Use the Array.Copy or Array.CopyTo method to copy the data from one array into another array.
Use the Encoding.GetBytes method to encode a string into a byte array. Example:
byte[] group = Encoding.UTF8.GetBytes(groupNumber.ToString());
Despite everything, the person most likely to be fooling you next is yourself.
|
|
|
|
|
Array.CopyTo is exactly what I was looking for. 
|
|
|
|
|
I'm running a VB6 application that queries an SQL Server 2000 database. I'm facing a weired behavior: sometimes the application get toooo slow while executing a specific query, while the same query executes very fast from SQL Query analyzer. I'm not able to catch when it's becoming too slow.
this application has tooo many users connected in the same time but not all are executing the same command at the same time. the table subject of query has many indexes. the log file of the database is small. this is weired since no one can tell when it executes normally from the application and when it becomes too slow
is there any clue where and what to look for in order to solve this?
thanks 
|
|
|
|
|
i would imagine that one of the tables is getting locked (see http://www.mssqlcity.com/Articles/General/sql2000_locking.htm for locking info) If you are entering data then the SQL Server will lock the row or maybe the table to stop other people changing it will your are to keep integerity.
You can get around it for your query by using the nolock feature
SELECT * FROM TableA WITH (nolock) INNER JOIN TableB WITH (nolock) etc.
Otherwise can you provide more info on what the app does etc
Regards
AKimba 
|
|
|
|
|
I think that akimba is right that a dead lock\delay lock might be occurring. I don't think changing the nolock locking hint will work though since that is the default hint for select statements.
Generally to avoid deadlocks, the tables should be used in the same order when doing updates/deletes/inserts. It's a major pain to come up with this list and stick to it, but by referencing the tables in the same order deadlocks shouldn't occur. Another option possibility might be that you have stored procedures that are using a looping structure to perform table modifications which would also cause blocking to occur).
IE, this could be happening especially if there is a large amount of users doing updates, etc.
Stored Procedure 1:
--update table 1
--update table 2
Stored procedure 2:
--update table 2
--update table 1
Might have to narrow down the places where the locking is occuring and modify just those (bandaid approach) vs. changing everywhere the updates are being used.
--Edit:
Starting recording performance data on the server(s) where the delays are occurring. Should narrow down the table(s) that are problematic. Also may need to review indexes.
Just throwing out ideas.
Any suggestions, ideas, or 'constructive criticism' are always welcome.
|
|
|
|
|
Hello,
is anybody can give me merge modules for crytal reports in VB.net 2005.
|
|
|
|
|
Nope. If you're entitled to have them with your licensed copy if Visual Studio, then you have them on the installation CD/DVD's. If not, you don't have them and noone here is going to risk their money and license giving you stuff you're not supposed to have.
|
|
|
|
|
Hi,
I am having awful trouble trying to use the IMAPI2. All I am trying to do is do display the media in a drive per drive letter and also trying to read an ISO. If anyone can help it would be great.
Thanks
|
|
|
|
|
Hi all,
I an using crystal reports to show the reports.I want to use the pull method in crystal reportie connecting the query and connection string in run time..
how can i paass the database connection string to report??
Dim frpt As New rptformula
Dim rpt As New rptstudent
rpt.SetDatabaseLogon("sa", "nimda")---(here iam passing the login and pwd to login into the tables connected to reports but I want togive the connection string in runtime in pull method)
CrystalReportViewer1.ReportSource = rpt
,i saw database properrty in crytal reports how to use that property
|
|
|
|
|
IIRC you need to give each table in the report the credentials.
For each Table in Report.Datatables
Table.creds = ???
next
Never underestimate the power of human stupidity
RAH
|
|
|
|
|
Hello all,
I want to add a row in datagridview at zeroth index.
its not difficult.... i know
but this new row should have all cells as checkbox. and datagridview is databound.
so, my grid will have checkbox row at first line and rest of the line as textboxcells...
is there any way to do it?
Thanx !
|
|
|
|
|
Hello,
this does not seem be possible. Conversion of boolean values to different datatypes may throw some
errors while inserting values.
Regards,
Allen
Allen Smith
ComponentOne LLC
www.componentone.com
|
|
|
|
|
Need urgent help, Please reply ASAP.
We are working on a VB 6.0 to VB.Net migration project which is using lots of different third party controls for e.g. “Crescent enhanced edit controls” which is provided by the vendor Crescent Quickpack.
In a VB 6.0 code file we have a third party control as “CSTextLibCtl.sitxEdit” which exposes following properties.
Begin CSTextLibCtl.sitxEdit csParticulars
Height = 375
Left = 2280
TabIndex = 4
Top = 240
Width = 1455
_Version = 262145
_ExtentX = 2566
_ExtentY = 661
_StockProps = 125
ForeColor = -2147483640
BackColor = -2147483643
BeginProperty Font {0BE35203-8F91-11CE-9DE3-00AA004BB851}
Name = "MS Sans Serif"
Size = 8.24
Charset = 0
Weight = 400
Underline = 0 'False
Italic = 0 'False
Strikethrough = 0 'False
EndProperty
Modified = -1 'True
HideSelection = -1 'True
RawData = ""
Text = ""
StartText.x = 2
StartText.y = 6
FirstVisPos = 0
HiAnchor = 0
HiNew = 0
CaretHeight = 13
CurNumDataChars = 0
MaxDataChars = 0
FirstDataPos = 0
CurPos = 0
MaxLen = 0
DataReadOnly = 0 'False
Mask = ""
CharacterTable = ""
End
However when we migrate the form containing this control to VB.Net using migration tool “ArtinSoft” it migrates the code as shown below.
Public WithEvents csParticulars As AxCSTextLib.AxsitxEdit
.
.
Me.csParticulars = New AxCSTextLib.AxsitxEdit
.
.
.
CType(Me.csParticulars,
.
.
System.ComponentModel.ISupportInitialize).BeginInit()
'
'csParticulars
'
Me.csParticulars.Location = New System.Drawing.Point(152, 16)
Me.csParticulars.Name = "csParticulars"
Me.csParticulars.OcxState = CType(resources.GetObject("csParticulars.OcxState"), System.Windows.Forms.AxHost.State)
Me.csParticulars.Size = New System.Drawing.Size(97, 25)
Me.csParticulars.TabIndex = 4
Me.Controls.Add(Me.csParticulars)
.
.
.
CType(Me.csParticulars, System.ComponentModel.ISupportInitialize).EndInit()
(the above code is present in designer form)
As can be seen from the above code snippet out of approximately 30 properties only 4 properties are mapped in VB.Net and rest all are embedded in “OcxState” object.
We wanted to have a one is to one mapping of Third party control properties to VB.Net Custom control (which we have developed) properties. However since no properties are visible in the migrated code we are not able to do the mapping. We even tried to decode the “OcxState” object that is present in the “Resx” file in the Base64 format. However that also didn’t work. Now we are stuck up at this point where untill we have this mapping we wont be able to replace the Third party controls with the VB.Net Custom controls.
We would appriciate any inputs on how to capture third party control properties and their values in the migrated code so that we can establish the required mapping.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
