|
Most likely you're using a HANDLE that was previously closed during the cleanup process. Usually, in debug mode you just can jump right into the offending piece of code and figure out which call is causing the exception. If for some reason this is not available to you, I'd suggest you try the following: After closing a handle, set it to NULL; then, before attempting any operation on a given handle, check for it not to be NULL: if it is, then you've spotted an error.
Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
|
|
|
|
|
Okay. Thanks everyone. I know the problem and has implemented a working solution.
Joaquín M López Muñoz was right on the right track about the threads closing simultaneously. I did in fact set all threads to INVALID_HANDLE_VALUE and checked them all using WaitForSingleObject().
The problem has to do with collapsing all sockets and threads as the user cancels a process. A solution I now use is to close each socket which means all their worker threads after their threads ends and sends a messages to main frame for closing. In other words, instead of stepping through all sockets in the linked list and closing them and their worker threads, now the program waits for them to end since I am using a boolean variable to indicate cancelation. This solution works flawlessly.
Kuphryn
|
|
|
|
|
what's the difference between:
1. MBCS (Multi Byte Character Set)
2. DBCS (Double Byte Character Set - it's a subset of MBCS right?)
3. Unicode (I though Unicode IS DBCS)
any idea?
Unicode compatible API all starts with "_w"?
example:
_wXXXX(..)
thanx!
norm
|
|
|
|
|
MBCS will have either one or two bytes represent a character. When you are dealing with a MBCS you will want to be careful to use the mbc version of the c runtime functions in order to perform string operations like strlen and strncpy because you are not copying a specific number of bytes rather than characters.
DBCS uses two bytes to represent each character. That simple.
UNICODE is a DBCS, but IBM uses that term all over the place, when they refer to MBCS as well. Therefore when Microsoft refers to UNICODE as a type of character set, they use Wide Character Set (WCS).
I hope that clears things up.
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
thanx, loud and clear, just one last thing:
Unicode compatible API all (or most) starts with "_w"?
example:
_wXXXX(..)
norm
|
|
|
|
|
You're a bit off with your MBCS and DBCS definitions. An MBCS uses variable numbers of bytes per character. Some will have one, some two, some three, etc. A DBCS (double-byte char set) is an MBCS with a max character length of 2 bytes.
Unicode is technically not an MBCS because all characters are the same length, 2 bytes. It is a wide character set.
--Mike--
Just released - RightClick-Encrypt v1.4 - Adds fast & easy file encryption to Explorer
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
can someone please tell me
how to add external dependencies folder to the project?
and How to add .h files to that external dependencies folder?
thanks
|
|
|
|
|
The Visual Studio IDE will automatically do that for you in your project if it detects these other dependencies.
That folder is really just there for your reference. If you are going to add files to your project I would suggest you do it through the source files, or add the files that you want to compile in the "source Files" folder.
Build a man a fire, and he will be warm for a day
Light a man on fire, and he will be warm for the rest of his life!
|
|
|
|
|
No.. external dependencies folder didn't get created..
would it be becase of win32 console application w/o MFC support???
I understand.. but i cannot include in my program.. even i include it i got error. saying
error LNK2001: unresolved external symbol _functionName_
so i was thinking may be it needs external dependencies folder.. which might be wrong.
|
|
|
|
|
I think it may only get created after the first successful build where a non-project include file is used - I've just tried the project type you've got (console app, no MFC) and that's the behaviour I saw...
Stuart Dootson
'Java, Basic, who cares - it's all a bunch of tree-hugging hippy cr*p'
|
|
|
|
|
as far as i have been able to tell, 'external dependencies' is a visual studio managed folder that lists all files included manually (via #include) that have not explicitly been added into the .h files.
try #including a header file not already in the project and rebuilding - it should then appear in the ext dep folder
|
|
|
|
|
Is there a way to accomplish this?
I get an error the way it is now
error C2440: 'initializing' : cannot convert from 'const int' to 'int *'
Conversion from integral type to pointer type requires reinterpret_cast, C-style cast or function-style cast
int counts[] doesn't work either
warning C4200: nonstandard extension used : zero-sized array in struct/union
error C2233: '<unknown>' : arrays of objects containing zero-size arrays are illegal
typedef struct
{
int id;
int numCounts;
int *counts;
} Counts;
Counts counts[] =
{
{1, 0, 0},
{2, 10, {100, 101, 102, 103, 104, 105, 106, 107, 108, 109}},
{3, 0, 0},
{4, 0, 0},
{5, 8, {209, 208, 207, 206, 205, 204, 203, 202}},
{6, 5, {300, 301, 302, 303, 304}},
};
int numCounts = sizeof(counts) / sizeof(Counts);
void main()
{
return;
}
Todd Smith
|
|
|
|
|
You can't initialize pointer as an array like this:
int *a;
a = {10,20,30};
You can use only type identifier[] = { /*...*/ }
Pointers should be initialized like this:
int *a;
a = new int[10];
a[0] = 15;
a[]1 = 16;
I suggest you to create a more complex type.
Ñ There is only one MP Ð
|
|
|
|
|
This worked
typedef struct
{
int id;
int numCounts;
int *counts;
} Counts;
int items1[] = {100, 101, 102, 103, 104, 105, 106, 107, 108, 109};
int items2[] = {209, 208, 207, 206, 205, 204, 203, 202};
int items3[] = {300, 301, 302, 303, 304};
Counts counts[] =
{
{1, 0, 0},
{2, 10, items1},
{3, 0, 0},
{4, 0, 0},
{5, 8, items2},
{6, 5, items3},
};
void main()
{
return;
}
Todd Smith
|
|
|
|
|
No! This code doesn't work well! It compiles with no errors, but int *counts; is still just a pointer and it can points only at the *first* element in an array!
Example:
int items1[] = {100, 101, 102, 103, 104, 105, 106, 107, 108, 109};
int* p = items1
in debugger:
Name: value: type:
p 0x0054H1 int*
|- 100 int
You can get access to the second element in an array like this: p++, but if you want to get access to the 11th element, you will get Access Violation and your program will crash!
Ñ There is only one MP Ð
|
|
|
|
|
Maciej Pirog wrote:
You can get access to the second element in an array like this: p++, but if you want to get access to the 11th element, you will get Access Violation and your program will crash!
These are the ways of C++ Arrays. They *ARE* just pointer to some memory.
Maybe the STL std::vector is what you want?
|
|
|
|
|
jhwurmbach wrote:
Maybe the STL std::vector is what you want?
That's what I called "more complex type". 
Ñ There is only one MP Ð
|
|
|
|
|
I am opening and compiling some old code in Visual Studio .NET
I've run into a compiling problem..
BEGIN_MESSAGE_MAP(CChildView,CWnd )
ON_WM_PAINT()
ON_WM_CREATE()
ON_WM_ERASEBKGND()
ON_WM_SIZE()
ON_MESSAGE(WM_FLIPWINDOW, OnFlipWindow)
END_MESSAGE_MAP()
tells me:
error C2440: 'static_cast' : cannot convert from 'void (__thiscall CChildView::* )(void)' to 'LRESULT (__thiscall CWnd::* )(WPARAM,LPARAM)'
whats happening here?
the Member Function is:
void CChildView::OnFlipWindow()
Ryan Baillargeon
Software Specialist
Fuel Cell Technologies Inc.
|
|
|
|
|
MFC7 (in VS .NET) uses stricter type checking with message map macros. It looks like you need to replace the return from ‘void’ to ‘LRESULT’. Also make sure you supply the correct function parameters, such as (WPARAM, LPARAM) etc.
More on this here [click on Microsoft Foundation Class (MFC) link]
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vcedit/html/vcrefWhatsNewLibrariesVisualC70.asp[^]
Static Casting and MFC Message Maps Beginning with Visual C++ .NET, MFC provides stricter type checking for return and parameter types of message handler functions. This new behavior notifies the developer of potential problems by flagging potentially unsafe message handlers with an error message. MFC now uses static casts for ON_MESSAGE, ON_REGISTERED_MESSAGE, ON_THREAD_MESSAGE, and ON_REGISTERED_THREAD_MESSAGE.
For example, in the past a developer could use a member function that returned void instead of LRESULT for ON_MESSAGE or ON_REGISTERED_MESSAGE and compile without any errors. With Visual C++ .NET, the potential miscast is caught and flagged as an error. The developer can fix the potential problem by replacing the return type (with LRESULT) and recompiling.
Hope this helps.
// Fazlul
Get RadVC today! Play RAD in VC++
http://www.capitolsoft.com
|
|
|
|
|
FYI, this feature alleviates the #1 programmer bug in MFC code.
-Nick
This posting is provided “AS IS” with no warranties, and confers no rights. You assume all risk for your use. © 2001 Microsoft Corporation. All rights reserved.
|
|
|
|
|
Look at what the error is telling you. The compiler is expecting a function that takes two params, but you're giving it a function that takes no params. The return type is also wrong. Add the two standard message params (WPARAM and LPARAM) and correct the return value.
--Mike--
Just released - RightClick-Encrypt v1.4 - Adds fast & easy file encryption to Explorer
My really out-of-date homepage
Sonork-100.19012 Acid_Helm
|
|
|
|
|
When you add a derived CView class to your MFC project how do I relate My View derived Class to my CDocument derived class.
I´m trying to add another view to my MFC project.
|
|
|
|
|
You do it in the InitInstance method of your CWinApp derived application class.
You will find there something like this:
CMultiDocTemplate* pDocTemplate;
pDocTemplate = new CMultiDocTemplate(
IDR_TESTDFTYPE,
RUNTIME_CLASS(CTestdfsdDoc),
RUNTIME_CLASS(CChildFrame), // custom MDI child frame
RUNTIME_CLASS(CTestdfsdView));
AddDocTemplate(pDocTemplate);
You register your new document/view pair by copy-paste-edit:
pDocTemplate = new CMultiDocTemplate(
IDR_MYTYPE,
RUNTIME_CLASS(CMyDoc),
RUNTIME_CLASS(CChildFrame), // custom MDI child frame
RUNTIME_CLASS(CMyView));
AddDocTemplate(pDocTemplate);
Don't forget to create document string in resources - see the string of existing document in string table resources for example (IDR_TESTDFTYPE in this case).
Sonork 100.15206;PavelK
|
|
|
|
|
Jose Cruz wrote:
Don't forget to create document string in resources - see the string of existing document in string table resources for example (IDR_TESTDFTYPE in this case).
First of all thank you for your help. Now do you have some explanation for the above phrase.
Every MFC document class has a corresponding definition string in string table resource - ID of the string is ID of the document (IDR_xxx), it defines parameters like name of the document for OLE, filename extension and so on.
You need one for every CDocument derived class in Your project. CDocTemplate class uses it.
It looks like:
NTGen\nNTGen\nNTGen\nNTGen Files (*.mdb)\n.mdb\nNTGen.Document\nNTGen Document
Sonork 100.15206;PavelK
|
|
|
|
|
Hello members,
i try to use the CRichEditView without doc/view architecture.
all works fine, but when i exit the app i get a fatal error.
Do anyone know about that error?
What i have maked:
-i created via app-wizard a SDI app without doc/viw
at the view i changed:
- all "things" from CWnd to CRichEditView
- and i have added macro for IMPLEMENT_DYNCREATE...
Can i use ever CRichEditView without doc/view?
Please help me, i really need help!
thanks
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
