C / C++ / MFC

gentleguy25-Jun-08 23:55

25-Jun-08 23:55

thanks for reply, for me maybe i have 400 or 700 hundrads columns,i load binary image, maybe 300x600 or evern big than this one...

i am a newbie, can give me examlpe.thanks

gentleguy

Re: how to calculate all columns amount? [modified]

Saurabh.Garg26-Jun-08 0:05

Saurabh.Garg

26-Jun-08 0:05

Can you tell us how do you declare this 2D array? I will give you a hint for static 2D array in C++.

int array[100][100];
int count[100];       // There are 100 columns.

for(int i=0 ; i<100 ; ++i)
{
    count[i] = 0;
}

for(int i=0 ; i<100 ; ++i)
{
    for(int j=0 ; j<100 ; ++j)
    {
        if(array[i][j] == 255)
        {
            count[j]++;
        }
    }
}

Hope this helps.

-Saurabh

gentleguy28-Jun-08 1:06

28-Jun-08 1:06

thanks for your help, my data is from binary image, different binary image has different dimension, when i load one 2-D binary image, depend on image size, but i can obtain width and height of image via access image definition. do you understand me? i can declare a 2-D dinamic array.thanks

unsigned char *ucImgdata1 =m_vicImg.ibuff;
 int iWidth1 = m_vicImg.endx-m_vicImg.stx+1;
 int iHeight1 = m_vicImg.endy-m_vicImg.sty+1;
 int iWidthbyte1=m_vicImg.buffwidth;
 int *nColumnCounts=new int[iWidth1];


 for (int i=0;i<iwidth1;iwidth1;i++)
 {
     nColumnCounts[i]=0;
 }
 for(int iY=0;iY<iheight;iheight1;iy++)
 {
     for(int iX=0;iX<iwidth1;iwidth1;ix++)
     {

         if (imgArray [iX+iY*iwidth1] == 255)
         {

             nColumnCounts[iX]++;

             FILE* stream;
             stream=fopen("C:\\TestArray.txt","w");
             fprintf(stream," Array=%d\n",nColumnCounts[iX]);
             fclose(stream);
         }
     }

but i couldn't get the correct result. i would like to get one array including how many amount of 255 for each column.help me,thanks.

gentleguy

modified on Sunday, June 29, 2008 4:53 AM

gentleguy28-Jun-08 23:02

28-Jun-08 23:02

thanks a lot, i still get the correct result. but my data format is a little different.

the detail is following:

unsigned char *ucImgdata1 =m_vicImg.ibuff;	
int iWidth1 = m_vicImg.endx-m_vicImg.stx+1;	
int iHeight1 = m_vicImg.endy-m_vicImg.sty+1;	
int iWidthbyte1=m_vicImg.buffwidth;	
int *nColumnCounts=new int[iWidth1];		
for (int i=0;i<iwidth1;i++)
{	nColumnCounts[i]=0;	
}	
for(int iY=0;iY<iheight1;iy++)
{	
for(int iX=0;iX<iwidth1;ix++)
	{						
      if (imgArray [iX+iY*iWidth1] == 255)          		
	{							
	nColumnCounts[iX]++;  								
FILE* stream;				
stream=fopen("C:\\TestArray.txt","w");				
fprintf(stream," Array=%d\n",nColumnCounts[iX]);				
fclose(stream);	
}		
}		
}

could help me? thanks

gentleguy

Iain Clarke, Warrior Programmer25-Jun-08 23:44

25-Jun-08 23:44

As has been said, just get on and count them.

Is this data coming in from a text file? Then you can use CStdioFile to read it in one line at a time, and sscanf to process the rows - and maintain a count of number-of-255-s for each column.

Is it in a 2 dimensional array already? Then use a loop, and count whether a number ==s 255 or not.

If you have absolutely no idea, and this is homework (which I suspect, and is why I'm being unhelpful), then you will learn a lot more working with your fellow students and teacher than getting us to do the work.

What is it you are struggling with?

Iain.

Plz sir... ^CPallini ^CPallini abuz drugz, plz plz help urgent.

gentleguy25-Jun-08 23:51

25-Jun-08 23:51

thanks for your reply,actually i load one image which is binary image, actually the data is 2_D array. this is about my work...not homework, i am doing projection histogram, so i need to collect each column 255 amound. i am not good in c++..learning...so if possible, pls help me. thanks a lot

gentleguy

Iain Clarke, Warrior Programmer26-Jun-08 0:17

Re: how to calculate all columns amount? [modified]

26-Jun-08 0:17

So, you have a block of bytes, and you know it is W wide, and H high.

First - images often have the width padded by 4. Check whether this is the case or not.

void Count255s (BYTE *blob, UINT W, UINT H)
{
   UINT nColumnCounts [W]; // W columns...
   UINT x,y;

   // clear counts.
   for (x = 0; x < W; x++)  nColumnCounts [x] = 0;

   for (y = 0; y < H; y++)
   {
       for (x = 0; x < W; x++)
       {
           if (blob [x + y*W] == 255)
                nColumnCounts [x] += 1;
       }
    }

    // now we have counts!
    DoSomethingwithCounts (W, nColumnCounts);
}

There's no error checking, and there are more efficient ways of doing this, but this should be fairly clear for you, I hope.

You could replace the check with:

if (*blob++ == 255)

to remove the expensive multiplication, but I'd avoid that unless you are very happy with pointers.

Did that help at all?

Iain.

Plz sir... ^CPallini ^CPallini abuz drugz, plz plz help urgent.

gentleguy26-Jun-08 1:28

26-Jun-08 1:28

thanks a lot. very helpful, how can i save each column amount? thanks, sorry ask many

by the way, why you use the third for loop? don't understnad.could you give me any explanation. thanks a lot

gentleguy

modified on Thursday, June 26, 2008 7:50 AM

Iain Clarke, Warrior Programmer26-Jun-08 2:23

26-Jun-08 2:23

1st for loop is to zero out all the counts. I put the action bit on the same line as the loops, which might have been a bad idea...

2nd and 3rd loops are going through the x,y coords of your data. If you were just looking for the grand total of 255s, you could have done it in one. But as you need to keep track of which column you're on, you need a 2D loop pair.

As for saving the column amount - however you like. If you just take my code and use it, you're in trouble. It's there to help you write your own. The answer to your question depends on your application, and how you put data into your histogram.

You could create a CArray, and pass a pointer or reference to it to the count function, then the results would be available outside the function.

Or you could have a CHistogram::InitialiseFromBitmapData function, and keep the results internally.

Or... lots more choices.

Iain.

Plz sir... ^CPallini ^CPallini abuz drugz, plz plz help urgent.

gentleguy26-Jun-08 15:23

26-Jun-08 15:23

thanks a lot. here i will explain to you something, when i calculate 255 for each column, i just can start to scan my data(2-D) from left bottom, and then up row by row,do you understand me? thanks a lot, and disturb you a lot.

gentleguy

Iain Clarke, Warrior Programmer26-Jun-08 21:46

26-Jun-08 21:46

gentleguy wrote:
do you understand me?

Not really...

The code I showed assumed that the data was row after row - I didn't assume whether I was starting with top left or bottom left - I've seen bitmap formats of both kind.

If your data is stored differently, you can change the maths inside the [ and ] to look it up differently.

Good luck,

Iain.

Plz sir... ^CPallini ^CPallini abuz drugz, plz plz help urgent.

Hamid_RT27-Jun-08 8:13

Hamid_RT

27-Jun-08 8:13

Can you use of Listctrl?

gentleguy28-Jun-08 1:07

28-Jun-08 1:07

i am not sure for this. i tried many times, still couldn't finish it. do you have any other idea, thanks

gentleguy

Sort by Date

manju#12325-Jun-08 23:05

25-Jun-08 23:05

Hi all..
I am storing some mails in XML Format...Now i want to Sort them and store in XML File by MailDate wise...
My mail dates are
///////////////////////////////
CString mailDate;
////////////////////////////
I am getting date in this format..
20080430 8:36:05
20080423 13:49:19
20080402 14:56:50
20080402 14:21:11........

How i Can Compare and Sort them...
plz give me some idea

Thanking you
manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

Rajesh R Subramanian25-Jun-08 23:09

Rajesh R Subramanian

25-Jun-08 23:09

I offered you a suggestion previously on this issue. What happened to that? Why is a date stored as a string in your program? If you have it as a COleDateTime object, you could use the COleDateTime Relational Operators[^].

Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP

manju#12325-Jun-08 23:24

25-Jun-08 23:24

Actually We are reading from the mails and storing as a "CHAR" in Structure..

<br />
typedef struct {<br />
<br />
	LONG iMBUserMailBoxSize;<br />
	LONG iMBUserMailCount;<br />
	LONG iMBUserMailSize;<br />
	LONG iMBUserMailAttachFileCount;<br />
	BOOL bMBUserMailHasAttachment;	<br />
	TCHAR cMBUserMailPath[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailFrom[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailFromEmail[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailFromName[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailBcc[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailCc[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailDate[MAX_DATE_LEN];	<br />
	TCHAR cMBUserMailSubject[MAX_PATH_LEN];<br />
	TCHAR cMBUserMailTextDesc[MAX_MAIL_SIZE];<br />
	ACL_STRUCT_MBUSERS_MAIL_ATTCH ACL_ATTACH[MAX_ATTACH_COUNT];<br />
	<br />
} ACL_STRUCT_MBUSERS_MAIL;

First we get a MailDate it is in "TCHAR"......

After that we changed it to CString to Remove "/" operator....thats it..

manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

Rajesh R Subramanian25-Jun-08 23:40

Rajesh R Subramanian

25-Jun-08 23:40

manju#123 wrote:
Actually We are reading from the mails and storing as a "CHAR" in Structure..

Don't store it as a char, store it as a COleDateTime. That's all I have to offer.

Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP

manju#12325-Jun-08 23:44

25-Jun-08 23:44

Rajesh R Subramanian wrote:
store it as a COleDateTime.

Ok i will change it COleDateTime...

Thank you

manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

manju#12325-Jun-08 23:45

25-Jun-08 23:45

Rajesh R Subramanian wrote:
store it as a COleDateTime.

Ok i will change it as COleDateTime...

Thank you for your suggestion

manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

manju#12325-Jun-08 23:47

25-Jun-08 23:47

One more thing..
If MailDate is in CString...We can Sort it or not..

thank you
manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

Rajesh R Subramanian25-Jun-08 23:58

Rajesh R Subramanian

25-Jun-08 23:58

manju#123 wrote:
If MailDate is in CString...We can Sort it or not..

If you have it as a COleDateTime object, the job would be easier for you as the relational operators are defined for that class. Doing it with a CString will be known as a "Coding horror".

Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP

manju#12326-Jun-08 0:09

displaying the integers in multiple lines in an edit box?

26-Jun-08 0:09

Thank you.
I will change Char to COleDateTime and Check it...

manju

Hi..
I am Mnaju.I have Completed my B.E Computers Science.Lokking for a job.I am interested in VC++
manju

MahaKh25-Jun-08 21:44

MahaKh

25-Jun-08 21:44

i am displying the integers in edit box by using SetDlgItemInt the output is overwritten but i want to display it in multiple lines like a sequence....plz n e budy help me out!!!!

Re: displaying the integers in multiple lines in an edit box?

Iain Clarke, Warrior Programmer25-Jun-08 21:56