|
With which technology you would like to implement AJAX. Like you want to use it with asp,asp.net or simply with html??
By the way there are very good articles available on codeproject itself which will provide you a lot of information about AJAX.
|
|
|
|
|
I rather like this one[^]. It's not AJAX-specific, but frankly raw AJAX is dead simple (and... slightly tedious) - this'll introduce you to a nice little library for working with it.
Citizen 20.1.01 'The question is,' said Humpty Dumpty, 'which is to be master - that's all.'
|
|
|
|
|
If I load a web user control in an assembly from different assembly, the controls in the user controls dont get intialized. I need to explicitily intialize them.
For instance, I create a user control(TestControl ) in assembly(AssemblyName) with label in it. And I use it in different assembly as below
]]>
<uc1:testcontrol id="Test" runat="server">
The label in the user control in the referred assembly always remains NULL. I need to add it at runtime in the control. Do i need to take care of anything else or am I missing anything.
Any help would be appreciated.
Thanks in advance.
modified on Thursday, May 8, 2008 4:44 PM
|
|
|
|
|
Hai all,
in my html page i use iframe for load a page
<iframe src="some link" width="758" height="440" frameborder="no" scrolling="no"></iframe>
while it load it shows the error message permission denied error ?
but the same page work smoothly in other machine with IE6.
thanks in advance
|
|
|
|
|
seems u don't have proper permissions to that IP...contact administrator about that....
Ashish Sehajpal
|
|
|
|
|
Cross site scripting prevention?
Does the link exist on the same host as the parent page?
James Simpson
Web Developer
imebgo@hotmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
|
|
|
|
|
Parent page is client side,url in iframe is in server side, The url execute a javascript too.
|
|
|
|
|
so, the parent page is a file of disk? and the IFRAME is a file from a webserve?
That is most likely cross site scripting security in the browser stopping you doing that
Can you request the parent page from the same webserver?
James
James Simpson
Web Developer
imebgo@hotmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
|
|
|
|
|
Thanks for kind replay...
"permission Denined" error occure in some machine not all machine.Is any related to security property of IE.
Regards
vicky
|
|
|
|
|
My guess its the Browser blocking it becuase the two pages are from different domains (eg , File System and Web Server)
as for disabling that feature, im unsure if its possible in later version of IE and mozilla, but i could be wrong..
Google, would be your best bet now you know why the problem is occuring..
James
James Simpson
Web Developer
imebgo@hotmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
|
|
|
|
|
hai all,
How to set the visibility option for the created module in DNN?
for example:if i have created a report module.. how to switch off
that report module??? can anybody help me with this issue?
Thanks!!!!!
with Regards,
Imthiyas Ahamed.A
|
|
|
|
|
I have put together a COMET implementation in .NET and Javascript.
The model uses a custom threadpool to keep things scalable, and everything on the serverside is functioning correctly... now im having a small issue..
I have tested the server on a page that does not include any assets, or very few, and now I am including some stylesheets and larger images on a style page, when the comet client kicks in it doesnt fully function until a little while after the page has loaded (say within 10 seconds)
My model uses a single XMLHTTPRequest to wait for the poll (10 seconds on the server), and if I need to send a message, I cancel the first request, send the message and then poll again. When a poll times out, it restarts again.
The problem symptoms occur when I open the page it begins to poll and then I pretty much immediatly send a message, which aborts the poll, and attempts to send the message. It now waits a little while before it completes. Once this period of "warming up" is over, it functions correctly.
Im thinking IE is holding one of its 2 sockets open after the page has loaded the resources and this is causing the delay?
Any ideas if this is fixable - or should I just work around it? the obvious workaround would be to limit sending messages until the first poll has finished?
Thanks, James
James Simpson
Web Developer
imebgo@gmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
|
|
|
|
|
I'm working on a script for my employer's website that will take form data and enter it into a MySQL database. Easy enough...until they wanted it to never have any gaps in the "id" field. They want the "id" field to be automatically generated and for it to never have any gaps in it if we decide to delete someone out of the database for whatever reason. To do this I wrote the following code (this isn't in it's entirety, just the pieces that are pertinent.)
$id = 0;<br />
$query = mysql_query("SELECT * FROM <tablename> ORDER BY id") or die(mysql_error());<br />
$row = mysql_fetch_array($query) or die(mysql_error());<br />
<br />
<br />
while( $row['id'] = ($id + 1)){<br />
$id += 1;<br />
}<br />
$id +=1;</tablename>
It looks to me that it should say "while the id field (1) = $id + 1 (1) then add 1 to $id and repeat until the id field doesn't = $id + 1 anymore." For some reason though, when I run the script from the website it just sits there until I get this error back from Firefox.
Fatal error: Maximum execution time of 30 seconds exceeded in /var/www/www.website.com/htdocs/script.php on line 33
If I take the while statement out of the code and just have it echo back the values of $row['id'] and $id + 1 it brings back 1 and 1. But if I add the while loop in there it errors out again. I've tried while, do while, and if statements all to no avail.
My apologies for the lengthiness, but I wasn't sure how to make this more concise.
|
|
|
|
|
while( $row['id'] = ($id + 1)){
don't you think that you are using ASSIGNMENT operator instead of EQUALITY COMPARISON operator i.e. = instead of ==
Ashish Sehajpal
|
|
|
|
|
Ah...wow I feel dumb. Yeah that was the problem...the script works beautifully now. I guess I skipped that chapter when I was teaching myself PHP.
Thanks!
|
|
|
|
|
Hello,
I am posting string data from C++ application, which uses activex webbrowser control, to ASP. The only way i can post this string in binary using safearray.
Anyhow, I am able to successfully read this string in ASP server and assign it to client script varible using following statement.
inputstr = "<%Response.BinaryWrite(Request.BinaryRead(Request.TotalBytes))%>"
The problem is when i have some special characters like ",\r,\n... in my string.
Is there a way to get this string to client sdie, so that i parse it and populate fields.
Thanks
|
|
|
|
|
have u tried html encoding?
Ashish Sehajpal
|
|
|
|
|
I tried Html encoding, and having same problem.
I tried with simple \n in the input string:
function DisPlayMsg()
{
var outputstr
outputstr = "<%= Server.HTMLEncode(Response.BinaryWrite(Request.BinaryRead(Request.TotalBytes))) %>"
alert(outputstr)
}
And after server process:
function DisPlayMsg()
{
var outputstr
outputstr = "abcd
efgh"
alert(outputstr)
}
Ann obviously it is erroring out.
|
|
|
|
|
Ok, the Server is VBScript and the ClientSide is javascript
so, you need to replace Chr(13) with "\r" and Chr(10) with "\n" VB wonnt encode these characters
Giving you:
function DisPlayMsg()
{
var outputstr
outputstr = "abcd\r\nefgh"
alert(outputstr)
}
Its a been a while since I have used ASP, but I dont get while you are calling Response.BinaryWrite. The response is the output of the ASP page which I gather is the above code, so I don't see why your calling Response.BinaryWrite?
EDIT
I see why you are calling BinaryWrite, your first post does not use the <%=%> method of writing out the value. try converting the BinaryRead output to a string and running a replace on it.
James
James Simpson
Web Developer
imebgo@hotmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
modified on Thursday, May 8, 2008 10:42 AM
|
|
|
|
|
James Simpson wrote: Its a been a while since I have used ASP, but I dont get while you are calling Response.BinaryWrite. The response is the output of the ASP page which I gather is the above code, so I don't see why your calling Response.BinaryWrite?
Hello,
I am kind of new to ASP. so I was trying to different ways to extract string.
I tried the replace, but same result(error).
<%Dim Binary11<br />
Binary11 = Request.BinaryRead(Request.TotalBytes)<br />
Dim I, S<br />
For I = 1 To LenB(Binary11)<br />
S = S & Chr(AscB(MidB(Binary11, I, 1)))<br />
Next<br />
<br />
Replace S,"\r",Chr(13)<br />
Replace S,"\n",Chr(10)<br />
%><br />
<br />
outputstr = "<%= Server.HTMLEncode(S) %>"
|
|
|
|
|
Try:
S = Replace(S,Chr(13),"\r")
S = Replace(S,Chr(10),"\n")
I think you need to assign the return value of replace, and the parameters are the other way around (maybe??)
James
James Simpson
Web Developer
imebgo@hotmail.com
P S - This is what part of the alphabet would look like if Q and R were eliminated
Mitch Hedberg
|
|
|
|
|
Thanks James. Your replacement suggestion is working good. Only thing I have to solve now is handling '\' literal. If I have '\' in my string, it is missing when I assign it from server vbscript to cleint javascript. I tried replacing \ with \\, but no use.
|
|
|
|
|
HI
Is there any way we can hide the status bar of IE 7 programatically in javascript or in code behnind file of ASP.NET, not by setting the browsers setting manually from internet options in browsers, kindly reply ASAP, thankx in advance.
|
|
|
|
|
|
Dear web-programers:
i'm new in the code project site. I have been looking like crazy a script to upload images and add it to a form in my site.
The site I'm creating is for artists to sell their crafts online. I'm using the yahoo site builder to create the complete site.
I need this html/java script code to be added to a form. The script must be simple and to add an item / upload the image to the form. I will also like to have the option in the script that the image can be thumbnailed/enlarged. Once the form is completed and submitted by the artit, I need this image to appear and be re-directed in an specific page in the site.
So, I also need the script to have the option to be changeable by me. This way I can write in each form the artist gallery pages to re-direct the images to their galleries.
Maybe is an old fashion way to do it, but I need it to be simple for the moment. Maybe in the future I will go to an asp.net and a more dinamic way.
Please, help me! Or tell me where I can find this script.
Thanks,  ![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif) MaryG
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
