|
2 at most. (IMO Fowler is wrong on this topic).
I don't copy code if I can avoid it. Fewer lines of code is less hassle, so if I need something
in a second location, I refactor.
And dual use is not a necessary condition either, even a single use can be sufficient to trigger
a refactoring into a separate method; possible reasons: improved readability; unit testing;
possible future reuse; ...
The above holds for a single programmer. Teams of programmers may find it more difficult to apply.
|
|
|
|
|
To add to the previous two posts:
http://c2.com/cgi/wiki?RuleOfThree[^]
Before reading the associated discussions, I would have said "two". But now... as a rule of thumb, it can help to balance Copy+Paste vs. premature generalization.
My experience shows that generalizing something requires a much more complex contract, you have to clearly define error handling and odd cases that don't even occur in the two simple instances. Thus the generalized implementation (including it's contract, documentation requirements etc.) may well be more complex than the sum of the two simple instances.
So maybe make a guess at the "Total Cost of Ownership" plus cost of "acquisition of the shared implementation".
We are a big screwed up dysfunctional psychotic happy family - some more screwed up, others more happy, but everybody's psychotic joint venture definition of CP
blog: TDD - the Aha! | Linkify!| FoldWithUs! | sighist
|
|
|
|
|
I have developed an application architecture and we are all using it here at my company. Problem is, some of the guys are having problems getting their heads around it and now I am having doubts myself. I will try and explain without rambling on too much.
What I have is a web service with methods similar to the following for marshalling data back and forth between the client and server:
public SimpleBusinessEntity Save(SimpleBusinessEntity entity);
All classes in the application derive from SimpleBusinessEntity. The only field that SimpleBusinessEntity contains is the EntityType field which is an enum value to determine its type i.e. Tariff, Contract
Using the base entity class means I don't have to create web methods for each type of entity i.e. SaveTariff, SaveContract etc. When the client sends an entity to a web method, I check the EntityType property of the SimpleBusinessEntity and then call the appropriate workflow class which will process that type of business entity i.e. TariffWorkflow. So the server-side TariffWorkflow class would have a method such as:
public TariffEntity Save(TariffEntity entity);
Do people on this forum use similar techniques? I have developed a number of applications using this technique and I think it works well. It is easy to maintain and enhance. The problem I have is explaining it to others and getting them to understand the concept. These are experienced people. Have I made it too complicated?
Thanks in advance,
Adam
|
|
|
|
|
Based upon your description appears fairly straightforward. What is it that they don't understand? Are they VB developers? 
|
|
|
|
|
Thanks for your response.
Yes, we were all VB developers here.  I moved over to c# about five or six years ago. Some of the others haven't been able to do this, so their c# exposure has been in fits and starts. Maybe I am just no good at explaining it. 
Adam
|
|
|
|
|
Adam Jasper wrote: These are experienced people.
[rhetorical since the VB cat is out of the bag] Experienced in what, breathing? [/rhetorical]
Adam Jasper wrote: Have I made it too complicated?
No. But it's not object oriented because this:
Adam Jasper wrote: The only field that SimpleBusinessEntity contains is the EntityType field which is an enum value to determine its type i.e. Tariff, Contract
is not object oriented. However since your peers can't even understand what you are doing now they sure as hell would be totally lost if you implemented an object oriented solution so I guess that's not a consideration.
led mike
|
|
|
|
|
led mike wrote: is not object oriented. However since your peers can't even understand what you are doing now they sure as hell would be totally lost if you implemented an object oriented solution so I guess that's not a consideration.
Sorry led mike, you will have to explain that one to me, how is it not object oriented? SimpleBusinessEntity is an abstract class that has one property and a few abstract methods. All other classes derive from SimpleBusinessEntity because essentially every other business entity can be considered a simple business entity. Some processes only work with simple business entities using the EntityType property and the methods. How is that not object oriented? I am interested to know your thoughts.
Regards,
Adam
|
|
|
|
|
Adam Jasper wrote: Sorry led mike, you will have to explain that one to me, how is it not object oriented?
The answer to that question is to explain Object Oriented Design. Obviously I can't do that since entire books and web sites have been dedicated to that very explanation and still mostly fall short of giving any individual that knowledge. Perhaps it's because one person cannot give the understanding of OOD to another person. Perhaps understanding OOD must be arrived at by taking a journey down that path. Wow that was bunch of fluff eh?
A short statement I might make to even point you in a direction is that what you describe might be referred to as "using objects" as opposed to "object oriented". I know that probably doesn't help, but like I said, short of writing a book.
This is kind of weird since I just posted this[^] like 15 minutes ago
Also Web Services do not tend to be Object Oriented because of their remote nature they are generally a request-response oriented interface.
led mike
|
|
|
|
|
I too have read many books, articles etc about object oriented programming. Nothing I mentioned in my original post broke any of the rules as far as I know. I can only assume you are talking about my use of the enumeration constant. I have read some articles that suggest they should no be used. However, since I never cast to another type I don't see the problem.
I do agree that it is very difficult to pass on OO knowledge. I have been doing it for about 12 years now and no matter how many times you tell them what you are going to tell them, tell them, then tell them what you told them you still get asked the same questions.
I am only using the web service to marshall data back and forth between client and server. Basically, when the UI calls the tariff.Save method, the Tariff business object converts itself to a Tariff business entity and asks the web service to save the business entity. This is as you suggest, a request/response oriented interface.
Thanks for your time,
Adam
|
|
|
|
|
Adam Jasper wrote: I have read some articles that suggest they should no be used.
Well that's not what I said. It's not object oriented is what I said, that doesn't mean you shouldn't do it, it only means you should understand the ramifications of a non object oriented solution in that particular context and make an informed decision. One example of what a non object oriented solution means is, you will have to change existing code to extend functionality rather than implement a new class that encapsulates the new functionality. In your case for example you have to change the enum and likely code that uses the enum, this is likely what you have read others saying you should not do and can also be referred to as Technical Debt[^].
All that said, there are Software Design Patterns that can be used to avoid the enum approach you have implemented. Utilizing these patterns normally allows you to implement a OO design where introducing a new class is all that is required to extend functionality. No existing code is changed. The historically proven benefit of that is an increase in quality. This means reduced ripple effect and less chance of errors that result in system failure. The larger and therefore more complex a system is the greater the odds become of resultant errors due to Technical Debt. Furthermore studies have proven that the cost to the company of dealing with errors can be 100 fold greater than doing the upfront design and development to eliminate the Technical Debt.
No doubt since you have been doing this for 12 years and read all sorts of stuff you already know all that.
led mike
|
|
|
|
|
Yes, enums do violate the open/closed principle as they cannot be extended. However, as long as you only add new values to the end of the enum and do not change any existing values I think it is generally considered to be acceptable to use enums in OOD. I have yet to see a design pattern that solves this problem completely, what design patterns are you referring to?
You are correct to say it is a design decision. I do make some rules that I adhere to myself regarding enums i.e. I never cast to another type to iterate through the values because this could break existing code if I add a new value to the end. I do need to modify classes to check for a new enum value, however, I only add code, I don't change existing code. Therefore, if I cannot say my design is object oriented then so be it. It is a lot simpler than any of the other alternatives I have seen.
Thanks for your comments,
Adam
|
|
|
|
|
led mike wrote: Experienced in what, breathing?
led mike wrote: is not object oriented
To be fair he never said it was: he really only asked if it was understandable or too complicated, which, of course , for VB 'programmers', it is.
|
|
|
|
|
digital man wrote: To be fair he never said it was:
The what does that subject line say? 
led mike
|
|
|
|
|
Um, yes I suppose one could read it that way: interpretation is everything. I ignored the heading and concentrated on the question: my mistake.
|
|
|
|
|
You have something like this?
public SimpleBusinessEntity Save(SimpleBusinessEntity entity)
{
switch(entity.EntityType)
{
case EntityType.TariffEntity:
tariffWorkflow.Save((TariffEntity)entity);
break;
case EntityType.Contract:
contractWorkflow.Save((Contract)entity);
break;
default:
Debug.Fail();
break;
}
}
Is this more or less correct?
In an object oriented approach, you use polymorphism to do the dispatching. This means creating several Save methods, one for each type:
public void Save(TariffEntity entity)
{
}
public void Save(ContractEntity entity)
{
}
The general consensous is that it's easier to maintain the latter approach than the long switch statements. This is especially true if you have several switch statements duplicate switch statements throughout your code.
Having said this, there are times where switch statements are appropriate. At the boundary of an application (which may apply here) you may find yourself having to switch on data in order to transform it into a form the rest of the application can use. For one thing, C# doesn't support double dispatching, so having several Save methods like the above may not work.
At any rate, hope something in the above provides some insight.
|
|
|
|
|
Hi Leslie,
Thanks for your comments, much appreciated. I don't actually need to use a switch statement in this case. I try and avoid it where possible. Really the only time I use a switch statement is in a factory class, I can't think of a way around it in some instances.
I'll explain how I have avoided a case statement with code snippets (this is off the top of my head as I don't have the actual code to hand at the moment):
private Dictionary<BusinessEntityType, IEntityWorkflow> _workflows;<br />
<br />
public PersistenceWorkflow()<br />
{<br />
_workflows = new Dictionary<BusinessEntityType, IEntityWorkflow>();<br />
<br />
InitialiseEntityWorkflows();<br />
}<br />
<br />
protected virtual void InitialiseEntityWorkflows()<br />
{<br />
_workflows.Add(BusinessEntityType.Tariff, new TariffWorkflow());<br />
_workflows.Add(BusinessEntityType.Contract, new ContractWorkflow());<br />
}<br />
<br />
then, the actual save method is something like this:
public SimpleBusinessEntity Save(SimpleBusinessEntity entity)<br />
{<br />
IEntityWorkflow workflow = _workflows[entity.EntityType];<br />
return workflow.Save(entity);<br />
}
The implementation of the IEntityWorkflow.Save method in TariffWorkflow would cast to the relevant type e.g. TariffEntity.
I know the one disadvantage of this design is that I am instantiating more objects than I am going to use, however, I think it is a small price to pay for a very extensible design and I will never have that many entity workflows.
Regards,
Adam
|
|
|
|
|
Ah, I see. You've created a table with the enumeration values acting as indexes into the table; it's a dispatch table.
That's ok, but what you're doing is recreating the virtual table that C# gives you for free using polymorphism. I'm not advocating that you change this; if it's working for you, stick with it. Just be aware that when using virtual methods, the language creates the table for you internally.
Having said that, there have been times when I've used similar approaches, usually to make up for C#'s lack of double dispatching (and I don't feel like implementing Visitor).
|
|
|
|
|
Hi Leslie,
Thanks again for your comments.
I did originally want to use the Visitor pattern but I will extend the application with more elements and I think that is where the Visitor pattern falls down. I did look at another pattern, a quick search on Google tells me it was called Acyclic Visitor, however, it didn't tick all the boxes either.
Regards,
Adam
|
|
|
|
|
How can i make good s-box easily (against linear and differential attacks)? If i used prepaid one that may belongs to someone or standard ciphers then it would be plagiarism right? So i need to make own s-box (8 bit input, 8 bit output (16x16)). Please Please suggest me any way to decide it. Thank you.
|
|
|
|
|
What's an s-box?
"The pursuit of excellence is less profitable than the pursuit of bigness, but it can be more satisfying."
- David Ogilvy
|
|
|
|
|
The s-box in cryptography is named like Substitution box (a.k.a substitution table).
|
|
|
|
|
Ahh..out of my area of expertise then.
"The pursuit of excellence is less profitable than the pursuit of bigness, but it can be more satisfying."
- David Ogilvy
|
|
|
|
|
Use standard ciphers. Fiddling with your own substitutions might accidently introduce weakness. The framework provides a whole bunch of CSPs you can use royalty free anyway - theres very little reason to implement your own cipher, and lots of reasons not to.
|
|
|
|
|
We have a web app that is developed using VB, ASP and SQL SERVER. Some parts (10-15%) of the web app are developed using asp.net 1.1.
Now, we want to:
- move one of the modules say CRM to asp.net 2.0 that is written in VB and ASP.
- support the CRM module written in VB and ASP until the re-written module using .net is ready to use.
- incorporate any changes happen in old code into new .net code immediately.
- Leverage the power of AJAX AND Windows workflow foundation
Existing system:
- The CRM module uses others DLLS written in VB and vice-versa.
- We have all the classes required for CRM DLL developed in VB. Example :> Let say we have a biz object class which contains all the biz attributes (properties) as well as methods and called from ASP page. We also have a corresponding data object class which has only corresponding methods as Biz object and interacts with DB and return the results to Biz object.
- We have all screens required for CRM developed using ASP and JAVASCRIPT.
As a .Net senior developer, my responsibilities include:
1 - Create all CRM VB classes in C# to improve performance, better use technology, and remove redundancy
2 - Analyze the classes and Apply design pattern wherever possible
3 - There must be not any problem when the CRM module is completely re-written as the new .net dll for CRM should be able to call other VB DLLS and vice versa.
4 - All pages for CRM module must be re-written using ASP.NET, AJAX and Windows workflow foundation
Need suggestions:
- Should I do requirement analysis again or it is not required since the requirement is already there.
- Should I create all the VB Biz classes as it in C# and then apply design pattern wherever possible.
- Should I create the Net wrapper DLLS for all the VB DLLS that need to be referred by CRM .Net DLL and vice-versa.
- No problem if I use AJAX AND WORKFLOW
Please let me know if you have other suggestions.
|
|
|
|
|
Hi guys!
Can anyone point me to a good tool that would help to generate a structured list of functional requirements (features) such as found in software requirements specifications (SRS)? I can type all that in Word, but it's a hassle and I'am looking for a more automated way to do those lists.
What I am looking for is an app where I could:
1. Enter a new feature/requirement. This gets an ID, etc.
2. Enter some other requirements. The list is growing...
3. Link requirements, so they are visible in a tree-like structure, say REQ-3-2-2 depends on REQ-3-2-1, something like that.
If I could export that to Excel or generate a report it would rock.
I saw a web based application once which allowed the user to create a list of requirements like this and do some (interactive!) mockups, I believe I got it in CP newsletter a few months ago and I can't remember the name, neither I have it in my mailbox.  I know it started with "S" (not very helpful, eh?).
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
