C / C++ / MFC

how to resolve WM_MOUSEMOVE message when a button was disabled

19-Mar-08 3:22

Have you looked at NetStatisticsGet(), or any of the IP Helper functions.

http://msdn2.microsoft.com/en-us/library/aa366071(VS.85).aspx[^]

"Normal is getting dressed in clothes that you buy for work and driving through traffic in a car that you are still paying for, in order to get to the job you need to pay for the clothes and the car and the house you leave vacant all day so you can afford to live in it." - Ellen Goodman

"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne

kcynic18-Mar-08 23:31

kcynic

18-Mar-08 23:31

here is a button,it will show a tip window when the mouse is moving above it if it's enabled.
now,the button is disabled.but i still want to show a tips window when the mouse is moving above it.
my problem is,when the button is disabled,it seems that it can't recieve any messages now.
how to resolve such problem?

regards.

Re: how to resolve WM_MOUSEMOVE message when a button was disabled

Rajesh R Subramanian18-Mar-08 23:37

Rajesh R Subramanian

18-Mar-08 23:37

These links may help you:

Why can't I display tooltip for a disabled window?[^]

Tooltip for disabled controls[^]

Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP

Re: how to resolve WM_MOUSEMOVE message when a button was disabled

kcynic19-Mar-08 3:18

kcynic

19-Mar-08 3:18

yes,its helpful to me.
Thanks.

Re: how to resolve WM_MOUSEMOVE message when a button was disabled

ThatsAlok19-Mar-08 19:48

ThatsAlok

19-Mar-08 19:48

great tips Smile | :)

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
Never mind - my own stupidity is the source of every "problem" - Mixture

cheers,
Alok Gupta
VC Forum Q&A :- I/IV
Support CRY- Child Relief and You/codeProject$$>

about parameter passing

savitri18-Mar-08 23:18

18-Mar-08 23:18

Hi everyone,
Please Help me that how to pass the parameters to the activex controls.Please tell me.
i am writing one OCX file.in that file i am doing read and write functions. and in another project i am using that OCX.When i am passing parameters to that function then that time values taking as null.in runtime when i given some values to that parameters that time also they are takingas null only.in VC++ how can i pass the parameters by refence please. In OCX file write function is
READBLK(LPCTSTR MemId, LPCTSTR MemName, LPCTSTR eDate, LPCTSTR Balance, LPCTSTR TagId);
and in my main project write block is like this:
OCX.READBLK(MemId,Memname,Date,Balance,Tagig)
{m_MemId=MemId;}like this i am assigning the value.
these MemId,Memname,Date,Balance and Tagid are of type CString
after writing the data in the card.after writing i want read that data from the card but the data is not printing on the form or not returning to my project from OCX file.

Please Help me i am in tension.
THANKU IN ADVANCE,
savitriX|

CPallini19-Mar-08 0:30

19-Mar-08 0:30

You post is not clear. Please explain you problem neatly and elaborate whenever necessary.
Smile | :)

If the Lord God Almighty had consulted me before embarking upon the Creation, I would have recommended something simpler.
-- Alfonso the Wise, 13th Century King of Castile.

This is going on my arrogant assumptions. You may have a superb reason why I'm completely wrong.
-- Iain Clarke

savitri19-Mar-08 0:55

19-Mar-08 0:55

ok i will explain. i am creating one ACtiveX control called ACRRW. in that ACTiveX control i am writing methods called ReadBlk() and WriteBlk().
ReadBlk(LPCTSTR MemId,LPCTSTR MemName,LPCTSTR eData,LPCTSTR balance,LPCTSTR TagId); and Write(LPCTSTR MemId,LPCTSTR MemName,LPCTSTR eData,LPCTSTR balance,LPCTSTR TagId);

and i am using this ACtiveX Control in my another project called ACRReadWrite Automation Project.
in this project i am creating m_ACRRW variable as ActiveX control.
in my i am putting two buttons called Read and Write.in this Read and Write button functions i am calling the functions those are already present in ACtiveX Control.
m_ACRRW.ReadBlk(MemId,MemName,eDate,Balance,TagId);
MemId,MemName,eDate,Balance and TagId are of type CString.
m_ACRRW.WriteBlk(m_MemId,m_MemName,m_eDate,m_Balance,m_TagId);
m_MemId...m_TagId are of type CString.

i am facing problem in Read Block that is my values are written in card but after reading those data they are not printing on the screen.
i thought that i did mistake in passing parameters.PLEASE HELP ME OUT.
give me some solution.

THANKU IN ADVANCE,
savitri D'Oh! | :doh:

CPallini19-Mar-08 1:03

19-Mar-08 1:03

Hence WriteBlk works fine while ReadBlk not. Could you post ReadBlk relevant code?

[Message Deleted]

savitri19-Mar-08 1:17

19-Mar-08 1:17

[Message Deleted]

Demian Panello19-Mar-08 1:44

Demian Panello

19-Mar-08 1:44

Did you try to debug the OCX project putting a breakpoint in the ReadBlk and see what is happening?

Demian.

"I have always wished that my computer would be as easy to use as my
telephone. My wish has come true. I no longer know how to use my telephone."
-Bjarne Stroustrup, computer science professor, designer of C++
programming language (1950- )

savitri19-Mar-08 2:04

19-Mar-08 2:04

Ya i tried the control is passing from project to ocx nad vice versa but the problemis that the data is not coming back to my project and not printing on the screen. please give some solution.

Thanku in advance,
savitri Confused | :confused:

CPallini19-Mar-08 2:06

19-Mar-08 2:06

The problem is in your approach on passing strings that actually are OUT parameters.
As simple solution you may mimic WIN32 API GetWindowText behaviour, i.e. for each string that must be filled by the ActiveX control, pass the pointer of a buffer (allocated by the client) and the buffer size to the control.
A simple example:

ActiveX code

BOOL ReadBlk(LPSTR MemId, LONG MemIdSize)
{
  if ( !MemId || MemIdSize < 1)
    return FALSE;
  
  strncpy(MemId, "Hello Client!", MemIdSize-1);
  MemId[MemIdSize-1]='\0';
  return true;
}

Client code

const int SIZE=0x100;
CHAR MemId[SIZE];
m_ActiveX.ReadBlk((LPSTR) MemId, SIZE);

David Crow19-Mar-08 3:44

19-Mar-08 3:44

savitri wrote:
...or not returning to my project from OCX file.

Exactly how are you expecting this to happen? You effectively have the following:

BOOL CACR120RWCtrl::ReadBlk( LPCTSTR MemId )
{
    CString dStr;
    ...
    MemId = dStr;
}

In this context, the MemId can be changed to point to something else, but only within ReadBlk(). Once ReadBlk() goes out of scope, MemId goes back to pointing to whatever it pointed to before ReadBlk() was called. If you want MemId to point elsewhere, you'll likely need to change the parameters to char ** instead. You can also change it to a char * and use strcpy() to change its contents.

CPallini19-Mar-08 4:26

19-Mar-08 4:26

Of course you are right.
However I don't think passing a char ** will be the best approach there.
Probably passing an allocated buffer (like GetWindowText behaviour) will be better. I know it's a matter of taste but whenever the OP isn't an expert I'm afraid of suggesting the "server-memory-allocation, client-memory-deallocation" approach.
Smile | :)

David Crow19-Mar-08 4:30

19-Mar-08 4:30

CPallini wrote:
However I don't think passing a char ** will be the best approach there.

I never said it was. It was merely a suggestion for the OP to explore.

savitri19-Mar-08 19:45

19-Mar-08 19:45

hi DavidCrow,
I modified Cstring to char** but the control is not passing.i modified in OCX project.but i am not getting anything.please tell me how can i do it.
PLEASE HELP ME.I am TRYING MY LEVEL BEST BUT I AM FED UP.PLEASE HELP ME.
I AM VERY THANK FUL TO U ALL.REALLY I LEARNED SO MUCH BUT I AM NOT GETTING ONLY THIS OUTPUT.i am having data in OCX but it is not returning to my project.PLEASE......

THANKU,
savitri Roll eyes | :rolleyes:

David Crow20-Mar-08 2:28