|
I didn't do it that way - it may be a new feature in Visual Studio. As I said, I did it a number of years ago but how I did it then was solely with Platform Builder. The CE PC was just another available platform in PB and was initially built independent of the application.
Good luck
Judy
|
|
|
|
|
It seems so, http://www.windowsfordevices.com/articles/AT8361803439.html
Ive always wanted to do it, but I did not get it to work, if you do feel free to let me know 
//Johannes
|
|
|
|
|
We ran into the above problem at work during the week.
The scenario is: at one point application was running normally then apparently without any software changes it fails on startup with the above error. It also says it's a System.Net.WebException. (I say "apparently" because there was a hardware change and the overall system is quite complex, with a PLCs and Linux software involved as well).
A bit of Goggling led me to this:
http://communityserver.org/forums/p/485800/574163.[^]
which seems similar to what we had except that "run as administrator" didn't work for us.
Are there other scenarios that can cause this?
When I left work yesterday some guys were still looking into this so they may well have solved it but I said I would do some further posting on forums to see if anything else is uncovered.
I didn't actually write this part of the software but it is starting up a bunch of WCF services among other things.
The Vista version is Vista Business. Automatic Updates are turned off.
Kevin
modified on Saturday, February 23, 2008 10:09 AM
|
|
|
|
|
hi all
My requirement is to use crystal reports in an asp.net web application, and my server OS is 'Windows Small Business Server 2003'. The problem is ,
i am not getting icons related to 'crystal decisions tool' and whenever i click on any one of icon i am getting a script error ..
plz help me.
Thanks in advance
SAI KIRAN
|
|
|
|
|
Have you looked around on CR website?
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
I had a pc problem reciently. I'm running windows xp sp2. It suddenly became unstable, and crashed a few times, and when it rebooted zone alarm and my virus checker were suddenly gone. When I try to start either of these it gives me "this is not a valid windows executable" and same thing happens when I try to reinstall them. Also I can't start in safe mode, the pc just restarts if I try. All other programs work fine and it no longer crashes. I have a bad feeling that I have somehow got a trojan on my pc. Anyone know a way to fix the problem, other that formating the disk drive and re-installing windows?
|
|
|
|
|
Yes, since you say your security applications got disabled/currupted right after the computer was unstable i would also think it might be some kind of malware. Since you now have difficulty to get into safemode, or some other mode to remove it when the malware(s) are not running i would suggest UBCD[^] as it has some antivirus scanners you can run right off the CD, without depening on the OS on the HDD.
In some cases the damage can allready be done to varius other parts of the system, in which you may not think of them to be virus related, therefore it might sometimes be better to re install everything.
But UBCD is worth a try.
Manual editing (IE you get into safe mode) is also worth a try.
Hope this helps..
//Johannes
|
|
|
|
|
In the end I had to reinstall windows, but thanks for the tip anyways
|
|
|
|
|
You welcome,
Ah well, a fresh copy of Windows is always nice
//Johannes
|
|
|
|
|
Hi,
I got a laptop in my shop, it is huge... Siemens nixdorf scenic mobile 700. It is used in a automechanic shop to analyze modern cars...
The problem is very simple, the screen of the laptop is very small 800x600 maximum resolution, and somebody got their hands on the laptop and changed display settings, setting the fonts to 500%, so when windows boots i can see only 20% of the screen, everything i super large, I went to safe mode, and changed those settings to normal couple of times, and it doesn't work, it can't change it for some reason, it says ok- restart computer, but when I do restart the 500% is still there, I have tried in normal mode ( by connecting a second monitor so I could see what i'm doing) and same thing.
Any ideas...
And is there a way in win95 to change all the settings on the OS to default values...?
this problem is very challenging and frustrating...
Thank you!
|
|
|
|
|
Check with another Windows 95 machine and find out the keyboard shortcuts to reach the display settings and use those shortcuts on your laptop.
Nobody can give you wiser advice than yourself. - Cicero
.·´¯`·->Rajesh<-·´¯`·.
Codeproject.com: Visual C++ MVP
|
|
|
|
|
Reboot with safe mode and uninstall display driver from device manager. When system will reboot it will ask you for display driver, just install them.
|
|
|
|
|
When displaying a dialog form with BorderStyle = FixedDialog in Vista with Aero, SystemInformation.Border3DSize.Width and SystemInformation.BorderSize.Width both give incorrect sizes (seems to be 2px too small).
Does anyone know a workaround for this? I don't really want to alter the value manually as it will then be incorrect if a different theme is used.
Dave
|
|
|
|
|
I recently signed up for no-ip and got things working on my local machine but no one else can reach my site.
1) I type http://localhost Ok
2) I type http://woodware.no-ip.biz OK
3) I have my computer networked with another computer running Server 2003 and type
http://woodware.no-ip.biz. OK
I'm running XP Pro
I've set up my IIS to point to my site and set all permissions, etc. I need I believe?
Set an exception in my Firewall for Port 80
Is there something I've missed?
Has anyone done this using no-ip?
Any gotchas?
Or anything I might have overlooked?
There support sucks!
Thanks in advance. This is my first attempt at setting up a site so any help would be appreciated.
Mike
|
|
|
|
|
Looked up http://woodware.no-ip.biz and it returned IP 75.92.115.47
With the IP address, ping takes 280 ms roundtrip and an average of 525 for the www address.
But no HTML data is returned.
Presumably you have set port forwarding on your router ?
modified 1-Aug-19 21:02pm.
|
|
|
|
|
Thanks for your response, I was thinking a config problem but,
I don't have a router am running straight out of my box. Is there a setting in my network device I need to set to not forward?
Thanks for your help...I;m so close that its frustrating.
Mike
|
|
|
|
|
|
Richard,
Thanks, I know the risks. Once I get it going I want to transfer the site to the machine I'm using as my server and I don't care what happens to it and I can block/firewall from my machine? Basically just want to learn how to do it, limitations, etc. and also to allow some family to exchange pics. etc..
Thanks for the help
Mike
|
|
|
|
|
Post here when you think you have got it working and i'll test it for you.
modified 1-Aug-19 21:02pm.
|
|
|
|
|
Thanks
The problem is I've done all that and still not working. I've called my provider to see if they are blocking it and they say no. But if I can enter http://woodwar... and it returns it on both my machines I know its getting to no-ip and they are redirecting DNS back but I'm thinking theres something I just haven't set up on my machine to allow IUSR_nnn to enter?
Try it if it don't work I give up?
Thanks,
Mike
|
|
|
|
|
Not sure what you are going to make of this ...
Both ANT tools and WS_PingPro pack tells me that http://woodware.no-ip.biz is IP 79.92.115.47
but
I am getting conflicting data returns. Centralops.net thinks the IP address is 204.16.252.108 and is timing-out and using jellybaby.net for traceroute it can't get past item 7 on the list below. And ANT tools can't find woodware.no-ip.biz and WS_PingPro cannot resolve 204.16.252.108
==============================================================================
from http://centralops.net/asp/co/Ping.vbs.asp
Pinging http://woodware.no-ip.biz [204.16.252.108] with 32 bytes of data...
Results
count ttl (hops) rtt (ms) from
1 Timed out
2 Timed out
3 Timed out
4 Timed out
5 Timed out
==============================================================================
from http://www.jellybaby.net/tr/tr.pl?host=79.92.115.47
Here we go...
1 finch-core-1.router.jellybaby.net (194.159.247.129) 0.767 ms 0.696 ms 0.675 ms
2 finch-service-1-13.router.demon.net (194.159.253.247) 1.379 ms 1.025 ms 0.996 ms
3 finch-backbone-12-162.router.demon.net (194.159.36.66) 3.246 ms 2.945 ms 2.925 ms
4 tele-backbone-12.router.demon.net (194.159.7.4) 4.966 ms 4.930 ms 4.884 ms
5 tele-inside-2-g3-0-0-s262.router.demon.net (194.70.98.249) 1.843 ms 1.799 ms 2.358 ms
6 anchor-border-1-g1-0-0.router.demon.net (194.70.98.6) 2.106 ms 2.827 ms 2.273 ms
7 linx.n9uf.net (195.66.224.214) 10.848 ms 10.988 ms 10.841 ms
8 * * *
9 * * *
10 * * *
11 * * *
12 * * *
13 * * *
14 * * *
15 * * *
16 * * *
17 * * *
18 * * *
19 * * *
20 * * *
21 * * *
===============================================================================
The ball returns to your court for you to investigate further. Sorry.
modified 1-Aug-19 21:02pm.
|
|
|
|
|
Again thanks for your help,
I think the confusion is my ISP (Clearwire - they absolutely suck) The tech rep I talked to said they change the IP's everyday but mines been at 75.92.115.47 since I started this several days ago.
So I got to think they may be doing some kind of forwarding or something thats not allowing traffic to get to me. I give up, but I do appreciate your input and assistance. I've got 6mos. left on a 2 yr. contract with them and I'm gonna drop them and pick up a decent provider. Can you recommend any cheap host sites?
Thanks again,
Mike
|
|
|
|
|
Mike Hankey wrote: Can you recommend any cheap host sites
That has been asked far too many times on these forums. And there has been almost as many different answers.
Here is one to look at but I have no idea how good/bad/indifferent they are http://www.discountasp.net/[^]
modified 1-Aug-19 21:02pm.
|
|
|
|
|
Yeah theres been a lot of debait on the subject but I never paid no never mind before because I wasn't in the market.
Anyway thanks for your input I'll check it out and go over some old post and see what I can dig up!
Have a goodun,
Mike
|
|
|
|
|
I have windows XP machine on which I have VS.NET 2005 and
sql server 2000 client tools installed.
I want to install wss3.0 on this machine.
So please provide list of softwares that I will have to install along
with wss3.0?
Thanks in advance
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
