|
I would like to know how i can play a wave file through TAPI. My requirement is to hook up to a telephone number through a Modem and when the connection is successful, the application should play a wave file.
I have succeded in connecting to a Telephone line using TAPI
Can some one help please.
Harihara Subramanian
|
|
|
|
|
It's always a confusing problem to me:when i finish a application and want to distribute it,i must create a setup and make a package for it.But how can i know which components(like DLLs,.OCX,.tlb and so on) i need and which information i shall write into registry...
In fact,i wrote a program in VB,then i use the tool "Package and Deployment" to create a package.But when i tried to setup it to test,it failed,noting me that the file "$(selfRegistryEx) " not found in my Temp folder.I dont know where's wrong 
Everyday will be holiday because of you
|
|
|
|
|
The package and deployment wizard is a good tool, and its always detected all COM dependencies for me.
You might want to try the Visual Studio Installer. It uses the newer Windows installer .msi format. (Requires InterDev)
Note however I think that there's a problem with using vsi1.1 for VStudio 6 and having Visual Studio.NET installed on the same machine. But in that case I beleive you can use VS.NET deployment project to package your VB6 project.
|
|
|
|
|
Although they cost money, installshield makes some pretty good products. You should check them out @ installshield.com. But like I said, they'll cost ya.
|
|
|
|
|
What about VC programs? Are these tools available to applications written in all environment(or in any language)?
Everyday will be holiday because of you
|
|
|
|
|
I have massive spreadsheets of data to wade through and am hoping to automate the process.
I would like to make a chart of the data (x-axis is time stamp) and then have a script/macro so that I can go through plot and pick off data points by clicking on the plot. The script would read off the time-stamp and value of the closest point to my mouse click and paste it into another Sheet. I currently have to hold the mouse over the data point until the value pops up in a Tool-tip and then manually enter the value, or copy it from the original massive list.
Thanks for any ideas or suggestions!
Eric
|
|
|
|
|
found something that might have answered my question, though I'd still like to hear your ideas...
http://www.geocities.com/jonpeltier/Excel/Charts/index.html#PointInfo
|
|
|
|
|
has anyone here been able to get this control from Carlos H. Perez:
http://www.codeproject.com/cs/miscctrl/OutlookBar.asp
...to work in VB.NET?
I have been trying to convert the sample application over and am running into a few headaches that I can't seem to solve.
|
|
|
|
|
You could always use Carlos's Outlook control within your VB.NET application, that's what is great about the framework. You were trying to port this over to VB.NET weren't you???
Nick Parker
|
|
|
|
|
Not the control, just the sample application. I have it done now. I ran into some stickey parts trying to convert the C# sample over.
|
|
|
|
|
|
Hi,
How can I change the colors of the Standard
Scrollbar controls (HScrollBar & VScrollBar) in VB.Net ?
Thanks
Firoz
|
|
|
|
|
How can I fill ( or create ) a Enum using DB records as items ??
Or How can I override a enum declaration ?
( I want to add items to an Enum declarated in other class )
thanks
Marcelo Duarte
Uruguay
|
|
|
|
|
Sorry, but this a non-doable thing. Enums are named constants so their values are determined at compile time.
|
|
|
|
|
I got this proggie from the net.It has 2 parts(the source code) :the math part written in VC and the user interface written in VB.
The VC part is copiled as an OCX. So,since my only interest is to modify the user-interface, i open the VBProject and i "regsvr32" the OCX. As i try to make it .EXE (without modifying anything) it said:
"Line 15: Cannot load control txtText; license not found. Line 73: Cannot load control RichTextBox; license not found."
In Project/Components there where 6 references, but as i open the VBP file with notepad i see only 4. References for fm20.dll and richtx32.dll are NOT there.
So, i tried to "regsvr32" them but it did not work !
PLEASE HELP!THANK YOU!
|
|
|
|
|
To use the RichTextBox control in your application, you must add the Richtx32.ocx file to the project. When distributing your application, install the Richtx32.ocx file in the user's Microsoft Windows SYSTEM directory. For more information on how to add a custom control to a project, see the Programmer's Guide.
Cheers
It is Illogical to define an inventor by his invention
|
|
|
|
|
I want to access the current function name and class name in the body of the same function.
E.g: I have a class -class1 inside which I have a function- fnTest
private function fnTest() as string
dim sName as string
sName=???
//I want sName value to be : "Class1/fnTest"
end function
Sanjay
|
|
|
|
|
how could i parse this string:
"smiley<8><1315643>" say "test message" (dead)
to this type:
smiley say: test message (dead)
but smiley and test message could be different each time.
|
|
|
|
|
You will need to provide a bit more information than what you've given. To parse the values <8> and <1215643> would have to mean something. I'm not sure where those numbers come from. You will need thier translation table. It's all downhill from there.
|
|
|
|
|
How do create a floating window in VB6 that minimises when the main application is minimised.
I've tried using the SetWindowPos prcodedure contained in the user32.dll but the floating form doesn't minimise when the main application minimises.
Cheers
|
|
|
|
|
Just show the form with the main form as a parent.
Load frmChild<br><br />
frmChild.Show 0, frmMain
|
|
|
|
|
I’ve have a VB6 question about treeviews and tooltiptext. I would like to have node specific tooltiptext appear as I hover over the different nodes in a treeview (e.g. As Internet explorer does as I hover over my favorite links). Is there a way to accompish this?
thanks
|
|
|
|
|
Under VB6 I have created an application and added a Data Environment to it for accessing an MSAccess database. Having created a Command in it to represent a view(query) in the database I have dragged and dropped it on to a blank form.
When I run the app at this stage the form is correctly filled with the first record in the view. However, after making a call to the function of the same name as the view on the data environment on application startup to make sure the data is fully populated, I then added buttons to the form for navigation using MoveNext, etc (e.g. dataEnv.MyView - then dataEvnv.rsMyView.MoveNext). They don't work!!!!!
The recordset is being navigated correctly (checked via inspection in the Locals window) and the cursor is being changed, but the controls on the form do not change.
To add to the mystery, if I add a grid control to the form and bind it to the same view in the data environment, all of the records appear correctly in the grid. When the currently selected record is changed in the grid, the original controls update accordingly!!!!!!!!!!!!!!
Is there some subtle configuration that I have missed?
Derek Lakin.
I wish I was what I thought I was when I wished I was what I am.
Salamander Software Ltd.
|
|
|
|
|
I don't know what I did wrong on the first place but it has automagically fixed itself now
Derek Lakin.
I wish I was what I thought I was when I wished I was what I am.
Salamander Software Ltd.
|
|
|
|
|
I have an excel spreadsheet consisting of three columns
Column A is an account number, B and C a numerical value in each. I would like to place a flag in column D if there are repeats of the same numbers eg duplicates in column A.
I have been tying the following but it wont work. Does anyone have any ideas please?
=IF(COUNTIF(Range1,A2)>1,"Duplicate","")
In cell C1 is the title Range1. Cells A2 through C4000 are the named range Range 1
I have tried a couple of bits and pieces to do a very simple flag but cant seem to get them to work. The first was the one above, and another is this one:
=SUM(IF(A1:A2000=A1,1,0))
The idea being if any of the cells from a1 to a2000 is a duplicate of a1 then it gets an integer in the column I write the formula to. I had hoped if I copied it to each cell then it would look through the whole list. Not so though as I just get a long list of 1's rather than 1's and 0's.
If anyone does know of a way to id duplicates in this way I would be mst appreciative.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
