DB Date - C / C++ / MFC Discussion Boards

krishnakumar7520-Jun-07 5:20

20-Jun-07 5:20

I want to find why my applicaiton is failing. But my primary investigation there some code which are free() memory which are not properly allocated. I used Visual studio 6.0 debugger to do so.

So anything which helps to point out from which location/line/file the problem occurs will be helpful.

thanks

Krishnakumar

Re: Debug to detect Memory Leak

Mark Salsbery20-Jun-07 7:31

Mark Salsbery

20-Jun-07 7:31

Maybe this will help -

Memory Leak Detection and Isolation[^]

CRT Debugging Techniques[^]

"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder

Re: Debug to detect Memory Leak

Mark Salsbery20-Jun-07 8:05

Mark Salsbery

20-Jun-07 8:05

krishnakumar75 wrote:
I used _CRTDBG_MAP_ALLOC and _CrtMemState() to set set points in various location of application and compared to find the leak. Sometime it alerts for memory leaks and sometimes not.

Where you do checkpoints can effect the results. You need to make sure no allocations that
aren't freed are made between checkpoints.

I prefer to use a static class object so I can catch all leaks (except possibly any in other
static objects) that occur over the lifetime of the app.

I use this in one (usually the main) source module:

#ifdef _DEBUG
class _MemStateCheck
{
public:
   CMemoryState oldMemState, newMemState, diffMemState;
 
   _MemStateCheck();
   ~_MemStateCheck();
};

_MemStateCheck::_MemStateCheck()
{
   oldMemState.Checkpoint();
}
 
_MemStateCheck::~_MemStateCheck()
{
    newMemState.Checkpoint();
    if( diffMemState.Difference( oldMemState, newMemState ) )
    {
        TRACE( "************************\n" );
        TRACE( "Memory leaks Detected\n" );
        TRACE( "************************\n" );
        diffMemState.DumpStatistics();
        diffMemState.DumpAllObjectsSince();
    }
    else
    {
        TRACE( "************************\n" );
        TRACE( "No memory leaks Detected\n" );
        TRACE( "************************\n" );
    }
}
 
_MemStateCheck MemCheckObj;
#endif  //#ifdef _DEBUG

For MFC apps, I include this at the top of every source (cpp) file (under any #include lines):

#ifdef _DEBUG
#define new DEBUG_NEW
#undef THIS_FILE
static char THIS_FILE[] = __FILE__;
#endif

To get file/line numbers for malloc, you should use _malloc_dbg instead of malloc (it will use the regular malloc in non-debug builds):

// Allocate 128 bytes
//void *p = malloc(128);
void *p = _malloc_dbg(128, _NORMAL_BLOCK, __FILE__, __LINE__ );

"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder

Re: Debug to detect Memory Leak

Mark Salsbery20-Jun-07 8:12

Mark Salsbery

20-Jun-07 8:12

One more item - if you're coding in C++ and using malloc(), you might consider switching to
using new and delete instead! Smile | :)

Mark

"Posting a VB.NET question in the C++ forum will end in tears." Chris Maunder

Keystrokes for custom control in dialog

kylur19-Jun-07 3:45

kylur

19-Jun-07 3:45

I've created a custom control (a la article by Chris) to display a region of a bitmap. The control has vertical and a horizontal markers manipulated with the OnLButtonDown/OnLButtonUp/OnMouseMove handlers. The control is placed in a dialog. Now I'd like to add OnKeyDown support. Unfortunately, the dialog traps the WM_KEYDOWN message and just advances to the next control! Mad | :mad:

How do I get the WM_KEYDOWN message to the custom control?

Regards,
Kylur

Re: Keystrokes for custom control in dialog

Iain Clarke, Warrior Programmer19-Jun-07 4:04

Iain Clarke, Warrior Programmer

19-Jun-07 4:04

Have a look at WM_GETDLGCODE / ON_WM_GETDLGCODE. That should answer your questions!

Iain.

Re: Keystrokes for custom control in dialog

kylur19-Jun-07 5:34

kylur

19-Jun-07 5:34

Thanks! Exactly what I needed.

DB Date

Try19-Jun-07 3:34

Try

19-Jun-07 3:34

Hi all,

I am using CDynamicAccessor, CTable and other OLEDB API for database programming. I have a problem while inserting date field.
I am reading the date field from text file and the format of date is "M/d/yyyy". If System date format (Control Panel > Regional and Langauage Options) is "d/M/yyyy", then GetValue(Ordinal) retrieves NULL (in case of date greater than 12).
How to retrieve date field whatever may be the format of system date?

Thanks.

_declspec and uuid [modified]

Stephen Caldwell19-Jun-07 3:31

Stephen Caldwell

19-Jun-07 3:31

I'm in the unfortunate position of having to interact with mscorlib ( the .NET core library ) via COM. So I used regasm to generate a tlb of mscorlib and included the headers into my project. The headers build just fine in the debug build of the application, but the release build blows up with errors like this:

error C2628: '$S73' followed by 'void' is illegal (did you forget a ';'?)
error C2628: '$S74' followed by 'void' is illegal (did you forget a ';'?)
error C2628: '$S75' followed by 'void' is illegal (did you forget a ';'?)

(which as a result leads to a whole lot of other errors)
Which correspond to the following:
struct __declspec(uuid("b36b5c63-42ef-38bc-a07e-0b34c98f164a"))
/* dual interface */ _Exception;

struct __declspec(uuid("bca8b44d-aad6-3a86-8ab7-03349f4f2da2"))
/* interface */ _Type;

struct __declspec(uuid("35d574bf-7a4f-3588-8c19-12212a0fe4dc"))
/* dual interface */ IDictionaryEnumerator;

I haven't done anything that would introduce syntax errors into this file. Has anyone seen anything like this before?

I'm using Visual C++ 6 (I know I know. It's not my decision).

Thanks,
Stephen

-- modified at 10:02 Tuesday 19th June, 2007

I'm constantly improving every aspect of life. Not just my music, my rhymes but every facet requires its due attention to shine.

Re: _declspec and uuid

Matthew Faithfull19-Jun-07 4:33

Matthew Faithfull

19-Jun-07 4:33

The __declspec extension to support uuid may have been added after VC++6. I certainly never used it way back when. I don't have any docs capped at VC6 so I can't confirm it.
I'd use the old style

<br />
const IID IID_ISomeControl = {0x2212DD08,0x71C8,0x409d,{0x8A,0x50,0x96,0x66,0x12,0x16,0x6E,0xA8}};<br />

instead.

Nothing is exactly what it seems but everything with seems can be unpicked.

Re: _declspec and uuid

Stephen Caldwell19-Jun-07 5:11

Stephen Caldwell

19-Jun-07 5:11

Actually, the problem was that another header file was doing:

#define _Exception void

and that was causing the compiler to freak out.

Thanks,

Stephen

I'm constantly improving every aspect of life. Not just my music, my rhymes but every facet requires its due attention to shine.

Re: _declspec and uuid

Roger Stoltz19-Jun-07 5:12

Roger Stoltz

19-Jun-07 5:12

Matthew Faithfull wrote:
The __declspec extension to support uuid may have been added after VC++6.

VC6 supports the uuid attribute of __declspec.
Otherwise it wouldn't be possible to use __uuidof() and I've used that one a lot.

"It's supposed to be hard, otherwise anybody could do it!" - selfquote
"High speed never compensates for wrong direction!" - unknown

Problem with creating richeditctrl?

Banks K19-Jun-07 3:05

Banks K

19-Jun-07 3:05

Hello All,

i have dialog base application and I am try to create richeditctrl in oninitdiaog function follows :

m_RichEditCtrl.Create(WS_CHILD|WS_VISIBLE|WS_BORDER|ES_MULTILINE, CRect(10,10,100,200), this, 1);

but it doesn't show on dialog box

what i have forget please anyone tell me....

thanks

Re: Problem with creating richeditctrl?

Rolando Cruz19-Jun-07 3:29

Rolando Cruz

19-Jun-07 3:29

Hi,

Should work fine but...

Did you remember to enter AfxInitRichEdit2() in the InitInstance of the application?

Rolando

Re: Problem with creating richeditctrl?

Banks K19-Jun-07 3:36

Banks K

19-Jun-07 3:36

i forget this but now i have called this function but still it is now showing

what can be a problem?

Re: Problem with creating richeditctrl?

Rolando Cruz19-Jun-07 3:51

Rolando Cruz

19-Jun-07 3:51

Make sure you are calling the AfxInitRichEdit2() function at the begining of the application and not within OnInitDialog();

Also, did you declare m_RichEditCtrl as a CRichEditCtrl?

I tested this using VS 2005 version 8.0.50727.762 (SP.050727-7600) and your code was copied and pasted into the OnInitDialog without changes. All I then did was declare m_RichEditCtrl as a CRichEditCtrl.

Other than this I do not know what else to tell you. Hope this helps.

Rolando

File reading problem

Y_Kaushik19-Jun-07 3:05

Y_Kaushik

19-Jun-07 3:05

Hello Guru

I am making an application for reading .txt file from Hard Hisk and
copy this file to folder and save it name in database.

In this program i can read data from hard drive and copy the file to
folder Confused | :confused:

and also save its name in database.

Whenever i create a file in folder .(Its create successfully but
when try to reading contant of old file and writing new one an
assertion occor.

my code for that function is below.

CString str;
int ids;
CFileDialog Obj(TRUE);
if(Obj.DoModal() ==IDC_BUTTON3)
{
m_Upload = Obj.GetFileName();
}
str.Empty();
str = Obj.GetPathName();
SetDlgItemText(IDC_EDIT1,str);
///////////////////////////////////////////////////////////////////
/* reading file data from disk */
/////////////////////////////////////////////////////////////////
CString strLine = "";
CString buffer = "";
CStdioFile fileObj,filewrite;
CString fname;

fileObj.Open(str, CFile::modeRead | CFile::shareDenyWrite);

fname = fileObj.GetFileName();
// MessageBox(fname);

while(fileObj.ReadString(strLine))
{
fileObj.ReadString(strLine);
// fileObj.WriteString(fname);
buffer += strLine + "\r\n";
}
fileObj.Close();
// MessageBox(buffer);
SetDlgItemText(IDC_EDIT3,buffer);

fileObj.Open("c:\\UserFolder\\" + fname + ".txt",CFile::modeCreate,NULL);

Its run up to here successfully.

Its create a blank file in folder .

Now i am writing above code like this ( simple reading data from old file and writing it to new one an assertion occor . The code is below.

CString str;
int ids;
CFileDialog Obj(TRUE);
if(Obj.DoModal() ==IDC_BUTTON3)
{
m_Upload = Obj.GetFileName();
}
str.Empty();
str = Obj.GetPathName();
SetDlgItemText(IDC_EDIT1,str);
///////////////////////////////////////////////////////////////////
/* reading file data from disk */
/////////////////////////////////////////////////////////////////
CString strLine = "";
CString buffer = "";
CStdioFile fileObj,filewrite;
CString fname;

fileObj.Open(str, CFile::modeRead | CFile::shareDenyWrite);

fname = fileObj.GetFileName();
// MessageBox(fname);

while(fileObj.ReadString(strLine))
{
fileObj.ReadString(strLine);
// fileObj.WriteString(fname);
buffer += strLine + "\r\n";
}
fileObj.Close();
// MessageBox(buffer);
SetDlgItemText(IDC_EDIT3,buffer);

/*//////////////////////Copying file to another folder//////////////////////////*/
str.Empty();
fileObj.Open(str,CFile::modeRead);

while(filewrite.ReadString(strLine))
{

filewrite.WriteString(fname);
buffer += strLine + "\r\n";
}

fileObj.Open("c:\\UserFolder\\" + fname + ".txt",CFile::modeCreate,NULL);

How can i write content of old one to new one.

Any one Please told me .

Regard's
Kaushik

Re: File reading problem

Rolando Cruz19-Jun-07 3:38

Rolando Cruz

19-Jun-07 3:38

Hi,

Rather than reading the contents of the txt file to a buffer and then create and write it to the new file why not just do both at the same time?

<br />
CStdioFile fSrc, fDest;<br />
<br />
// Open Source and Create Destination files<br />
...<br />
<br />
while (fSrc.ReadString(strLine))<br />
{<br />
fDest.WriteString(strLine);<br />
}<br />
<br />
fSrc.Close();<br />
fDest.Close();<br />

Also, in your code you are missing the first line of the text file.

while(fileObj.ReadString(strLine)) <-- moves file pointer to next line<br />
{<br />
   fileObj.ReadString(strLine); <-- reads next line. 1st line is gone!!<br />
   ...<br />
}

Finally, unless you are making changes or scrapping the text file for any data why not use the ::CopyFile function?

Hope this helps!

Rolando

Re: File reading problem

Iain Clarke, Warrior Programmer19-Jun-07 4:08

Iain Clarke, Warrior Programmer

19-Jun-07 4:08

I would agree strongly with using CopyFile unless there is some compelling reason not to. NTFS files can include information on file streams that you wouldn't see by simply opening, reading and writing. While this would be rare, it can happen.

Also, you would be setting permissions on the new file to those of the user running your program. This *may* be what you want, but not necessarily.

I'm sure there are other reasons I can't think of right now.

Iain.

COM/DCOM is now what?

Rolando Cruz19-Jun-07 2:11

Rolando Cruz

19-Jun-07 2:11

Hello to all,

About 8 years ago I developed an client/server application for a client of mine using DCOM. I have not touched the subject since then. :->

I now have the need to revisit this technology but with all of the changes in software development I do not know what is being used now. Unsure | :~

Is DCOM still alive and kicking? Do I look at Web Services? Confused | :confused:

Thanks for your help in this matter.

Rolando

Re: COM/DCOM is now what?

bob1697219-Jun-07 4:34

bob16972

19-Jun-07 4:34

COM,DCOM,COM+, then came .NET

I used DCOM a few times but I regret it since it's so darn slow. I found the books on DCOM and COM+ are better used as references for COM techniques than for the technologies they represent directly.

Rolando E. Cruz-Marshall wrote:
Is DCOM still alive and kicking? Do I look at Web Services?

I could be way off, but from what I've seen DCOM was never really alive and kicking, IMHO.

Re: COM/DCOM is now what?

Rolando Cruz19-Jun-07 5:08

Rolando Cruz

19-Jun-07 5:08

In your opinion, is there an equivalent to DCOM in .Net? Is it Web Services?

It's been so long since I've worked with this I'm not sure which direction to go...

Rolando

Re: COM/DCOM is now what?

James R. Twine19-Jun-07 4:51

James R. Twine

19-Jun-07 4:51

   IIUC, .NET uses COM behind the scenes, for some things... Note sure if specifically DCOM, but anything is possible.

   If specifically asking about remote object access, then yes, SOAP and web services are likely the way to go.

   Peace!

-=- James
Please rate this message - let me know if I helped or not!<HR>If you think it costs a lot to do it right, just wait until you find out how much it costs to do it wrong!
Avoid driving a vehicle taller than you and remember that Professional Driver on Closed Course does not mean your Dumb Ass on a Public Road!
See DeleteFXPFiles

Re: COM/DCOM is now what?

Rolando Cruz19-Jun-07 5:14

Rolando Cruz

19-Jun-07 5:14

I'm adding more information to this thread as to what I want to accomplish.

I need to develop an application which will be monitoring phone lines (Call Center). I want the client application to be notified when a specific line receives a phone call. I think this approach will be more efficient than querying the database every 30 seconds (or so) to see if a new call came through. Simple as that.

Now, does this mean the Web Service does all of this work (line monitoring) or do I also have to create a separate Web Service (DCOM) and end up witha three tiered application? Unsure | :~

(Line monitoring App / Web Service / Client App).

Thanks all for your suggestions. Big Grin | :-D

Rolando

Re: COM/DCOM is now what?

Matthew Faithfull19-Jun-07 7:51

Matthew Faithfull

19-Jun-07 7:51

Just a suggestion but for the Line monitoring I'd write a Windows Service and I'd have it talk to the client application using Sockets. Web technologies are not the best for Push applications where communications are initiated from the server end.
Also that way your client can be remote from the server. A two tier no Web no COM approach if you like.
If you do want a web front end then I'd go three tier with the web server hooking into a non visible version of the client app and for that I probably would use DCOM, or Connection Points or even a named pipe if the Presentation and Middleware layers could be combined. Depends if you'll need a Web Farm Big Grin | :-D

Nothing is exactly what it seems but everything with seems can be unpicked.

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.