|
I'm saying that your debug dll uses the debug version of the C runtime library (and MFC if it uses MFC). Running vcredist_x86.exe will only install the release version of these libraries. So, when you try to load your dll, it will fail. And, for registering the dll, you need to load it. So, yes, the registration will fail.
I have a question: did you run vcredist_x86.exe yourself on the machine ? If no, then maybe it is already installed (then you have to take care if you instal your program on a machine that doesn't have it installed) or you statically link to the libraries.
tom groezer wrote: Is there any way that I could register the debug dll on my test machine?
Why would you do that ? Is there any specific reason for that ? Do you know that distributing debug versions of your program is not allowed ?
Anyway, did you try to statically link agains MFC libraries and the C runtime library ?
For the latter, go into your project settings -> "C/C++" -> "Code Generation" and set "Run-time library" to "Multi-threaded Debug".
By the way, can you check this same setting for the release version of your dll and tell me what it is ?
|
|
|
|
|
Hi all,
I have some problems by printing from my application. The first is that I have to avoid the user choosing page's orientation, I have found one Roger Allen's article (http://www.codeproject.com/printing/customprintdialog.asp[^]) and I think I have understood it right, so it won't be a problem. Then, setting the orientation that every view needs I had the problem that it only worked at the second time, it now works good thanks to this forum and some answers that I found during today. But there is something that I don't understand.
One example says:
if (bRet)
{
DEVMODE *pDevMode = (DEVMODE*)::GlobalLock(m_hDevMode) ;
pDevMode->dmOrientation = DMORIENT_LANDSCAPE ;
::GlobalUnlock(m_hDevMode) ;
}
And the code I have used (found here too) is:
void CMyView::OnPrepareDC(CDC* pDC, CPrintInfo* pInfo)
{
if (pDC->IsPrinting ())
{ DEVMODE* devMode = pInfo->m_pPD->GetDevMode ();
devMode->dmOrientation = DMORIENT_PORTRAIT;
devMode->dmFields |= DM_ORIENTATION;
pDC->ResetDC (devMode);
}
CScrollView::OnPrepareDC(pDC, pInfo);
}
Can someone explain me where the two codes differ and which one is better from the aspect of printing compatibility in different printers? 
And the only problem I can't solve is:
By placing the bitmaps of the elements in my program (is a simulator) I used
void CMyView::OnPrint(CDC* pDC, CPrintInfo* pInfo)
{
pDC->SetMapMode (MM_LOMETRIC);
CDC dcNormMem;
dcNormMem.CreateCompatibleDC (pDC);
BITMAP bmNormTemp;
CBitmap bmNormIn;
bmNormIn.CreateCompatibleBitmap (pDC, 2 * SIGWIDTH, 2 * SIGHEIGHT);
if (pInfo->m_nCurPage == 1)
{
if (bmNormIn.m_hObject != NULL)
bmNormIn.DeleteObject();
bmNormIn.LoadBitmap (IDB_NORMIN);
bmNormIn.GetObject(sizeof(bmNormTemp), &bmNormTemp);
dcNormMem.SelectObject(&bmNormIn);
for (int nIn = 0; nIn < nTotalIn; nIn++)
{ pDC->StretchBlt (
2 * pDoc->m_cmlInputSet[nIn].m_cpInCoord.x,
-50 + (-2 * pDoc->m_cmlInputSet[nIn].m_cpInCoord.y),
2 * bmNormTemp.bmWidth,
-2 * bmNormTemp.bmHeight,
&dcNormMem,
0,
0,
bmNormTemp.bmWidth,
bmNormTemp.bmHeight,
SRCCOPY
);
}
}
}
It was working perfectly in three different printers here in the Firm (one Brother HL-2040 series, one HP DeskJet 930C/932C/935C and one ploter HP Designjet 70). But from one day to the next, the bitmaps didn't come anymore   . It is just drawn a point in the corner (top-left) of the bitmap, and nothing more. Text, lines, self-drawn graphics and so on work good.
I suppose it has something to do with DDB and DIB bitmaps, and now I'm creating the function to transform it but...  Why the hell it was working good during days and suddenly worked no more?  And the thing is pissing me off is that I have tried with the backups of the versions that were working right, but they can not print the Bitmaps as they actually did during days...
Can someone tell me the reason? I will try with the conversion in DIB and the StrechDIBBits but I would like to know what happened.
Thanks.
Sorry for the large of the message and if I have failures (I'm not english speaker)
EDIT: In Bold
--------
M.D.V.
If something has a solution... Why do we have to worry about?. If it has no solution... For what reason do we have to worry about?
|
|
|
|
|
i am trying to port my App from 32 bit to 64 bit. so installed VS2005 on my 64 bit OS and did some setting in configuration manager, i.e x64 and did some project setting Project->Properties->Configuration Properties->General->Common Language runtime support->No Common Language Runtime support.
so it is giving a error
kernel32.lib(KERNEL32.dll) : fatal error LNK1112: module machine type 'IA64' conflicts with target machine type 'x64'
With Regards
RYK
|
|
|
|
|
Check your project settings under 'Configuration Properties / Linker' and check the target machine type is set to 'MachineX64' this will tell the compiler to build for a x64 processor, at the moment it looks like it's set to IA64 (Itanium)
|
|
|
|
|
Yaa machine type is "MachineX64" only
|
|
|
|
|
i have ok ,cancel and check box on dialog .
when i press tab key first ok got focus then cancel got focus.
after that again ok got focus.
then only checkbox got focus what is a problem.
I want the following tab order.
ok->cancel->checkbox->OK....
How to do that
|
|
|
|
|
On the dialog press Ctrl+D for set focus it shows to number of focus for controls
|
|
|
|
|
I set the Number as
OK - 1
Cancel - 2
Checkbox - 3
When i press tab Ok is (default) got focus then cancel got then again ok got focus without dotted rectangle. then checkbox got focus.
what is a pbm.
|
|
|
|
|
prathuraj wrote: ok got focus without dotted rectangle
Disable the "default button" style if you don't want this to happen.
"The difficulty lies, not in the new ideas, but in escaping from the old ones."
-- John Maynard Keyes, 1936
|
|
|
|
|
It sounds like you might be confusing is default with has focus.
"A good athlete is the result of a good and worthy opponent." - David Crow
"To have a respect for ourselves guides our morals; to have deference for others governs our manners." - Laurence Sterne
|
|
|
|
|
If set focus for your control and when press tab key they dont work correct see does a button has default property and then disable it.
|
|
|
|
|
Please do us a favor. Do not use SMS lingo. How long does it take to type "Please" instead of "Plz"? It is stupid of you to do that and sometimes it irritates a lot.
"The difficulty lies, not in the new ideas, but in escaping from the old ones."
-- John Maynard Keyes, 1936
|
|
|
|
|
|
Hi
Does anyone know how to output messages to the debug window in the VC++ IDE.
Thanks in advance.
|
|
|
|
|
Look up the TRACE macro and the OutputDebugString function.
Steve
|
|
|
|
|
ragavan wrote: Does anyone know how to output messages to the debug window in the VC++ IDE.
TRACE0 to TRACE10
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers,
Alok Gupta
VC Forum Q&A :- I/ IV
Support CRY- Child Relief and You
|
|
|
|
|
Hi all,
I am developing an On-Screen keyboard as part of my graduation project, I want the program to send a keystroke event to the active window (when I click on that key using a mouse).
My problem:
When I click on the key image, say G, I get the active window and send the key to it, but the active window (after the click event) is my programs window (it was activated because of the click on the letter G), so how can I get the previous active window or prevent my window from ever being activated???
Please its urgent,
Thank you!!!
And ever has it been that love knows not its own depth until the hour of separation
|
|
|
|
|
any help, please?
And ever has it been that love knows not its own depth until the hour of separation
|
|
|
|
|
Mohammad A Gdeisat wrote: how can I get the previous active window or prevent my window from ever being activated
To answer the last question first, you can't, not without a lot of kludging. As for how to get the previous active window, what happens if there is a popup that the user must respond to, before clicking on the keyboard? This is non-deterministic, and it seems to me that a better way would be to invoke the on-screen keyboard (dialog, exe, whatever) with the HWND of the window that wants the key presses. If a dialog, pass the HWND as a parameter. If an exe, pass the HWND as a string parameter on the command line. That way you will know for sure where to send the click events.
Best wishes,
Hans
|
|
|
|
|
hi i have to run a thread when a button say ok is clicked. if the user press cancel threading should be exited. should not close the dialog. how to do this.
Arise Awake Stop Not Till ur Goal is Reached.
|
|
|
|
|
using System;
using System.Collections.Generic;
using System.ComponentModel;
using System.Data;
using System.Drawing;
using System.Text;
using System.Windows.Forms;
using System.Threading;
namespace testApp
{
public partial class Form1 : Form
{
public Form1()
{
InitializeComponent();
}
Thread newThread;
private void btnOK_Click(object sender, EventArgs e)
{
newThread = new Thread(new ThreadStart(Display));
newThread.IsBackground = true;
newThread.Start();
}
private void Display()
{
MessageBox.Show("threadStarted");
}
private void btnCancel_Click(object sender, EventArgs e)
{
newThread.Abort();
MessageBox.Show("threadstopped");
}
}
}
My small attempt...
|
|
|
|
|
This is managed code, we are on the C++ forum.
|
|
|
|
|
Your code needs to a convertor to convert of managed code to unmanaged code 
|
|
|
|
|
oh what reverse process  
"Success lies not in the result , But in the efforts !!!!!"
Amit Mistry - petlad -Gujarat-India
|
|
|
|
|
Its simple if you know managed programming you can convert it 
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
