|
Shog9 wrote:
Did this just happen out of the blue
It was my mom's old work computer and worked fine(just old) and her boss bought it for a little email and word processing and she got it home and it was dead.
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01010000 01100001 01100100 00100000 01001101 01111001 00100000 01010000 01101111 01110011 01110100 00100000 01000011 01101111 01110101 01101110 01110100
|
|
|
|
|
Well... if it stopped working after being moved, it could be a hardware problem. (yeah, DOS doesn't have problems, but it's DOS...) Check for loose IDE cables, etc. If hardware such as CD drives, etc. was removed, make sure the master/slave settings are still correct. But given that it is an old machine, the likelyhood that the HD is just plain going is not too bad.
--------
I am not a connoisseur. --Shog9 --
|
|
|
|
|
I had to replace an IDE cable but I think the HD is just shot 
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01010000 01100001 01100100 00100000 01001101 01111001 00100000 01010000 01101111 01110011 01110100 00100000 01000011 01101111 01110101 01101110 01110100
|
|
|
|
|
AOA!
As u know that in FTP these days the restart feature(resuming an incomplete download) is very much necessary.
In FTP specification i have read that restart can only be supported when the transfer mode is either BLOCK or COMPRESSED. But IIS supports REST command which is used for restarting an incomplete transfer.
now i want to use IIS 5.0 on the server side and also give restart feature in the client application communicating with IIS, but IIS doesnt support either BLOCK or COMPRESSED MODE (REF:MSDN Jan 2002)
Can Anyone give me a better idea about how to get around this problem,so taht i can give restart feature on the client side ?
Thanx
HOPING FOR A QUICK REPLY
|
|
|
|
|
The E drive in my system is not getting recognised and it is giving the
following message when clicked on the E drive.
The volume does not contain recognied file system.Please make sure that all the required file system drivers and that the volue is not corrupt.
What is the solution to this?How can I recover my data?
ANy help will be appreciated.
Thanku
Be creative
Once your mind is streched by a new idea, it will never regain its original dimension
|
|
|
|
|
I have LAN use WinMe, I want make it Web Server. Please help me!!!
|
|
|
|
|
Have you tried the Apache webserver??? [opens in a new window]
"Isn't that the "write once, debug everwhere" language?" Tom Archer on Java...
|
|
|
|
|
Don't use Apache as it does not support active server pages, and several other things.
I'm not sure if you can run IIS on Win Me (I run it in XP Pro). If not then get an up to date copy of Personal Web Server by Microsoft (probably PWS4 on the Visual Studio 6 J++ Disc).
|
|
|
|
|
I'd avoid PWS like the plague (as does my friend who ran a website of PWS until I demonstrated to him that I could read any file on his HDD, or crash his machine using the correct urls), and if someone just wants to host a simple site, then I doubt the lack of ASP will be problem (Apache supports CGI fine)
--
Help me! I'm turning into a grapefruit!
|
|
|
|
|
I have been working on a Service that is essentially a web server, I have gotten the server code to work in other non-service apps, but when I start the service it doesn't stop or give errors suggesting that it is running but when ever I try to view a page it just gives me a cannot find server error. The account the server is logged in as is Computer Administrator. Can anyone help me?
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01010000 01100001 01100100 00100000 01001101 01111001 00100000 01010000 01101111 01110011 01110100 00100000 01000011 01101111 01110101 01101110 01110100
|
|
|
|
|
A long shot but if your using a proxy server normally insure that you've got the settings setup to bypass the proxy for local addresses.
"Isn't that the "write once, debug everwhere" language?" Tom Archer on Java... 
|
|
|
|
|
Brian Delahunty wrote:
if your using a proxy server
No proxy  thanks for trying though
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01010000 01100001 01100100 00100000 01001101 01111001 00100000 01010000 01101111 01110011 01110100 00100000 01000011 01101111 01110101 01101110 01110100
|
|
|
|
|
Hi,
I have a DDE server running on a Windows 98 plattform.
A DDE client , executed by IIS (internet Information Server), communicAtes with it and everything is OK. Both, client and server uses ddeml. When I try to do the same on WinNT or Windows 2000 I have the following problem: the DDE client , executed by IIS, attempts to communicate with the DDE server but, the server never receives the message. But, when I run this DDE client from the shell (on NT or 2000), again, everything is right. The client sends the message and the server receives it. The DDEspy reports DDE activities when the client is executed from shell, but when it is called for the IIS, DDEspy doesnt report DDE activity, it seems like ther are running in different machines because dont see each other. DDE server andl DDE client are in https/cgi-win, the file system is FAT.
Could anybody help me? Thanks
Valeria león
|
|
|
|
|
I finally got around to connecting my old Win2K Pro PC to the Win2K Server today. I added the old pc to the Active Directory, made a Domain User account for my old logon, hooked them both into the switch and enabled the interfaces. NAT is installed on the external interface, and the server internal interface is configured at 192.168.x.y per the online instructions. I also added a subnet for the internal network to the Active Directory.
The curious part is that when I attempt to join the domain from the client, it reports that the network path couldn't be found, yet I can ping the server without trouble! Even more surprising is that from the client, with no physical connection to the outside world except thru the server, I can surf the 'net without trouble!
Any ideas as to where I should look for the trouble?
|
|
|
|
|
I have experienced this before, but after I let the workstation stay connected to the network for a few hours I was able to join the domain.
I have no good idea why it took so long though.
Did you ever get it to work?
Regards,
--
Dana Holt
Xenos Software
|
|
|
|
|
I had given up for a while, but your reply got me to tinkering with it again. Using NAT on the server is supposed to act as a DHCP server to the local clients, but that's not happening. So I hardwired the IP settings on the client. I also forgot that I had ZoneAlarm onthe old PC, so I disabled it. The wizard for joining a domain still doesn't work (can't find the domain), but the second option to change the domain worked! I can now view the network (but not the shares on the server - more work to be done there), and access the client from the server.
Unfortunately, whenever the local network is enabled on the server, I can no longer find anything on the web - I get a lot of activity on the local net but it never tries the external interface. Back to the drawing board
|
|
|
|
|
Roger Wright wrote:
Using NAT on the server is supposed to act as a DHCP server to the local clients, but that's not happening.
NAT is unrelated to DHCP, so you will have to configure DHCP as another step. That is unless you are using some kind of wizard that does both at the same time behind the scenes.
Roger Wright wrote:
Unfortunately, whenever the local network is enabled on the server, I can no longer find anything on the web - I get a lot of activity on the local net but it never tries the external interface. Back to the drawing board
You should try to do a tracert to a web address to see where the traffic is going. Your routing table should contain a default route that goes out your external (internet) NIC. This will let all addresses not on your internal network go out to the net.
You can use "route print" to see the routing table and "route /?" to get available routing commands.
Isn't networking fun? 
Good luck!
--
Dana Holt
Xenos Software
|
|
|
|
|
Dana Holt wrote:
That is unless you are using some kind of wizard that does both at the same time behind the scenes.
According to the Win2K documentation, that's exactly what NAT is supposed to do. I'm ignoring it for now, since the static settings aren't all that tough to maintain (one client).
Dana Holt wrote:
You should try to do a tracert to a web address to see where the traffic is going.
No need. Like your experience, now that it's been running a while, it's learning where to look as it builds a routing table
Dana Holt wrote:
Isn't networking fun?
Actually, yes it is! That's why I've been doing it for 7 years. But this is my first Win2K server, and as with all networking products, the docs are misleading and often plain wrong. Stumbling around in the dark a lot is part and parcel of networking... 
Thanks for your suggestions!
|
|
|
|
|
Roger Wright wrote:
Actually, yes it is! That's why I've been doing it for 7 years. But this is my first Win2K server, and as with all networking products, the docs are misleading and often plain wrong. Stumbling around in the dark a lot is part and parcel of networking...
Yeah, I used to stumble around in the dark with networking, but now I stumble around in the dark with programming!
Roger Wright wrote:
Thanks for your suggestions!
You're welcome.
--
Dana Holt
Xenos Software
|
|
|
|
|
I am trying to make a Web Server as a NT Service, but for some reason it doesn't work, Do I need to be logged into a special account? I am using XP Home, I tried logging the service in as NT AUTHORITY\NetworkService but it asks me for a password.[EDIT]I was able to type in my user account password but when i tried to start it it game me the following error:
Could not start the [ServiceName] service on Local Computer
Error 5: Access is denied
What does that mean? And what should I do?[/EDIT]
Thanks if you can help
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01110011 01100101 01100101 00100000 01110011 01110100 01110101 01110000 01101001 01100100 00100000 01110000 01100101 01101111 01110000 01101100 01100101
|
|
|
|
|
Create a new service account with permissions appropriate to what your program needs to access, assign it a password, then run it as that user.
|
|
|
|
|
I tried doing that but it just gives me Access Denied.
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
01001001 00100000 01110011 01100101 01100101 00100000 01110011 01110100 01110101 01110000 01101001 01100100 00100000 01110000 01100101 01101111 01110000 01101100 01100101
|
|
|
|
|
For NT AUTHORITY\NetworkService, delete everything in the password box, and it should go.
To let it run under a user account, you need to give the account permissions to log on as a service: Administrative Tools → Local Security Settings → User Rights Assignment → Log on as a Service
|
|
|
|
|
I found out my permissions problem was where the files were located. They were in a private folder. Thanks for the help though
- Matt Newman / Windows XP Activist
-Sonork ID: 100.11179
|
|
|
|
|
I just noticed that I have two copies of the Java 2 runtime console sitting in the system tray. I know it loads at startup, but it normally shows only one icon. I think the second showed up today, as I don't recall seeing it yesterday. The only new apps I've opened today are InterDev and a Sonork conference. It hasn't been booted in a couple of weeks. Has anyone got any idea what might have invoked the second instance?
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
