|
Not sure if you still care, but i was getting the same issue, it ended up being the accessors. I changed my struct to be public as oppossed to internal, the bind started working just fine.
Ryan
|
|
|
|
|
OK, so the Process class in System.Diagnostics is not supported in CF 1.0. Is there any other way in CF 1.0 that I can invoke a process and kill a process as the following lines would achieve in CF 2.0?
System.Diagnostics.Process.Start("iexplore", "http://www.codeproject.org");
and
System.Diagnostics.Process procIe = System.Diagnostics.Process.GetProcessesByName("iexplore")[0];<br />
procIe.Kill();
|
|
|
|
|
You can use the Windows CE CreateProcess API to load a program.
|
|
|
|
|
Excellent stuff! Thanks man, it worked like a charm.
Do you mind if I ask one more questions please?
I assume that killing the process will be done through the TerminateProcess call but I can't seem to figure out how to kill the process that I have just created through CreateProcess. Any pointers here?
Thanks again. You saved me a lot of headaches.
|
|
|
|
|
Public Structure PROCESS_INFORMATION
Public hProcess As IntPtr
Public hThread As IntPtr
Public dwProcessID As UInteger
Public dwThreadID As UInteger
End Structure
Use the hProcess returned from CreateProcess with TerminateProcess.
|
|
|
|
|
Hi, I'm developing an application on PocketPC 2003 2nd edition.
Anyway, I'm looking in my output folder and I've located the executable, the object files and another bunch of object files with the extension of 'sbr'.
These sbr files have the same name, date-time stamp and number-of obj files. (10 obj files means 10 sbr files, etc...)
Does anyone know what these files are for?
|
|
|
|
|
SBR files contain Source BRowsing information. They contribute to a final .BSC file. This file is used when you select Tools/Source Browser in eVC, and also when you select some options from ClassView (e.g. Calls, Called By, References, Base Classes, Derived Classes).
The option to generate .sbr files is under Project/Settings, C/C++ tab, Listing Files category. Check 'Generate Browse Info' to generate the files, or uncheck to stop generating them. To turn generation of the .bsc file on or off, go to the Browse Info tab and check or uncheck 'Build Browse Info File'.
I have noticed the two settings get out of sync sometimes. I think it might be after you're prompted to build browse info when using any of the options I listed in the first paragraph, then the environment subsequently crashes before you save the workspace (which saves changes to the project file). This seems to leave the option to build .sbr files turned on, but loses the .bsc setting.
|
|
|
|
|
Hello everyone,
I am wondering whether there are some samples/tutorials for a beginner to learn how to use C/C++ to read SIM card information on Windows Mobile platform?
thanks in advance,
George
|
|
|
|
|
Hi guys,
does anyone know how to export the phone call log in Windows CE 5.0 (maybe in a XML file)? I've tried with Microsoft.WindowsMobile.Status and Microsoft.WindowsMobile.Telephony without results. Thank you.
Stefano
Stefano
|
|
|
|
|
i always failed with create a IPv6 socket on PPC2003/WM5 . the function like that: socket(AF_INET6, SOCK_DGRAM, IPPROTO_IPV6));
it always return INVALID_SOCKET, and the error code is 10043.
but the IPv4 socket could be success everytimes.
how can i do? whether the IPv6 protocol was not deploy on my device? how to deploy it? 
|
|
|
|
|
Hello,
VS 2005
I have created a Pocket that uses a web service to get data from a SQL server.
I have created the web refererence to the web service.
I am developing a pocket PC in WM 5.0
However, when I click a button on the PDA to get the data I get this error message "Cannot establish a connection to the network"
I am using active syn and have and using the emulator. This has been connected ok.
I have also configured the emulator from File | configure | Network and checked host only network. ( I don't think this makes much difference as the pocket 2003 i developed, it did not make much difference, as it worked if it was checked or not).
The code that causes the error is below:
<br />
Try<br />
Dim ws As New DataIncidents.Service()<br />
Dim ds As New DataSet<br />
<br />
ds = ws.getIncidents()<br />
'Dim cnnStr As String<br />
'cnnStr = ws.getIncidents()<br />
<br />
Me.grdIncidents.DataSource = ds.Tables(0).DefaultView<br />
<br />
Catch ex As Exception<br />
MessageBox.Show(ex.Message)<br />
End Try<br />
If I add the Url line in, it works ok
<br />
Try<br />
Dim ws As New CodeRed.Service()<br />
ws.Url = "http://1.1.1.1/Incidents/Service.asmx" 'Works with this line<br />
Dim ds As New DataSet<br />
<br />
ds = ws.getIncidents()<br />
'Dim cnnStr As String<br />
'cnnStr = ws.getIncidents()<br />
<br />
Me.grdIncidents.DataSource = ds.Tables(0).DefaultView<br />
<br />
Catch ex As Exception<br />
MessageBox.Show(ex.Message)<br />
End Try<br />
Its not good to have this line hard coded in the program as if the location is changed then the problem will no longer function.
Can anyone tell me why I am getting this error.
Many thanks in advance,
Steve
|
|
|
|
|
Maybe when you added the WebReference to your project you used http://localhost/ws/Service.asmx in the url, you should use the ip address of the pc since localhost when executed in the PPC will be the PPC itself
I hope this can help you, but even if it works, since you dont want to hard code the url, this wont be the best way to do it
Maybe you should write the url in a text file and read the url from that file when you execute the project to establish the ws.url property dinamically
Alexei Rodriguez
|
|
|
|
|
Thanks Alexei,
I did something stupid, I forgot to change the web reference properties to my computer IP address.
Steve
|
|
|
|
|
Hi Steve,
I think u r getting this msg becoz u have not cradle ur device . In WM 5.0 u have to cradle ur device to make data connection from Desktop PC or laptop.
Ankur
|
|
|
|
|
Hi.
I'm writing an application with Compact Framework 2.0 SP 1. I want to apply the [STAThread] attribute to the main method, but there seems to be no such attribute. I get offered the MTAThread attribute, but not STAThread. Of course, the compiler doesn't find either. It just seems to be missing in the referenced assemblies (System.dll). I didn't find anything about this problem on the web, so could anybody help me, please? I'm quite desperate. I already reinstalled the CF 2.0, no success. Nobody else seems to have had this problem, ever. Help!!!
Thanks!
rudiman
PS: Sorry for posting this question in the .NET discussion group, too. Now I think it fits better here.
-- modified at 18:58 Saturday 2nd December, 2006
|
|
|
|
|
STAThread is relevant to COM. There are two versions of the COM runtime available to the OEM for Windows CE. One only supports in-process COM objects, with no marshalling: the objects must support the free-threaded model. The other version is a reasonably full DCOM implementation which supports full cross-apartment and cross-process marshalling (in some versions, also cross-machine connections but I think this was dropped in CE 5.0 and later).
Windows Mobile devices include only the simpler in-process, no-marshalling version. Compact Framework therefore doesn't support the more complete version. There's no point having the STAThread attribute because the underlying support isn't there.
|
|
|
|
|
Hi,
I have developed an audio record/playback app using Visual Studio 2005 on i-mate JAM (Windows Mobile 2003 OS). If I record and play back a large single buffer, I get good quality audio. However, if I fragment the buffer into smaller records and use the callback facility provided with waveInOpen(), I get bad quality audio and the audio takes longer to play. This seems to be due to the fact that the overhead in preparing/unpreparing and adding buffers is creating a burden on the system. I find this strange since the micro is a 400Mhz Arm device that has plenty of steam. I have tried using the event-based notification and the windows message notification, even polling the flag in the WAVEHDR structure. I am also using double-buffering.
Without including the actual code, I wondered if anyone else has experienced problems like this using the audio wave function on a Pocket PC ?
|
|
|
|
|
I'm a rookie, and I am learning to write mobile programs using c++ these days.
Yesterday I write a listview, it has the fouction of insert new, modify, and delete items, and when click on the label on the top, items will sort by the column you click.
The problem is, the first item I've inserted into the list refused to attend the arrangement, it is always on the first line. So I hope you guys give me some prompts, thanks.
|
|
|
|
|
Hello,
VS 2005 SQL Server 2005
I have a pocket PC application and have a web service. The pocket PC will connect to the web service and the web service will get the information from the database. This works fine when using the emulator and running from the local host.
Later I will have to deploy the web service and install the solftware on the Pocket PC.
My question is once that has been done, how will the Pocket PC talk to the web service on the internet so that people using the PDA can download there data?
Is it a question of using connecting PDA to the internet and the web reference URL will connect to the web service.
Getting the data from the database is not a problem, only the Pocket PC to the web service.
Many thanks in advance,
Steve
|
|
|
|
|
What do you mean by it works fine in the emulator?
If it works through the emulator, theoretically it will work on the device.
What are you doing to get it to work in the emulator?
Basically you set up the WebService reference in your CF project, and create a WebService object with that url, and work through the exposed web methods.
What's in a sig?
This statement is false.
Build a bridge and get over it. ~ Chris Maunder
|
|
|
|
|
Dear Friends,
Seeking support from porfessionals!
How to write application for Symbol Mobile computer MC1000 using VS.net 2005?. This device works on Win CE and also has an in-built barcode scanner.
What will be the minimum set of tools?
Will it be possibel with VS.net 2005 alone? How to port the application to the device?
Please co-operate as little help is available for beginers
Thanks and regards,
always share to enhance your knowledge...!
|
|
|
|
|
You'll need to download the Symbol SDKs from their website. They have some sample applications to get you on your way. You might have to install the cab on the device if it doesn't come with it.
What's in a sig?
This statement is false.
Build a bridge and get over it. ~ Chris Maunder
|
|
|
|
|
Hi all, I am so hoping that someone can help me out here. I'm writing an application for a terminal[^]. I'm only starting to learn C# and with this terminal and all its sort of a double learning curve for me although I am experienced in C++.
I've had plenty problems which I've managed to iron out one after the other but it seems that I have now reached a dead end where I simply lack the know-how to troubleshoot. When I compile my application it gives no warnings or errors. I can run it on the PC but when I copy it across to the device I get various exceptions. And what really concerns me is that I can't readily reproduce these exceptions. The three exceptions that I mostly get are InvalidProgramException, TypeLoadException and MissingMethodException.
When I comment out lines of code from my application, and these can be real meaningless lines such as MessageBox.Show("1st image loaded"); I get another exception. As I said, these exceptions seem not to be predictable and I never know which one I'm going to get - a bit like a box of chocolate (sorry, bad joke ).
Anyway, I would be very appreciative if someone could give me some advice as to how to get to the bottom of this.
Some background that might be of use:
The device runs Windows CE 4.2 and .NET CF 1.0
I'm using Visual Studio 2005
When creating the project I've selected Visual C# -> Smart Device -> Pocket PC 2003 -> Device Application (1.0)
This is because there is no option for Windows CE 4.2 (only 5.0) and I need to target the CF 1.0
When I create just a basic application with a form and some buttons etc. it does work on my device.
|
|
|
|
|
Hi Dewald,
I think this is because the .net framework in vs2005 you r using is 2.0. Can you try this.
File->New Project->Visual C#->Smart devices->Smart Phone2003->Device Application.
I know you want pocket pc 2003, we can do to it .This is to make sure that vs2005 will take .net framework 1.0.
From Project menu select "Change Target Platform" and select pocket pc 2003 and accept the changes.This will change the target platform to pocket pc but the .net framework will remain the same (ie 1.0). Now u try ur code . If the problem is what i think it will work, other wise sorry man.
Sujith
|
|
|
|
|
Dewald wrote: I can run it on the PC but when I copy it across to the device I get various exceptions
what do you mean by this? running in emulator. How r you copying files to the device? vs2005 can automatically deploy the solution and all the required dlls to the device, and later you can develop a cab project of the solution and then install it on the device if needed.
you can run the program with out manually copying.Check if you are following these steps.
1.From Tools menu select "Connect to Device",select "Pocket pc 2003 device" and press connect buttom. If connection succeeds, ok.
2.Build or Rebuld the solution
3.Then run the project, ensure you have selected "Pocket pc 2003 device" in the combo box for target device.
It may take some time for the first time but after that you can run the project again with less time.By doing this vs2005 will deploy the solution to the device and all the supporting files.
regards
Sujith
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
