|
Sorry but the statement don't return what i expected
Example:
type1 |Id1 | name1...
type1 |Id2 |name2...
because there's a one-many relationship between 2 table
Thanks anyway
|
|
|
|
|
ali33 wrote: Sorry but the statement don't return what i expected
However, it does return what you asked for.
You asked for: | table1.type | name | content | ShortDesc |
The SELECT statement returns: table1.type, table1.name, table2.content, table2.shortDesc
name only exists on table1, content and shortDesc only exist on table2
You are now asking for something with an example output of:
type1 |Id1 | name1...
type1 |Id2 |name2...
This is not possible because name is on table1. Therefore any output row that contains type1 must also contain name1. An output row containing type1 cannot contain name2
ali33 wrote: because there's a one-many relationship between 2 table
Yes, I know that - That is what I gave you. I suspect that either you did not give the full information when you asked the question or you do not understand the implications of the join scenario.
Scottish Developers events:
* .NET debugging, tracing and instrumentation by Duncan Edwards Jones and Code Coverage in .NET by Craig Murphy
* Developer Day Scotland: are you interested in speaking or attending?
My: Website | Blog
|
|
|
|
|
oh!sorry . I have a mistake
When I run your SQL statement the result return is:
type1 |Id1 | name1...
type1 |Id2 |name1... <---(sorry not name2)
But the result I expected is:
type1| Id1 |name1...
type2| id2 |name2...
type3| Id3 |name3....
(each type return only one ID of table 2,for all type)
Sorry for the mistake and can you help me.Thanks
|
|
|
|
|
|
Colin Angus Mackay wrote: Sorry, but I'm still convinced my SQL is correct.
Show me an example of a few rows from each table that should match and tell me for each row in table1 what rows in table2 match to it.
here is an example of some rows from each table:
table1:
|type |name |
----------------------------
| 1 | type1 |
----------------------------
| 2 | type2 |
table2:
|id |type | content | shortDesc |
---------------------------------------------
|1 | 1 | content1 | desc 1 |
|2 | 1 | content2 | desc 2 |
|3 | 2 | content3 | desc3 |
|4 | 2 | content4 | desc4 |
|5 | 1 | content5 | desc5 |
The expected result :
|id | table1.type | name |content | shortDesc |
-------------------------------------------------
| 1 | 1 | type1|content1 | desc1 |
| 3 | 2 | type3|content3 |desc3 |
each type returns only one row.
So now can you help me.If you need,i 'll send you my database and the description more clearly.
Thanks.
|
|
|
|
|
I see now. You need to aggregate the rows in table2 somehow then join it. However there is no natural aggregation that you can use. From your example result set you appear to be taking the lowest id for each type - so that is the colum that needs to be aggregated.
This is the aggregation component:
SELECT MIN(id) AS id, type
FROM table2
GROUP BY type It basically takes the first row for each type and discards the rest.
Now it has to be joined up. The result of the aggregation is added to the previous join to act as a filter.
SELECT table1.type, table1.name, table2.content, table2.shortDesc
FROM table1
INNER JOIN table2 ON table1.type = table2.type
INNER JOIN (SELECT MIN(id) AS id, type
FROM table2
GROUP BY type) AS filterQuery ON filterQuery.id = table2.idThis should now produce the results that you want.
Scottish Developers events:
* .NET debugging, tracing and instrumentation by Duncan Edwards Jones and Code Coverage in .NET by Craig Murphy
* Developer Day Scotland: are you interested in speaking or attending?
My: Website | Blog
|
|
|
|
|
wonderfull!It run perfectly.Thanks Colin Angus Mackay
Best wishes!
|
|
|
|
|
Hi ALL,
How to find 4th working day(any for tht matter) of
any month...If for ex. For June 2006, the 4th working day is
6th June. So, i need to write a PL/SQL(or even SQL Query is also fine) to obtain tht particular day.
Plz do the needful.
Regs,
Jazzy
|
|
|
|
|
|
Hi,
Im trying to get the records from excel sheet to sql server table.
pls help me..getting some errors..
--------------------------------------------
@file_name varchar(255)
as
begin
--select @file_name = DOCUMENT_PATH from DOCUMENT
SELECT @file_name =(' \\ZSW125\AON\BatchProcessing;HDR=YES ')
--Get the excel filename & path to be imported from the reference table
declare @strsql varchar(500)
set @strsql = 'select * from openrowset(''Microsoft.Jet.OLEDB.4.0'',
''Excel 8.0;Database=' + @file_name + ';HDR=YES'', ''"
select * FROM OPENROWSET('Microsoft.Jet.OLEDB.4.0',
'Excel 8.0;Database='\\ZSW125\AON\BatchProcessing;HDR=YES','')
|
|
|
|
|
Hi,
Please anyone can help me for finding a word from a particular field from table in database of SQL.
I have the problem below.
DataTable Name: TempTable
Field name: Dtail
other field name: KeyWords
in the Detail field i have data like:
<--Begin-->
(TenderProcess <> 'Sell' and (State in ('Gujarat') and (ProductName in ('Iso-9002 Consultancy','Audit') or ProductDetails like '% ISO %' or ProductDetails like '% ISO- %' or ProductDetails like '% ISO - %')))
<--End-->
Above is the data in field of Detail Now my Question is:
I want to get words if it found the word 'Product Detail like%%'in any record.
Then for above ex. if I found the word it give
output:ISO,ISO-,ISO -
------------------------------------------------------------
So from above ex. I how I get the output as above.
Please help me.Reply me urgently.
Jesal
OK
|
|
|
|
|
|
I originally developed my application using SQL 2005 Developer Edition, but want to switch to using an XCOPY deployed DB on SQL Express for deployement.
I have successfully copied the database.mdf/ldf files over to me project, and can connect using Data Source=.\SQLExpress and AttachDbFilename=|DataDirectory|\[database].mdf attributes.
The question is, how do I enable CLR integration for my C# SP's?
I've tried executing the following in various places:
sp_configure 'clr enabled', 1
go
reconfigure
go
But I obviously haven't hit the spot because I'm getting the following error when VS deploys my SP library:
Error: starting database upload transaction failed.
Error: Access is denied. (Exception from HRESULT: 0x80070005 (E_ACCESSDENIED))
Any ideas?
|
|
|
|
|
I have an existing SQL table with no constraints. The PartID and DescriptionPartID need to be a composite key. I check and there are currently no duplicates in the existing table. Can I create the key now by doing the following:
UPDATE TABLE Descriptions
PRIMARY KEY (PartID, DescriptionPartID)
Thanks!
|
|
|
|
|
|
As always, Thanks man!
|
|
|
|
|
|
hi guys
how should I load a whole database into a Dataset object.
when loading from a DataAdapter i should use an SQL command. what if i want to load all tabless and reltions and ... in a Dataset?
i want to make a program to load all sort of databases (even without knowing the name of the tables)
thx guys
|
|
|
|
|
hamidreza_buddy wrote: how should I load a whole database into a Dataset object.
Hopefully it is a small database. The last database I worked on was 150Gb when I left the project and growing at roughly 1Gb per week. That would never have fit in a DataSet.
The other question is: Why would you want to?
hamidreza_buddy wrote: when loading from a DataAdapter i should use an SQL command. what if i want to load all tabless and reltions and ... in a Dataset?
Your SqlCommand would consist of:
SELECT * FROM TableA; SELECT * FROM TableB; SELECT * FROM TableC; -- etc...
hamidreza_buddy wrote: i want to make a program to load all sort of databases (even without knowing the name of the tables)
You need to know the names of the tables to put in the SqlCommand. However, you can get this information:
SELECT TABLE_NAME FROM INFORMATION_SCHEMA.TABLES
Scottish Developers events:
* .NET debugging, tracing and instrumentation by Duncan Edwards Jones and Code Coverage in .NET by Craig Murphy
* Developer Day Scotland: are you interested in speaking or attending?
My: Website | Blog
-- modified at 7:02 Friday 30th June, 2006
|
|
|
|
|
thx
we want to make a Data Mining Application.
unfortunately i am a newbee in databases and i dont know the strategies for making such an application.
i really need ur suggestions.
how should i do proccess on databases.
* should i store them in a DataSet or DataReader or what?
as i said it should load every database without knowing name of tables.
waiting for ur strategies.
thx again
|
|
|
|
|
hamidreza_buddy wrote: we want to make a Data Mining Application.
Then leave the data in the database and only ever get what you need at that moment.
Data mining applications usually deal with vast quantities of data, much more than the RAM+swap space of a server, let alone a regular desktop.
Database engines are optimised to do vastly complex "set based" calculations on the data in a database. A DataSet can manage only small fraction of this. DataSets a bebeficial when a small amount of data is repeatedly queried - in this case the performance of the dataset out weighs the round trip cost of performing the query on the server.
Set based operations are those which involve multiple rows of data (a set of data). They are expecially good at joining sets of data together. (If you want to delve really deep into this area they you might like to read up on set theory in mathematics)
hamidreza_buddy wrote: how should i do proccess on databases
Let the database do the work and you pull across only the answers.
hamidreza_buddy wrote: should i store them in a DataSet or DataReader or what?
A DataReader is not a storage mechanism. A DataReader is a mechanism for reading data (hence the name DataReader) from a database.
I, personally, don't like DataSets because they are bulky and I can get better results by creating my own business objects. In .NET 2.0 the typed datasets are supposed to be much better, but I've not yet looked at them.
hamidreza_buddy wrote: i said it should load every database without knowing name of tables.
I already gave you the query you should use to obtain a list of table names. You need to know the name of the table in order to refer to it.
hamidreza_buddy wrote: waiting for ur strategies
I have a pathological hatred for the use or "ur" the word is "your". The same goes for "thx" - THX is a sound quality assurance system that means that if you see a movie in a THX certified theater it will sound exactly as it did in the mixing studio.
On the subject of strategies - There are lots out there, but for a data mining application I don't thing a DataSet will feature much for the mining aspect. Maybe only for helping you bind data to the controls (should you wish to go that route)
Scottish Developers events:
* .NET debugging, tracing and instrumentation by Duncan Edwards Jones and Code Coverage in .NET by Craig Murphy
* Developer Day Scotland: are you interested in speaking or attending?
My: Website | Blog
|
|
|
|
|
Hi,
Please any one can help me for how I find a word from a paricular field from database in SQL
Please reply urgently.
Regards,
Jesal Rana
OK
|
|
|
|
|
select a from table where a like '%word%'
Or set up a full text index and use the CONTAINS predicate.
|
|
|
|
|
Hi My one column field is something like
1.1.1.1
please note it can be any number between 1 to 1000 before each .
e.g. upto 1000.1000.1000.1000
1. my question is how can i extract,
anything that starts before second '.' and insert into another column with in a same record.
2. how can i extract any number that starts after second '.' and before third '.'
please provide me clear direction
cheers.
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
