|
Mike Nordell wrote:
"If you rule out problems created by your code, perhaps there's a Dinkum library error that has been fixed?"
Thanks for the link! I didn't know about this.
Mike Nordell wrote:
"Not that I've ever seen an error like this. My first guess is a bug in your code, overwriting something it shouldn't."
Yes, I think that's what it is. I commented out a completely unrelated piece of code:
aperturePtrsIterator it;
for (it=aperturePtrs.begin(); it<aperturePtrs.end(); it++)
{
(*it)->bHaveOutputDCodeDef=false;
}
where aperturePtrs is a class member defined:
vector<CODBAperture *> aperturePtrs;
and aperturePtrsIterator is defined:
typedef std::vector<CODBAperture *>::iterator aperturePtrsIterator;
There is probably something I'm doing wrong here. I'm trying to store pointers to CODBAperture objects that are stored somewhere else in a linked list type of thing. Does (*it) create an instance of CODBAperture?
Cathy
Life's uncertain, have dessert first!
|
|
|
|
|
Sorry for the late response.
Cathy wrote:
I commented out a completely unrelated piece of code:
That piece of code is definitely not unrelated, and it's also completely wrong.
You shall never, I repeat never, compare an iterator to any other iterator than for equality or inequality. Even that a vector is to be contigous, there is AFAIK nothing stating that a vector iterator has to be implemented as a pointer to the contents, why something like:
if (it < coll.end())
is incorrect code. It should be
if (it != coll.end())
I'm trying to store pointers to CODBAperture objects that are stored somewhere else in a linked list type of thing. Does (*it) create an instance of CODBAperture?
If your vector only contains pointers to CODBAperture objects? No.
But be aware that keeping pointers to objects in two collections if the one owning the object can delete it during the lifetime of the second referee is obviously inherently dangerous.
|
|
|
|
|
Mike Nordell wrote:
You shall never, I repeat never, compare an iterator to any other iterator than for equality or inequality. Even that a vector is to be contigous, there is AFAIK nothing stating that a vector iterator has to be implemented as a pointer to the contents, why something like:
if (it < coll.end())
is incorrect code. It should be
if (it != coll.end())
Thanks for pointing that out! I didn't notice that one at all.
Mike Nordell wrote:
But be aware that keeping pointers to objects in two collections if the one owning the object can delete it during the lifetime of the second referee is obviously inherently dangerous.
Yes, this was the problem. I was storing a pointer that was no longer valid.
Cathy
Life's uncertain, have dessert first!
|
|
|
|
|
Hi,
Wonder if someone could point me in the right direction, What i want to do is seperate all the User Interface Classes from my processing classes, without using any DLLs.
I envisage doing this through having two projects in my workspace. Does anyone know how i can achieve this. Had a look at Project Wizzard's "Utility Projects", but it doesn't do any build setting to compile.
Cheers
Rich
|
|
|
|
|
It's simple! If you start from scratch, do the following:- Create an empty workspace.
- Create the GUI project. Make it a subproject by ticking on the "part of current workspace" (or something like that) on creation time.
- Ditto for the "processing" project. This sould be of type "static library".
- Go to the settings for the GUI project, look for the "include directories" edit box and add
..\processingProject or whatever the subdirectory for the processing project is named.
- Go to Project -> Dependencies and make the GUI project dependent on the processing one.
- Shake well and serve chilled.
Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
|
|
|
|
|
Joaquín M López Muñoz wrote:
Shake well and serve chilled.
LOL
I vote pro drink ![Beer | [beer]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/beer.gif)
|
|
|
|
|
Sounds straight forward but i am hitting problems! During links, tried playing around with the /nodefaultlib option, but no luck. Any ideas?
msvcrt.lib(MSVCRT.dll) : error LNK2005: _time already defined in libcmt.lib(time.obj)
msvcrt.lib(MSVCRT.dll) : error LNK2005: __setmbcp already defined in libcmt.lib(mbctype.obj)
LINK : warning LNK4098: defaultlib "mfc42.lib" conflicts with use of other libs; use /NODEFAULTLIB:library
LINK : warning LNK4098: defaultlib "mfcs42.lib" conflicts with use of other libs; use /NODEFAULTLIB:library
LINK : warning LNK4098: defaultlib "msvcrt.lib" conflicts with use of other libs; use /NODEFAULTLIB:library
Release/pm.exe : fatal error LNK1169: one or more multiply defined symbols found
Error executing link.exe.
pm.exe - 3 error(s), 3 warning(s)
|
|
|
|
|
You have one project setup to build for static linking and the other setup to build for runtime linking.
Tim Smith
I know what you're thinking punk, you're thinking did he spell check this document? Well, to tell you the truth I kinda forgot myself in all this excitement. But being this here's CodeProject, the most powerful forums in the world and would blow your head clean off, you've got to ask yourself one question, Do I feel lucky? Well do ya punk?
|
|
|
|
|
Is there an easy way to have the CSliderCtl behave the same way when you use the arrow keys as it does when you click/drag it with the mouse? It moves the slider up and down, but how do I trap the message, the CSliderCtl only sends NM_OUTOFMEMORY, NM_RELEASEDCAPTURE, and NM_CUSTOMDRAW. I want the arrow keys to perform the same tasks I do when I handle the M_RELEASEDCAPTURE message.
Ken Goguen
|
|
|
|
|
I haven't tried this myself, but I think it should work:- Derive
CMySliderCtrl from CSliderCtrl.
- add a member variable
int m_pos and handlers for WM_KEYDOWN and WM_KEYUP.
- in
OnKeyDown, store the current position in m_pos. In OnKeyUp, compare the position with the one you stored. If they're different, issue the appropriate NM_RELEASEDCAPTURE with WM_NOTIFY. Check for repeat counts (holding the key pressed) in OnKeyDown for improved results.
Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
|
|
|
|
|
Seems to work well.
Thanks,
-kg
Ken Goguen
|
|
|
|
|
I am processing data in a worker thread and calling a member function (of Doc) which performs a file write.
I pass a pointer to CMyAppDoc into the worker thread which I use to access a member function of CMyAppDoc when the thread is created.
The worker thread processes data and stores and stores data in CMyAppDoc using the Doc pointer
pDoc->StorageArray[i] = something;
A little later in this thread when the processing is finished I try to write the data to a file. The function and data are members of CMyAppDoc but the file pointer (myFileFmt) is created within the worker thread. The call is made in the worker thread
pDoc->WriteFmtL15Data(myFileFmt);
The WriteFmtL15 Data does somthing like:
void CLOPCDoc::WriteFmtL15Data(CFile &file)
{
CString sL1("L1"), sL2("L2"), sL3("L3"), sL4("L4"), sL5("L5");
CString tmp("");
for(int a=0; a<=31; a++)
{
tmp.Format(" %d", vecL14[a]);
sL1 += tmp;
}
sL1 += ('\n');
file.Write(sL1, strlen(sL1));
}
When it enters the file writing routine it raises an error:
Unhandled exception in MyApp.exe(MFC42D.DLL): 0xC0000005: Access Violation.
and if I debug the error it bring me to a line in WINCORE.CPP
lResult = pWnd->WindowProc(nMsg, wParam, lParam);
???????????????
|
|
|
|
|
I don't think the problem has to do with myFileFmt being created in the worker thread. To rule this out, you can try (just for the sake of testing) using in WriteFmtL15Data a global CFile object created in the main thread (say in InitInstance), instead of the one passed in.
Joaquín M López Muñoz
Telefónica, Investigación y Desarrollo
|
|
|
|
|
Hi,
if you know the answer to this one you can probably jump to the last paragraph, others might want to know more...
I have run into a problem. I wanted to create an ActiveX control based on an existing one. So I took the entire Visual Studio project and copied it. Renamed all files (and names therein). And I modifed and registered the new control under the new name. No problem so far. Alas, I then noticed that the original control was gone. As soon as I registered the old or new control the other one was gone. I figured that the UUID was the problem here, (looks like this)
//const GUID CDECL BASED_CODE _tlid =
//{ 0x6fe77b28, 0x50c9, 0x4f53, { 0xb4, 0xe7, 0x13, 0x85, 0xe1, 0x4, 0x4b, 0x76 } };
These IDs are numerous in each project and in at least four different files, and sometimes they appear to refer to each other. I started to make new codes with GUIDGEN.EXE, but gave up because of the cross-referencing which was a bit obscure.
My next idea was to create a new empty activeX project and copy all the IDs. The control registered nicely after a premature attempts, it does not delete the the other control, but fails to load into the test container.
So, I have to create new IDs somehow. Either I made a mistake (despite double-checking) when copying from the empty project, or the IDs themselves contain implicit information about the control. If the ids contain no such info nor checksums and such stuff the best thing would be to back up to the previous working version and just change a single digit. Is this possible? Or, perhaps another problem is that my faulty attemps have left garbage in the registry (2K) which perhaps needs to be cleaned.
I would be truly gratful for any help.
Cheers,
Adam
_____________________________________
Action without thought is not action
Action without emotion is not life
|
|
|
|
|
Perhaps the easiest solution would be to create a new ActiveX Control project from scratch, then add in all the files from your old project and tie them in to your new ActiveX "wrapper".
(I have had to do this myself)
------------------------
Derek Waters
derek@lj-oz.com
|
|
|
|
|
Hio.. i am trying to store a CObArray into my document class.. but not having any luck.. I have another class i have written myself which serializes a CObArray into a file, but i can't seem to figure out the correct way to do it in a CDocument as it is not possible to put ar >> CObArrayVar ..
any suggestions? for example, if i want a user to enter in any number of strings, and be able to save it to a document and open it back up, how would i handle the dynamic size?
thanks for any suggestions!
-dz
|
|
|
|
|
See "Serializing a homogenous collection class" in this article.
/ravi
"There is always one more bug..."
http://www.ravib.com
ravib@ravib.com
|
|
|
|
|
i hate to seem dense.. BUT... 
ok, i should serialize the signature, then the version, then i should store the number of items in the CObArray.. then i should store each of the CObjects? you say serialize the object, then serialize the data members.. i should be able to just serialize my CObject derived class right? i shouldn't have to specify every data member of it right?
oh ya, im assuming i should do a for loop to CObArray.GetSize() to store each item?
thanks for all of your help lately!
-dz
|
|
|
|
|
dazinith wrote:
i should be able to just serialize my CObject derived class right? i shouldn't have to specify every data member of it right?
Yes, you should serialize the signature, version, size of the CObArray, and each object in the CObArray. The objects in turn should serialize themselves by writing out their signature, version and data members.
Part 3 of my tutorial is crying out for code examples. I haven't had the time to post them but definitely plan to do this when I have some spare time.
/ravi
"There is always one more bug..."
http://www.ravib.com
ravib@ravib.com
|
|
|
|
|
well, i got it to work where i store each of the members of the class in the loop, but i would much rather just store the CObject derived object directly.. the problem is that if i try to do:
ar << objMyObject
it tells me there is nothing that can handle the << . My CObject derived class has the serialization function. I have tried casting it to a CObject and storing that, but i think im storing the pointer value and not the actual data.. i think i got it to save, but when i load it gives errors for unexpected file format.. i have left out the versioning just for simplicity.. i just need to know how to load and store all of the values from the m_oaStringList (which is of CObArray type)
if (ar.IsStoring())
{
ar << m_oaStringList.GetSize(); // store the size of the array
// loop through and store all data members
for (i = 0; i < m_oaStringList.GetSize(); i++)
{
CObject* pObj = m_oaStringList.GetAt(i);
ar << (&pObj);
}
}
else // is loading
{
int n; // load the size of the array
ar >> n;
// loop through and load all data members
for (i = 0; i < n; i++)
{
CObject* pObj = (CObject*)new CTestObj();
ar >> pObj;
}
}
thanks!
-dz
|
|
|
|
|
You're close. There are 2 changes I suggest you make:
- Write a
serialize (CArchive& ar) method for your object. The method will simply serialize the data members of the object (using the << and >> operators). Call this serialize() method instead of doing "ar << pObj" or "ar >≶ pObj". In other words, do "pObj->serialize (ar);" instead.
- When deserializing (reading in), you should set the size of the CObArray before adding members to it. Then, as you deserialize each object (again by simply calling its
serialize() method to read itself in), put the object in the CObArray's appropriate slot.
/ravi
"There is always one more bug..."
http://www.ravib.com
ravib@ravib.com
|
|
|
|
|
thank you so much for your help today.. i got the code to do what i want.. and thats be able to store and load a document based off of CObArray.. I just did a simple object, but now i feel i could use it for a much larger object.. here is the finished code if you want to use it to update that article.. again thanks for the help!
p.s. if you do use this as an example you might want to change the var's as m_oaStringList seems like a CStringArray, but is a CObArray.. thanks so much!
void CDocumentTestDoc::Serialize(CArchive& ar)
{
int i;
if (ar.IsStoring())
{
// store the size of the array
int n = m_oaStringList.GetSize();
ar << n;
// loop through and store all data members
for (i = 0; i < m_oaStringList.GetSize(); i++)
{
CTestObj* pObj = (CTestObj*)m_oaStringList.GetAt(i);
pObj->Serialize(ar);
}
}
else // is loading
{
// load the size of the array
int n;
ar >> n;
m_oaStringList.SetSize(n);
// loop through and load all data members
for (i = 0; i < n; i++)
{
CTestObj* pObj = new CTestObj();
pObj->Serialize(ar);
m_oaStringList.SetAt(i,pObj);
}
}
}
-dz
|
|
|
|
|
dazinith wrote:
i got the code to do what i want..
Excellent!! Glad I could be of help! Now I really must get off my posterior and update the article!
/ravi
"There is always one more bug..."
http://www.ravib.com
ravib@ravib.com
|
|
|
|
|
is it possible to use these same ideas to store a CObArray inside of another CObArray? for example, if the CObArray im serializing now contains a data variable which is also a CObArray with its own serialize function, when the top level CObArray gets serialized does this in turn call the serialization of the lower object?
-dz
|
|
|
|
|
Absolutely!
The top level CObArray doesn't know how to serialize its content objects. It just tells each one "go serialize yourself". If the content object is another CObArray, it goes about serializing itself by storing its signature, version, item count, and then asks each of its objects to serialize themselves.
/ravi
"There is always one more bug..."
http://www.ravib.com
ravib@ravib.com
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
