|
Hello Abhijeet
Your description of the problem is perhaps not complete. Are you devleoping a Web or a Windows Application, what method are you using to display and load the .chm file? Assuming that you are working on a Windows application and you are using the Helpprovider extender provider to load the display the .chm file, in the design mode, you have to specify then name of the chm file which you want to load when the user presses the F1 button in the 'HelpNamespce' property of the extender provider. There is a browse button against that property which allows you to specify the path of your chm file. If you use the browse button, it hard codes the physical file of the path in that property, so that when you run the application from the VS IDE, it works fine, but if you build and deploy the project, it would search for the chm file at the same physical path as that on your development machine, and hence doesnt find it.
The Solution:
In development environment/machine, remove the physical path of the chm file from the HelpNamespace property of the help provider and leave only the name of the file along with the .chm extension. Now copy the .chm file in the folder [ProjectName]\Bin\Debug (The same folder where the .exe file of your project is). Run and verify that the chm file is still being located. When deploying, make sure that the exe file of your project and the chm file are in the same folder. This should solve the problem.
|
|
|
|
|
Hi
your correct I'm using Windows application. The Solution you've mentioned above works fine. Can .chm file be the part of Deployment project so that whenever i build and install it will be there? at present i'm not able to add .chm to deployment.
I'm using System.Diagnostics.Process to display the Help.
Thanks for ur quick reply..
Warm Regards
Abhijeet Ballal
|
|
|
|
|
hi
iam working on a c# application that captures video from web cam. I need to compress the video file before saving using c# code independent of the compressors of web cam as different webcams have different compressors ,can anyone help in solving this problem so that the video file can be compressed for any web cam used.
thanks
 ramya
|
|
|
|
|
Hi,
I am working on a web application where i need to use Response.Flush to display the status of progress. But, after using Response.Flush, i am unable to use anything with Response i.e Response.Content-Type, Response.Redirect etc, all give error that read "Server cannot set content type after HTTP headers have been sent".
Can someone suggest any alternative solution to show progress in status bar other than using Response.Flush? or how can i make response.redirect and response.content-type work after using response.flush?
Thanks
|
|
|
|
|
|
I have a panel on my form and what I want is when the user double clicks the panel, it will load the date and time properties window (Microsoft WIndows Date and time screen) So the user can change the time and date. BUT I would like (if possible) The application to load as a fixed dialog screen so you would have to use it or you could not do anything else. ANy suggestions how I could do this?
In the end we're all just the same
|
|
|
|
|
Something like:
<br />
Process oProc = new Process();<br />
oProc.StartInfo.FileName = "control.exe";<br />
oProc.StartInfo.Arguments = "date/time";<br />
oProc.Start();<br />
oProc.WaitForExit();<br />
You can launch date/time property window using:
"control.exe timedate.cpl"
or
"control.exe date/time"
or
"rundll32.exe shell32.dll,Control_RunDLL timedate.cpl"
|
|
|
|
|
Hi all,
I have two rich text boxes that I need to join together for example
........RichTextbox1 + Richtextbox2 = Richtextbox1(after join)
Line1........a................b..................ab
Line2........c................D..................CD
Line3........e................f..................ef
I can spin through it line by line but there are over 3000 and this is causing the application to crash 
I have tried using Append, insert, += within the loop through the lines but it is still unstable !
Any help would be most appreciated !!!!
Thanks in advance
John
-- modified at 4:10 Tuesday 4th April, 2006
|
|
|
|
|
You could try looping through them line by line (like you are already doing) and putting the text into a StringBuilder. This should be by far faster and the controls are not stressed. After everything is finished set the complete text to your richtextbox: myRichTextBox.Text = myStringBuilder.ToString():
|
|
|
|
|
How about define a variable to store the text in two RichTextBox？
Then using += to join them.
after join all lines. then put result text to RichTextBox1.
--
hoping it help you.
|
|
|
|
|
Hi all
Thanks for the response ! but i am still getting the issue
I am currently using :
------------------------------------
System.Text.StringBuilder sb = new System.Text.StringBuilder();
for (int i = 0; i < RichText.Lines.Length; i++)
{
sb.Append(RichText.Lines[i] + tempData);
}
RichText.AppendText(Convert.ToString(sb));
---------------------------------------
This will run for a random number of rows before crashing
i am going through 6000 + lines (do you think this is an issue).
I have tried a few variations on this theme as stated in previous posts. i have also tried textbox instead of a richtextbox. I AM ALL OUT OF IDEAS !!!!
any help would be fab
Thanks
|
|
|
|
|
Have you tried something like
rtb = RichTextBox
//if you need the styles to copy also
rtb3.RTF = rtb1.RTF + rtb2.RTF
//if you don't care about the styles
rbt3.Text = rtb1.Text + rtb2.Text
-Richard
|
|
|
|
|
Thanks for the reply !
Will that not just put rtb2 at the bottom of rtb1 ?
What i need is to append the first line of rtb2 to the first line of rtb1 and the sencond line of rtb2 on the second line of rtb1 and so on.....
|
|
|
|
|
Sorry I didn't read you org post carefully enough.
In that case your best bet is the solution provided above by Robert Rohde I think.
-Richard
|
|
|
|
|
Can some one point me in the right direction on how to implement a smal C++ console app in Csharp.
|
|
|
|
|
For clarification:
1. Do you want to use or implement the C++ console app in C#? (Whereas the second doesn't make any sense to me, cause how should i implement a C++ app with C#)
2. What exactly do you mean by use (if that's what you want)?
www.troschuetz.de
|
|
|
|
|
I'm implementing two diferrent code parts.
I'ts a chessplay. I have the functionality in C++. Now a want to add a GUI to the game. So a want to use functions in C++ from C#
|
|
|
|
|
I think you'll have to pinvoke the functions. But I'm not sure if it's possible when there inside a console app. Didn't use it much besides calling some win32 apis.
www.troschuetz.de
|
|
|
|
|
You can attach your own streams to a System.Diagnostics.Process class object to send/recieve console style input.
|
|
|
|
|
|
Maybe you want to make your own DLL with the console functions, and methods.
|
|
|
|
|
hi
i want to download Directx .0 SDK For Framework 1.0 from this link :
http://www.microsoft.com/downloads/details.aspx?FamilyID=edb98ffa-a59c-4c23-9b92-ba304f188314&DisplayLang=en
but when i follow steps for download,microsoft say to me :
Validation Incomplete: Windows Must Be Activated
how to download it without this problem ?
or please give me another links to download dx90 sdk and documention and ...
thanks
|
|
|
|
|
hdv212 wrote: how to download it without this problem ?
Buy Windows XP 
|
|
|
|
|
|
I cant figure out when to use base classes and when to use common
methods that just take in different parameters and do the same task,
instead of having 1 method for each of my objects.
ok so in my data layer (3-tier enterprise web solution), I have
4 classes: mygets, myinserts, mydeletes, myupdates.
Each of these hit the database and do the appropriate work for
7 of my tables: tb1, tb2, tb3 ... tb7
mygets has these methods gettb1(tb1key), getAlltb1, gettb2(tb2key), getAlltb2 ... tb7
each returns a dataset
myinserts takes all fields for tables (as sql parameters) and adds them:
addtb1(field1, field2 ... ), addtb2(field1, field2, ... ) etc.
same for myupdates and mydeletes.
whats the best way to structure having to code the least, and have it
consistent: base classes which have the common functions for each of these 4?
or static methods that basically take in different parameters and get the same
stuff done?
which is more efficient?
related question: are base classes just a better "location" to put common
methods that can be used by a lot of classes? classes that derive from them?
thanks
M
-- modified at 2:09 Tuesday 4th April, 2006
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
