|
After doing some research (and using Reflector to poke around in the ClientRectangle property) I can see that there is no simple way to do what I want. I came up with a solution:
public new Rectangle ClientRectangle
{
get
{
Rectangle _clientRectangle = base.ClientRectangle;
foreach (Control currentControl in Controls)
{
switch (currentControl.Dock)
{
case DockStyle.Top:
_clientRectangle.Height -= currentControl.Height;
_clientRectangle.Offset(0, currentControl.Height);
break;
case DockStyle.Bottom:
_clientRectangle.Height -= currentControl.Height;
break;
case DockStyle.Left:
_clientRectangle.Width -= currentControl.Width;
_clientRectangle.Offset(currentControl.Width, 0);
break;
case DockStyle.Right:
_clientRectangle.Width -= currentControl.Width;
break;
}
}
return _clientRectangle;
}
}
However, iterating over every control in the forms Contols collection every time you want to grab ClientRectangle is slow. Anyone have any tips on optimizing this?
-Mike.
|
|
|
|
|
I suppose you could add a panel, set its dock to fill and use its ClientRectangle. You would need to make sure the panel is infront of any other docked controls.
|
|
|
|
|
I am using a treeview/listview combination. I want to use the treeview selection to populate what appears in the listview. As an additional note, the treeview will either display a list of companies or trades based on a radio button control.
Does anyone have a suggestion as to which event I should use to accomplish this? Or a suggestion on an alternative approach. As a temporary solution - I added a Load button but would prefer to control through the treeview.
I have tried the following events;
AfterSelect event - the event appears to kickoff twice - once for the item that it is deselecting and one for the item it is selecting. When switching radio buttons, the event seems to run for each previous item in the list.
BeforeSelect event - does not know which node is selected
Click event - shows me the the last node selected
Any assistance is appreciated - Thank you in advance.
|
|
|
|
|
I have a custom textbox control and I am having trouble simulating a keypress event
consoleControl1.Focus();<br />
consoleControl1.Update();<br />
SendKeys.Send("{ENTER}");
does not work.
[I even tried adding a method like consoleControl1.Enter() with SendKeys.Send("{ENTER}"); in there but nada]
thanks in advanced
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
-- modified at 13:55 Tuesday 7th March, 2006
|
|
|
|
|
Is your custom textbox control a user control with a textbox on it? In that case, you might need to focus the textbox rather than the custom control.
If everything is working there, you might try sending some key other than enter just to test it. If only the enter key is failing, it might be due to the textbox having some single-line limitation, perhaps? or maybe some special handling for the enter key...
Tech, life, family, faith: Give me a visit.
I'm currently blogging about: Lent Revisited
The apostle Paul, modernly speaking: Epistles of Paul
Judah Himango
|
|
|
|
|
Judah Himango wrote: If everything is working there, you might try sending some key other than enter just to test it. If only the enter key is failing, it might be due to the textbox having some single-line limitation, perhaps? or maybe some special handling for the enter key...
Ok, I have:
internal class ConsoleTextBox : TextBox
which gets called by my control
<br />
public class ConsoleControl : System.Windows.Forms.UserControl<br />
{<br />
private UIIronTextBox.ConsoleTextBox consoleTextBox;<br />
....<br />
I've tried
SendKeys.Send("{ADD}");
SendKeys.Send("{ENTER}"); [both do not work]
from both classes
I can easily consoleTextBox.WriteText("\r\n");
or this.AddText("\r\n");
but I actually want to simulate the KeyPress event.
I am just confused on how to do that.
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
-- modified at 18:15 Tuesday 7th March, 2006
|
|
|
|
|
So, have you tried the following?
consoleControl1.consoleTextBox.Focus();
SendKeys(...);
Keep in mind that some anti-virus software will intercept the SendKeys, seeing as how some hooks are involved in the sending of the keys, some a/v software will intercept the call and tell the user some risky behavior is going on. If that bothers you, you might be better off using the Win32 SendMessage.
Also, if you're just trying to simulate the KeyPressed event, couldn't you just code up method that calls OnKeyPressed override (which will fire the KeyPressed event)?
|
|
|
|
|
Judah Himango wrote: Also, if you're just trying to simulate the KeyPressed event, couldn't you just code up method that calls OnKeyPressed override (which will fire the KeyPressed event)?
That is what I am asking. I am not sure how to go about doing it.
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
|
|
|
|
|
Simply calling the OnKeyPress protected method inside the TextBox derivative control will fire the KeyPress event in the underlying control. So, to raise the KeyPress event:
public void ManuallyRaiseKeyPress(...)
{
base.OnKeyPress(...);
}
myTextBoxDerivative.ManuallyRaiseKeyPress(...);
Keep in mind that this will NOT insert text into the control. The KeyPress event responds to a key being pressed on the keyboard. The text box does not insert text into the control when it receives the KeyPress event; on the contrary, the KeyPress event responds to text being inserted via the keyboard. If you're still sure that's what you want, the above solution should work for you.
Now, if you're trying to insert text into the textbox programmatically, and textBox.Text = ... won't work for you, then you're going to need to use either SendKeys or SendMessage (win32) to the textbox. SendKeys should work so long as the actual textbox is focused (in your original code posting, you were focusing the user control, not the textbox).
|
|
|
|
|
Does anyone know why MS hasn't implemented these and do they plan to?
Also does anyone know of a way to parse C# code into a CodeCompileUnit, or is the only option to use this not implemented method?
BTW, I don't particularly want to have to write a complete parser for C# or VB.NET!
Regards Ed
|
|
|
|
|
Hi everybody!
Does anyone know how to monitor lan activity in .NET using C#? I thought PerformanceCounter was the right way but now I'm not sure. I need something like Task Manager. Thank you!
|
|
|
|
|
That's probably not a job for the .NET framework. AFAIK, you're going to need to make lots of Win32 calls to make that work; you might as well be writing in a native language or C++/CLI.
Tech, life, family, faith: Give me a visit.
I'm currently blogging about: Lent Revisited
The apostle Paul, modernly speaking
Judah Himango
|
|
|
|
|
I know that i cannot read lets say 80mb big file into a textbox, first i takes too long and second it would take alot of memory.
I need to find a approach to read sections from file to textbox and when user scrolls down or push page down it read another section...
Is that a good approach to problem or do anyone have another approach to read large textfiles fast...
<Im really impressed what Christan Ghisler done with his lister, its really fast.>)
Im open for ideas how to solve this problem...
-- modified at 12:13 Tuesday 7th March, 2006
|
|
|
|
|
I have created a simple program that does something similar. It will read a file in chunks using a reader and provides forward only navigation.
If you send me an email I can send you the source code (C# vs2005)
andrew at pmall dot com
|
|
|
|
|
Sent you a mail 
|
|
|
|
|
You basically have two options:
1. Open the file as a textfile, but then you can only read it sequentially.
2. Open the file as a binary file, then you have to detect the line breaks yourself, and convert the bytes to text using the Encoding class, but you can read from any part of the file.
---
b { font-weight: normal; }
|
|
|
|
|
I dont quite get what you are saying here..
In this case it would be possible to read chunks from whereever you like in file...or did i dont understand what you saying?
<code>
FileStream fs=new FileStream(fileName, FileMode.Open, FileAccess.ReadWrite,
FileShare.None, 8192 ); //we use the default buffer
StringBuilder result=new StringBuilder(8192);
byte[] buffer=new byte[8192];
int count=fs.Read(buffer,0,8192); //reading a block from the file, here we could start for example on 2000 instead of pos 0 //(fs.Read(buffer,2000,8192))
ASCIIEncoding encoding=new ASCIIEncoding();
while (count!=0) //stop when Read returns 0
{
result.Append(encoding.GetString(buffer));
count=fs.Read(buffer,0,8192);
}
fs.Seek(0, SeekOrigin.Begin);
</code>
|
|
|
|
|
Yes, you can use the Seek method to go to any position in the file.
Note: There is an error in this comment in the code:
//reading a block from the file, here we could start for example on 2000 instead of pos 0 //(fs.Read(buffer,2000,8192))
Using that call would result in an error message. As the size of the array is 8192 bytes, you can't read 8192 bytes and put them in the array from index 2000. Between index 2000 and the end of the array there is only room for 6192 bytes.
---
b { font-weight: normal; }
|
|
|
|
|
You are so right, little mistake from my side 
|
|
|
|
|
System.IO.File in .Net 2.0 is really fast and has some new methods like ReadAllText() and ReadAllLines(). Why not some custom methods for your app?
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
|
|
|
|
|
How do you mean you should do then?
|
|
|
|
|
I was thinking of using ReadAllText() within an asynchronous method. Just read chunks of the 80mb from a temp file using ReadAllText(), when the user nears the end point create, then read another chunk into the textbox.AppendText(tempfile.ReadAllText()).
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
|
|
|
|
|
ReadAllText() is synchronous method, when you try to read a large text file, your application will hang or slow down ... better to use asynchronous medthod !!!
|
|
|
|
|
hackerhcm wrote: ReadAllText() is synchronous method, when you try to read a large text file, your application will hang or slow down ... better to use asynchronous medthod !!!
Of course, I was thinking of using ReadAllText() within the asynchronous medthod. Just read chunks of the 80mb from a temp file or something using ReadAllText(), when the user nears the end point create then read another chunk.
Later, JoeSox
"Football is a game of cliches, and I believe in every one of them." -Vincent Lombardi
CPMCv1.0 ↔ humanaiproject.org ↔ Last.fm
|
|
|
|
|
How to get the real Length of UTF8 String?
Thanks
Nothing
-- modified at 11:58 Tuesday 7th March, 2006
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
