|
I close it believe me before reading from read end of pipe, but this will not affect even windows console app which reads lines from console with fgets(). Only passing to console stdin thru write pipe \032\n induce console app to quit from fgets() returning NULL as eof was encountered! You can even leave pipe unclosed!
But with cygwin compiled application niether works!? as its compiled fgets() interprets \032\n as a string!
9ine
|
|
|
|
|
Try sending it \004. Linux shells (which cygwin is based on) sometimes interpret Ctrl+D as an EOF character.
Ryan "Punctuality is only a virtue for those who aren't smart enough to think of good excuses for being late" John Nichol "Point Of Impact"
|
|
|
|
|
useless!
fgets() compiled under cygwin interprets it as usual string!
9ine
|
|
|
|
|
I am getting an assert occasionally in the following
void CFile::Write(const void* lpBuf, UINT nCount)
{
ASSERT_VALID(this);
ASSERT(m_hFile != (UINT)hFileNull);
Basically This call is from another thread (worker thread)(thread B) to write to a file and this thread does not initially create the File Object . The file object is created by the main thread (thread A ).
The above assertion happens when B tries to write to the file after A has created the file .
I have tried to put a critical section where the common function to write to the file is called but still I see the assert .
Could this be because of my thread not being able to access MFC cFile Object correctly
Also this happens occasionally 2out of 10 times .
I also see that the file is finally getting written with contents for both thread A and B but this ASSERT is worrying me .
Any ideas ?
Engineering is the effort !
|
|
|
|
|
act_x wrote: I also see that the file is finally getting written with contents for both thread A and B...
If the possibility exists that both threads are wanting to access the file, I think you might need to wrap the read/write calls in a critical section (i.e., CCriticalSection).
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
It's likely that thread A had not yet actually opened the file, or at least assigned m_hFile to the file handle, before thread B runs. Since there is an OS call, it is very likely the open operation is triggering a sleep operation which, in turn, is causing thread B to run if it has been created by that point.
I suggest not creating thread B until thread A has opened the file. An alternative is to have thread B wait on an event that will be signalled once thread A has opened the file.
A critical section should be used for read/write/close operations, but are a potential problem here since thread B could get it's time slice before thread A even enters its critical section to open the file.
Another option to look at is for thread B to open and close the file.
Also note that when you close the file, thread B must either be terminated (wait on it's handle, then close the file) or should check if the file handle is valid before performing the operation.
Anyone who thinks he has a better idea of what's good for people than people do is a swine.
- P.J. O'Rourke
|
|
|
|
|
I will change an the content of a node in a XML-File. It is no problem, to get the specific node and its content. But to change the content of the Node I have to use the function "InsertData" from the class IXMLDOMText. Therefor I have to initialize the IXMLDOMTextPtr. But every time I try this, I get the error message, that the left part of ->"Query Interface" has to point to a class... So what's wrong with that?
Below the pasted code to make it a little bit more understandable.
Thanks, Hanno
CString fileName;
CFileFind find;
BOOL findFile;
IXMLDOMDocument m_iDocPtr;
IXMLDOMNodePtr m_iNodePtr;
IXMLDOMTextPtr m_iTextPtr;
findFile = (find.FindFile(strPath+"\\"+"*.xml",0));
while(findFile != 0) {
fileName = find.GetFilePath();
m_iDocPtr->Load((_bstr_t)fileName);
m_iFr = m_iDocPtr->createDocumentFragment();
m_iNodePtr = m_iDocPtr->selectSingleNode("//HI");
m_iNodePtr = m_iNodePtr->selectSingleNode("//Hello");
_bstr_t hello= m_iNodePtr->text;
if (atoi(hello) == 0) {
m_iTextPtr = m_iDocPtr->createTextNode("something");
m_iTextPtr->insertData(2,"something");
}
}
|
|
|
|
|
I'm looking for some clarity here. I register two MultiDocTemplates. The only important difference between the two templates is different views.
I don't want the initial dialog that asks me to pick a template before the main window is displayed. I have an initial view already set to run.
Here's some code from my InitInstance()
// InitInstance()
m_pDocTemplate = new CMultiDocTemplate(
IDR_2DVIEW,
RUNTIME_CLASS(CCdataMFCdisplayDoc),
RUNTIME_CLASS(CChildFrame),
RUNTIME_CLASS(C2DView));
AddDocTemplate(m_pDocTemplate);
m_pDocTemplate = new CMultiDocTemplate(
IDR_OPENGL_VIEW,
RUNTIME_CLASS(CCdataMFCdisplayDoc),
RUNTIME_CLASS(CChildFrame),
RUNTIME_CLASS(COpenGLView));
AddDocTemplate(m_pDocTemplate);
// create main MDI Frame window
CMainFrame* pMainFrame = new CMainFrame;
if (!pMainFrame->LoadFrame(IDR_MAINFRAME))
return FALSE;
m_pMainWnd = pMainFrame;
// Parse command line for standard shell commands, DDE, file open
CCommandLineInfo cmdInfo;
ParseCommandLine(cmdInfo);
// Dispatch commands specified on the command line
if (!ProcessShellCommand(cmdInfo))
return FALSE;
// The main window has been initialized, so show and update it.
pMainFrame->ShowWindow(m_nCmdShow);
pMainFrame->UpdateWindow();
// Make a starter document
NewDocument();
// Create a default View
CChildFrame *pFrame = new CChildFrame();
CCreateContext context;
CCdataMFCdisplayView *pview = NULL;
context.m_pCurrentDoc = theApp.GetDocument();
context.m_pNewViewClass = RUNTIME_CLASS(C2DView);
context.m_pNewDocTemplate = theApp.m_pDocTemplate;
context.m_pLastView = NULL;
context.m_pCurrentFrame = ((CMainFrame*)AfxGetMainWnd())->GetActiveFrame();
if (pFrame->LoadFrame(IDR_2DVIEW,WS_CHILD | WS_OVERLAPPEDWINDOW | FWS_ADDTOTITLE | WS_VISIBLE, theApp.m_pMainWnd, &context))
pFrame->InitialUpdateFrame((CMyDoc*)theApp.GetDocument(),TRUE);
// nothing pertinent follows
|
|
|
|
|
I found my answer. For those interested parties, I have to handle the ON_FILE_NEW message.
|
|
|
|
|
hi,
i want to make a login application(like windows login) that blocks all other processes/windows including the task manager. the application should be a simple dialog
can anyone help plz?
thanks
|
|
|
|
|
The DS_SYSMODAL style, which was for 16-bit Windows, has been "replaced" with the WS_EX_TOPMOST style.
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
I would want to load an image from a fixed path. This image changes every time, so I thought not include it like as a static resource. any idea?
Bye Daniel
|
|
|
|
|
LoadImage//For Load File
CImage //Class For Load File
|
|
|
|
|
thanks for the answer!!
But how can show it now ?
bye
|
|
|
|
|
Your question is a bit unclear. Are you wanting to load a .bmp file from disk at runtime, or are you wanting to embed a .bmp file in your application at compile time?
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
Ya !!
I'll try to explane the problem! I have two application:
- the first saves a .bmp, overwriting hold file, into a directory every about
5min, the image comes from a camera.
- the second must shows that image (something like a "refresh") pushing a button.
I tried but the image loaded doesn't change.
Can you halp me with a council?
thanks !!
|
|
|
|
|
Put a static control on your window/dialog, and associate a CStatic member variable with it using ClassWizard. Use SetTimer() to create a timer event every 300000ms (five minutes). In the event handler for the timer, call LoadImage() to load the .bmp file from disk. Using the returned handle, then call CStatic::SetBitmap() to associate the new bitmap with the static control. Make sense?
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
GREAT !!!
Now the application work perfectly !!
thanks for ALL DAVID!!
bye
|
|
|
|
|
hi all
i had made the class in VC++.NET which contain the API's now i want to use
this class in the C#.NET how to do that whether make the cllas library(DLL) of that class and
then use of simple only use the class.
i had not used those api's in the C# bcos it is difficult to get the help of
those api.
ddd
|
|
|
|
|
Hi!
is it possible, to make a castType from _bstr_t to "int"?
Thanks, hanno
|
|
|
|
|
Can't you just use atoi()?
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
|
Don't know what you like to achieve, but if you are up to put a integer value into a string a type cast is the wrong way. Use atoi() to convert character arrays to integers.
Hope this helped you out.
Walter
|
|
|
|
|
Yes, that did it! Thanks.
|
|
|
|
|
I just know sub window need ID to call some function.
does the main window need a ID? and where does the ID come to play?
|
|
|
|
|
What exactly are you asking here?
"Let us be thankful for the fools. But for them the rest of us could not succeed." - Mark Twain
"There is no death, only a change of worlds." - Native American Proverb
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
