|
Sounds like overheating to me. Try this: Take the case off, get a little desk fan and point it at the motherboard (probably the CPU/RAM is the best place to aim). If the computer works ok, you need to improve the cooling in the case.
--Mike--
Visual C++ MVP 
LINKS~! Ericahist | NEW!! PimpFish | CP SearchBar v3.0 | C++ Forum FAQ
|
|
|
|
|
Try number 32 :
Take the case off, get a little desk fan and point it at the motherboard (probably the CPU/RAM is the best place to aim). If the computer works ok, you need to improve the cooling in the case.
I'll do that  .But do you think, the the fault can be with the SMPS-Motherboar power connection point. i tried changing the SMPS. but still the problem is there. but wait a minute. everything works fine in DOS. HOW??..as said by mark, i feel like turning the aim on RAM again. i'm waiting for a spare RAM from my friend. once i get it, i'll see it that's the point. or i'd move on to try number 33. 
VuNic
|
|
|
|
|
I've occasionally had to swap power Supplies out after 2-3 years due to weird drops in voltage (usually on the +12V rail). If you've swapped out everything but RAM and PSU you may want to get a tester (some of the simples ones run only 20-30 bucks)
Hope you can pin down the fail point.
|
|
|
|
|
If you think it's the ram, and it's happened to me too. Then try memtest86 at memtest86.com I like the ability to make a bootable cd myself from an iso. Anyway If you have 2 chips just pull one and test it, then try the other.
Make sure you put it into extended test mode since I had one that would only fail when I did that.
My experience with this type of problem has always been, RAM, Cooling, bad power supply, and once a bad CPU. Most of the time it's RAM and Cooling though.
Swanny
|
|
|
|
|
your system might be infected with virus. try installing an antivirus program.
|
|
|
|
|
Hi There,
I am trying to import NMEA protocol from Magellan brand Meridian gold GPS into matlab through serial port and getting port is not avilable and time out.
|
|
|
|
|
I have written a program using C++ in my personal computer. It is an image processing application which performs basic function like edge detection/ histogram equaliztion etc.
Now i would like to move it out of the PC into a stand alone h/w system where i feed the pixel values and i get the processed pixel values as output.
I understand that this area is known as Embedded Systems.
I have my PC, a few image processing algorithms and a book on emebdded systes design. What more (h/w and s/w) will i need to convert my PC based program to a stand alone system?
I am a novice when it comes to h/w , so please pardon incase me post sounds funny to anyone here 
|
|
|
|
|
nripun wrote: I am a novice when it comes to h/w , so please pardon incase me post sounds funny to anyone here
basically it will come down to your choice in embedded system. There are few standards in embedded systems. In fact you can even get a PC based embedded system, kiosk style or much smaller. Image collection will be even less uniform, we use one brand of capture boards which includes a image processing library (though we found that Intel's was faster).
In the end, "how" will come down to what hardware you choose for the embedded system.
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
Hi everybody,
I want to transfer files between 2 computers by the modems. I don't know if there's any library or API functions I can use. Help me if you have any idea. Thanks a lot.
Then I kiss Ur eyes and thank God we're together
|
|
|
|
|
In which language you are expecting the solution.
|
|
|
|
|
I think Visual C is appropriate.
Then I kiss Ur eyes and thank God we're together
|
|
|
|
|
|
We have a project that uses a Sprint PCS Connection Card for Internet
communications. Currently the connection has to be made manually.
How do we automate this connection from code?
We are using C# .NET 2.0 for development.
Is there a Sprint developers forum?
Thanks for any help.
Ralph
|
|
|
|
|
Hi,
We have developed an application running on a Pocket PC for scoring certain characteristics of plants in trials in greenhouses. (High quality)Photos can be very helpful ´describing´ those plant characteristics. And so we would like to connect a 4-5+ mega pixel digital camera to a Pocket PC in some way and merge the trial-data collected with the (filenames of) photos taken.
Do you know of any solution to accomplish the above mentioned? Any help would be appreciated.
TIA,
Jan.
|
|
|
|
|
Hi,
I need to develop a application that modifies fields of the Type 00 ( BIOS Information ) on DMI configuration. The development must be done using the language C and must run on MS-DOS platform.
Does exist some header for this?
Any help is welcome!
Grateful,
Hélio
|
|
|
|
|
Hi!
I had download the source code of mass storage device driver for windows98 from Microsoft websit.And builded it with 98ddk on windows98 system,and then
installed it on win98 system. It can work correctly all the time.
If I suddenly remove the device from pc when copying file from pc to device or from device to pc on win98 system,the blue screen occur,and i have to restart my system.
But if do the same on win2000 or winxp there is no blue screen.
Now i wanna modify the driver source code to avoid the blue screen when suddently remove the device while it is exchanging data with pc on win98 system.
My question is:
1,If my hope has the possibility to come true?
2,If has,then which part of source code of this drive should i have to modify,and what couses the blue screen?
I know that in the source code it just abort all the pipes when device remove sudently but nothing else.
Thanks!
momer
All the blesses we are enjoy are the fruit of labor,toil,study and self-denail.
|
|
|
|
|
I believe Win98 cannot detect automatically when the device is removed the use has to tell it via the system tray.
Automatic detection was one of the additions to Win2k which is, of course, a different driver model.
Elaine ![Rose | [Rose]](https://codeproject.global.ssl.fastly.net/script/Forums/Images/rose.gif)
The tigress is here 
|
|
|
|
|
Hi!Elaine,
Yeah,I agree with you!
Thank you very much!
momer
|
|
|
|
|
Yeah,I agree with you.
Thank you very much!
|
|
|
|
|
If you want to find what part of your coder BSODed the PC, run a debug version, and after the crash, get the DMP file form the windows directory, and analyse it with DbgView.exe.
You need to set the paths of the source code files and the path to the pdb files.
Nunc est bibendum
|
|
|
|
|
Hi! fat_boy,
Thank you very much!I will have a try.
|
|
|
|
|
last night my hard drive crashed on my home pc. 
it's a Seagate Barracuda IV ATA100 hard drive. I'm looking for a replacement as we speak and was thinking about upgrading to a 200GB ATA133 model that I've found on newegg, but I'm not sure if it will be compatible being that it's ATA133 vs. ATA100. I wouldn't think so being that both are Ultra IDE, but I'm not sure.
As you can probably tell I'm not a hardware whiz, so I figured I'd ask. A friend also suggested maybe going with a 200GB Serial ATA model with a pci adapter (my pc only supports ide), but will the potential benefits of the faster Serial/ATA interface be cut off by the pci bus? does anyone have any experience with this?
Also, on a related note, I have some data on this crashed out drive that I'd like to try to retrieve (pics, docs etc.). Are there any tools (prefereably free) that anyone knows of that can help out with this? I don't think the drive is completely fried, but it won't boot. I'm going to try setting up a new boot drive tonight and slave this one to see if I can access anything. Does anyone have any other suggestions or ideas?
any help is appreciated.
-jim
|
|
|
|
|
Jim Matthews wrote: it's a Seagate Barracuda IV ATA100 hard drive. I'm looking for a replacement as we speak and was thinking about upgrading to a 200GB ATA133 model that I've found on newegg, but I'm not sure if it will be compatible being that it's ATA133 vs. ATA100. I wouldn't think so being that both are Ultra IDE, but I'm not sure.
all pata drives are compatable. The interface gracefully downgrades on either end.
Jim Matthews wrote: As you can probably tell I'm not a hardware whiz, so I figured I'd ask. A friend also suggested maybe going with a 200GB Serial ATA model with a pci adapter (my pc only supports ide), but will the potential benefits of the faster Serial/ATA interface be cut off by the pci bus? does anyone have any experience with this?
You might loose a bit off peak xfer speeds, and suffer a minor latancy hit, but the PCI bus is wide enough to support two 7200 rpm drives at max sustained xfer rate, so unless you've got something bandwidth intensive on the bus, I wouldn't worry about it.
At the same time, sustained 7200rpm drive is only ata66, so you won't see much of a gain from pata100 to sata150, the size of the onboard cache'll make a bigger difference. I wouldn't worry much about futureproofing your drive with a new mobo. optical drives are still almost exclusively pata, and from what I've heard the handful of sata ones in existance perform poorly. a new mobo purchase in the next few years shouldn;t be an issue. Afterall, USB's been ubiquitus on new pcs for 5+ years and we're only just starting to see some new mobos shedding legacy io ports.
|
|
|
|
|
thanks dan! 
-jim
|
|
|
|
|
finally got one for home. after getting a laptop, I'm fed up with usbflash driving my
code/release .exe back and forth from desktop to laptop...
So I got a wireless router.
I can hear the groans already...
My desktop's all plugged in and fine.
But my laptop can't find the wireless network 
I've moved it close, but when I go thru the network wizard,
it gives me somethin about "this may not work" and doesn't
let me go any further.
I'll be lookin up the KB article it mentions, but that's at home
The laptop hasn't been windowsupdated yet.
It's new tho (dell as of October) and i THOUGHT it'd be fine.
I tried pluggin the cable modem right into it and it still said
"somethin was missin".
Sighhhhhhhhh... So close yet so far away...
If you happen to know of anything off the cuff, I'd REALLY appreciate
the help...
...Steve
-- modified at 12:13 Tuesday 14th February, 2006
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
