Re: StreamReader timeout? - C# Discussion Boards

2-Jan-06 7:23

Is there a way to specify a timeout to StreamReader.ReadToEnd()?

Thanks,

/ravi

My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com

Dave Kreskowiak2-Jan-06 12:08

Dave Kreskowiak

2-Jan-06 12:08

No, there isn't.

Why would yo want a timeout for something that returns the contents of the Stream immediately? What are you trying to do?

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Ravi Bhavnani2-Jan-06 12:22

2-Jan-06 12:22

Dave Kreskowiak wrote:
Why would yo want a timeout for something that returns the contents of the Stream immediately?

If only it (always) did. Smile | :)

I was hoping to not have to spin off a worker thread to do the read.

<code>// (Error checking omitted from code fragment for brevity)</code>
HttpWebRequest req =
 (HttpWebRequest) WebRequest.Create ("http://ravib.com");
HttpWebResponse resp = (HttpWebResponse) req.GetResponse();
Stream stream = resp.GetResponseStream();
StreamReader streamReader = new StreamReader (stream);
string strContent =
  streamReader.ReadToEnd(); <code>// << can (potentially) take forever</code>

/ravi

My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com

Dave Kreskowiak2-Jan-06 14:59

Dave Kreskowiak

2-Jan-06 14:59

Wow!! The new information makes all the difference in the world! Now we know you're actually using this to download a web page.

Try using the WebRequest[^] version instead. This one supplies asynchronous methods to BeginGetRequestStream and, more importantly, End it!

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Ravi Bhavnani2-Jan-06 15:05

2-Jan-06 15:05

Dave Kreskowiak wrote:
This one supplies asynchronous methods to BeginGetRequestStream

While that form allows the caller to asynchronously get the stream, that's not the problem. The problem is waiting for a read from the obtained stream to complete. Frown | :(

/ravi

My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com

Dave Kreskowiak2-Jan-06 16:52

Dave Kreskowiak

2-Jan-06 16:52

Setup your own timer that waits for however many second before you call EndGetResponseStream. You'll get whatever was returned until the timer expired.

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Ravi Bhavnani2-Jan-06 16:56

Execute shell command in c#

2-Jan-06 16:56

Good point - thanks!

/ravi

My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com

jbu202-Jan-06 7:01

jbu20

2-Jan-06 7:01

How Do I Execute shell command in c# ?
{like i you do in DOS}

Re: Execute shell command in c#

Ravi Bhavnani2-Jan-06 9:40

Customizing A Setup Project

2-Jan-06 9:40

This[^] article may help.

/ravi

My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com

TofuBug242-Jan-06 6:15

TofuBug24

2-Jan-06 6:15

I've got (what I think is a simple) problem.
To which (I fear is not so simple) to fix.

Currently I am trying to configure a setup project for my current solution (written using VS 2005 TS) now my solution consists of two or more projects (not including the setup project of course) I say two or more projects because my solution houses at the moment 2 VSTO designed word documents that are coded to pull information from a database fill in the blanks and print out the resulting document and close word automatically, I still have several Excel spreadsheets to code so the project list will grow.

Now to access each of the word "documents" the Main project has a Process object that has it's properties set to point to the required word document. the program simply runs the process and each document handles closing itself and word automaticaly. right now the two documents full path locations including the document file name are stored in two string constants in the main programs .config file.

under VS each of the two string constants are pointing to the ..\bin\release\"Document".doc under each word document's project folder

Now my setup project at the moment has all the outputs from each project installed into the same folder under Program Files (which is just fine by me it's not that complicated to warrant sub folders)

Now the problem lies in the fact that now the required document are no longer located where the .config file constants say they should be (they will be in the installion folder). Now I understand that any .config file under .net is XML and as such reading and writing to it should be as simple as reading and righting to a DB table my problem is how do I get my setup project to change the .config file's constants to point to the installed documents new locations.

Ryan

Data error reading Common Sense
Abort,Retry,Ignore,Fail?iiiiiiii

Re: Customizing A Setup Project

S. Akif Kamal2-Jan-06 19:46

S. Akif Kamal

2-Jan-06 19:46

My frd just write a custom action that will do the job for you and then add it in the setup project using Custom Actions view.

To create a custom action, add a new project of type "Class Library", then add an installer class and override its "Install" and "Uninstall" methods. Both methods contains an argument of type IDictionary which can be used to store information that you want to pass to uninstaller from the installer. Call your config update logic from the install method.

Finally add this project in setup as custom action from custom action view.

Akif

Re: Customizing A Setup Project

TofuBug244-Jan-06 21:30

TofuBug24

4-Jan-06 21:30

Thanks so much for the help it was exactly what i needed much appreciated

Ryan

Problems with crystal report in vs2005?

Joseph Robert2-Jan-06 5:45

Joseph Robert

2-Jan-06 5:45

Hi, happy new year!
For me it is not starting very well, with VS2005 at least.
I have been using crystal report form vb6 up to now, not because I like it, in fact I don't, too many bugs. But now with VS2005 I believe it is worse!!
I wrote a class in VS2003 that can be called to preview and generate reports. When I had to move to VS2005 (big sigh!!) in december last, I tried to re-used that class. I converted it fine, until I write a report using parameters.
The class I used in the previous version of VS were working fine up to now.
With this actual version of Crystal report It seems to me that the parameters are not transferred to crystal report.
Below is one of the overloaded proc that I use. When compiled it generates no errors but when the report is loaded crystal keeps on prompting for the parameters. Could any one figure out what is wrong.
Thanks to help.

public void ReportON (string ReportName,string ParameterName1,string ParameterName2,
string ParameterValue1,Single ParameterValue2)
{
string repToload=null;
try
{
this.Cursor=Cursors.WaitCursor;
repToload = ReportLoc + ReportName;
reportDocument1.Load (repToload,CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy);
}
catch
{
MessageBox.Show ("Report template missing." + "\n"
+ "You need to run setup again to repair the installation.","Report Viewer",MessageBoxButtons.OK,MessageBoxIcon.Error);
this.Cursor=Cursors.Default;
return;

}
SQLcnx.ConnectionString = DBconnect.connection;

#region reset login info (overiding of crystal local server login)
CrystalDecisions.CrystalReports.Engine.Table CurrentTable;
CrystalDecisions.Shared.TableLogOnInfo CurrentLogin;

reportDocument1.Load (repToload,CrystalDecisions.Shared.OpenReportMethod.OpenReportByTempCopy);

CurrentTable = reportDocument1.Database.Tables[0];

CurrentLogin = CurrentTable.LogOnInfo;
CurrentLogin.ConnectionInfo.ServerName = DBconnect.ServerName;
CurrentLogin.ConnectionInfo.UserID = Registry.CurrentUser.OpenSubKey("GreenWorm\\PRMS\\Data").GetValue("accName").ToString();
CurrentLogin.ConnectionInfo.Password = Registry.CurrentUser.OpenSubKey("GreenWorm\\PRMS\\Data").GetValue("passWord").ToString();
CurrentLogin.ConnectionInfo.DatabaseName = "PRMSdb";

CurrentTable.ApplyLogOnInfo(CurrentLogin);

#endregion

reportDocument1.SetParameterValue (ParameterName1,ParameterValue1);
reportDocument1.SetParameterValue (ParameterName2,ParameterValue2);

SQLdataAdapter.Fill(repDataset);
reportDocument1.SetDataSource (repDataset);
crystalReportViewer1.ReportSource = reportDocument1;

this.Show();

this.Cursor=Cursors.Default;
}

Joseph Robert

Finding the changed subkey under a particular registrykey

rakesh_nits2-Jan-06 4:04

rakesh_nits

2-Jan-06 4:04

Hi All,
I want to watch a particular registry key and whenever any sub key under this key changes i am trying to get the name of that subkey.for getting when a particular key is changed I can use RegNotifyChangeKeyValue but this only tells me that the key has been changed it didn't tell which subkey has been changed under the key which i am watching.One way will be i can compare the registry tree befor and after the changes which will be a very clumsy and tedious solution.Any suggestions how to do this?Any help will be greatly appreciated.Thanks in Advance.
Rakesh

Security Exception

zt.Prog2-Jan-06 2:09

zt.Prog

2-Jan-06 2:09

I try to run my C# application from a network drive and I get a Security Exception saying: "Request for the permission of type 'System.Security.Permissions.SecurityPermission, mscorlib, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed."

Why does this happen? what should I do?

Re: Security Exception

Colin Angus Mackay2-Jan-06 4:14

Colin Angus Mackay

2-Jan-06 4:14

capuano wrote:
Why does this happen?

Running an application from another computer is not a trusted action. In other words, your computer does not trust that the assembly sitting on the other computer is acceptable to run on your computer.

capuano wrote:
what should I do?

This is from a guide I wrote regarding a .NET 1.1 application. It should be approximately the same:

Trust needs to be set up for windows applications written for the .NET framework to run through the on remote machines via UNC paths.

* Launch "Microsoft .NET Framework 1.1 Configuration" from the Administrative Tools programs folder.
* In the tree control on the left expand the elements My Computer ~ Runtime Security Policy ~ Machine ~ Code Groups ~ All_Code ~ LocalIntranet_Zone
* Ensure that the LocalIntraner_Zone node is selected so that the panel on the right is headed LocalIntranet_Zone Code Group.
* Select the "Add a Child Code Group" link in the right panel.
* Give the new Code Group the name "What ever name you want"
* Press Next
* Choose the condition type of "URL"
* In the URL box type the full URL to the wincode directory, e.g. file://server_name/share_name/folder_name/*
* Remember to include the asterisk to ensure that all assemblies can run
(For a more restrictive set each assembly can be individually named in its own code group)
* Click Next
* Choose the permission set "Full Trust"
* Click Next
* Click Finished
* A reboot may be necessary.

The above may or may not be acceptable to your situation - but you'll see where you need to make changes and with some experimentation you can see what other things are possible too.

ColinMackay.net
"Man who stand on hill with mouth open will wait long time for roast duck to drop in." -- Confucius
"If a man empties his purse into his head, no man can take it away from him, for an investment in knowledge pays the best interest." -- Joseph E. O'Donnell

Email Notification

MalikRizwan2-Jan-06 1:10

2-Jan-06 1:10

I have to develop and email notification system, all the employees will keep their TO DO list in Sql server and an email notification will be fire to them before some specific perioud of every Job to do ...

Kindly tell me pacakages n libs used for this work.

R A M

PrakashBhaskar2-Jan-06 1:23

PrakashBhaskar

2-Jan-06 1:23

Hi,
Better you create a seperate visual basic application and make an exe for that application, and add that exe to schedule task

Thanks
Warm Regards
Prakash-B

MalikRizwan2-Jan-06 1:36

2-Jan-06 1:36

Prakash, using schedule task is better when we have to run only one executable. But there may be more than 1 emails to be sent by my application

R A M

PrakashBhaskar2-Jan-06 1:41

PrakashBhaskar

2-Jan-06 1:41

Hi,
can you explain me how you are getting the mailing list. My opinion is get a mailing list count and use for loop to send a mail. I think you might get the clue.

Thanks
Warm Regards
Prakash-B

MalikRizwan2-Jan-06 1:46

2-Jan-06 1:46

that is not what u r saying .. i will get email list from DB but i dont have to send all the emails at once. but every email will be sent after a specific period(defind by user previously in db)

R A M

PrakashBhaskar2-Jan-06 1:53

PrakashBhaskar

2-Jan-06 1:53

Hi,
Can you explaim me detailed procedure for send email (mean that how u will get list , which time you want to send mail) so that i can try with my best.

Thanks
Warm Regards
Prakash-B

MalikRizwan2-Jan-06 2:03