|
you have to do all your drawing in response to a WM_PAINT message, or in MFC-talk, in your window/dialog's OnPaint member. that function is called when your window needs to be repainted, and if you're painting anywhere outside that funciton, your stuff will be overwritten the next time the default drawing stuff gets called.
Cleek | Image Toolkits | Thumbnail maker
|
|
|
|
|
Thanks. That works pretty good. But I must be doing something else wrong. Below is a snip from a simple dialog program to draw a box when a button is pushed. I put the drawing stuff in the OnPaint. Although it does redraw the box most of the time, when I drag another window over the box slowly, sometimes I get lines where the box was not totally redrawn.
void CBoxDlg::OnPaint()
{
int x, y;
CPaintDC dc(this); // device context for painting
if (IsIconic())
{
SendMessage(WM_ICONERASEBKGND, (WPARAM) dc.GetSafeHdc(), 0);
// Center icon in client rectangle
int cxIcon = GetSystemMetrics(SM_CXICON);
int cyIcon = GetSystemMetrics(SM_CYICON);
CRect rect;
GetClientRect(&rect);
int x = (rect.Width() - cxIcon + 1) / 2;
int y = (rect.Height() - cyIcon + 1) / 2;
// Draw the icon
dc.DrawIcon(x, y, m_hIcon);
}
else
{
if (draw_rectangle == TRUE)
{
for(x=0;x<100;x++)
{
for(y=0;y<100;y++)
{
dc.SetPixel(x,y,RGB(240,0,0));
}
}
}
}
}
void CBoxDlg::OnDrawButton()
{
draw_rectangle = TRUE;
RedrawWindow();
}
|
|
|
|
|
i need an example of open dialog box with Source Control button (meaning... open dialog box that allows to open regular files on a client computer and also allows to open files from Source Control (like sourcesafe)).
|
|
|
|
|
Hi,
i m working on a Project , to make backup on tape drive . i m having problem while writting the last DBLK on the tape and don't know how to find its help on net . do any of you GURU's plz refer any help avaiable on net for this problem.....
Thanks ....
"I only fail when i give up "
|
|
|
|
|
Hello.
What's the problem?
If you want to know how to mark the end of a data file on tape, the normal way is to write a Tape Mark.
The rule is:
End Of File: A Tape Mark
End Of data on Tape: Two consecutive Tape Marks.
Is that your problem?
Kakan
|
|
|
|
|
hi,
thanks for your reply ..
what i m doing is
i m writing Dblks in the following order , i have also check that windows backup utility makes backup in such way on tape drive ,
On PBA: 1
Tape Header
------------
On PBA: 2
Tape Mark
------------
On PBA: 3
SSET
Volb
Dirb
File
Espb
------------
On PBA: 4
Tape Mark
------------
On PBA: 5
ESET
------------
On PBA: 6
TFDD
------------
On PBA: 7
TSMP
------------
On PBA: 8
ESET
-----------
On PBA: 9
Tape Mark
-----------
After writting in this way i m checking with MTFCheck utility , which shows that there is problem from the ESET DBLK , ( PBA 5 )
=======================================================================
ESET Dblk:
[WARNING] Possible wastage of space: 15360 bytes.
[ERROR] Checksum failed in current stream header.
[ERROR] Valid ESET not found.
[ERROR] DBLK must be aligned with the FormatLogicaAddress boundary .
[ERROR] ESET was expected here.
[ERROR] Valid ESET not found.
ESPB was expected here.
[ERROR] Couldn't read data for valid ESET.
=================================================================
waiting for your reply
"I only fail when i give up "
|
|
|
|
|
Hello.
OK, I get your problem.
But I'm sorry to say I can't help you. I thougt you were using raw tape writes, and had a problem with that.
I've created code to handle all major file systems on magnetic tape, but I haven't used Windows backup tape library.
Again, I'm sorry.
Kakan
|
|
|
|
|
thanks for your reply...
may you plz refer me how to get solution of this problem on net . i have tried few other forums and not able to find any help for this...
thanks again ....
"I only fail when i give up "
|
|
|
|
|
|
hi,
yah , i have seen this , after making backup from NTBackup utility on tape drive , i can successfully restore the data , but i m facing problem in writing on tape drive , and writting according to MTF is really getting hectic for me ... plz reply...
"I only fail when i give up "
|
|
|
|
|
if listbox shows the path of a jpeg file, how can i open this jpeg file form a 32x32pixels picture on the front of row?
which lib should i use?
|
|
|
|
|
|
library GDI+
class Graphics
class Bitmap
see in MSDN
|
|
|
|
|
i dont find any reason for this error. my application was working fine. but it started behaving like a b****t. when ever i close it, it throws
"QACD Application has encountered a problem and needs to close. We are sorry for the inconvenience." exception 4 times.
this happens only upon closing the Dialog. what could be the matter?
"But your mind is very complex, very tricky. It makes simple things complicated. -- that's its work. And for centuries it has been trained for only one thing: to make things so complicated that your life becomes impossible."- Osho
<marquee scrollamount="1" scrolldelay="1" direction="up" height="10" step="1">
--[V]--
|
|
|
|
|
VivekuniQ wrote: this happens only upon closing the Dialog. what could be the matter?
Are you freeing all the allocated resources ?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers,
Alok Gupta
VC Forum Q&A :- I/ IV
|
|
|
|
|
its again working fine!! i didn't do any change to it.  's going on
"But your mind is very complex, very tricky. It makes simple things complicated. -- that's its work. And for centuries it has been trained for only one thing: to make things so complicated that your life becomes impossible."- Osho
<marquee scrollamount="1" scrolldelay="1" direction="up" height="10" step="1">
--[V]--
-- modified at 10:52 Monday 19th December, 2005
|
|
|
|
|
I have the strangest problem. A project I'm working on contains several classes. Some of the classes were previously a part of a library that I was linking with, but to make it easier to debug I moved the code to the project. The strange thing is that every time I call new (or call a function that calls new) inside these classes, new fails to allocate memory. However, other classes in the same project have no problem calling new. When stepping into the code, the culprit is the line where new calls malloc( ), since malloc( ) returns NULL. Has anyone experienced a similar problem?
Regards,
Daníel
|
|
|
|
|
Nevermind, this was because there were different versions of the .h file for the class in question, which meant that the class thought it occupied more memory than it really did..
|
|
|
|
|
Hi,
How can i post a message from a Dialog to a Doc/View CCtrlList object (View2) with 3 Views (Using the CSplitter) at total ?
Using the GetParent()->PostMessage(...) does not work ? No errors but can not receive the message.
Any suggestions ? Is there any way to have direct access to the main View's CListCtrl from a dialog ?
Regards,
sdancer75
|
|
|
|
|
If the view is creating the dialog the simplest way would be to pass a pointer to the list control to the constructor (or have a setter) but it might be better to get the active document, change it then tell it to update all views.
ed
~"Watch your thoughts; they become your words. Watch your words they become your actions.
Watch your actions; they become your habits. Watch your habits; they become your character.
Watch your character; it becomes your destiny."
-Frank Outlaw.
|
|
|
|
|
Hi,
Is there any way to write to the different Tabs of a CProperySheet without activate it using the SetActivePage ?
If i try to write directly without activation i get an Assertion Error.
On my onInitDialog i initialize the control with the following code
CPropertySheet m_Sheet;
CBookSheetBasic m_SheetBasic;
CBookSheetDetails m_SheetDetails;
m_Sheet.AddPage (&m_SheetBasic);
m_Sheet.AddPage (&m_SheetDetails);
m_Sheet.Create (this, WS_TABSTOP | WS_CHILD | WS_VISIBLE,WS_EX_CONTROLPARENT);
m_Sheet.SetWindowPos (NULL,0,100, 0,0,SWP_NOZORDER | SWP_NOSIZE | SWP_NOACTIVATE);
When I try to fill the all the objects from all tabs i have to use the m_Sheet.SetActivePage causing a little flickering.
The filliing process is including the following code :
m_Sheet.SetActivePage (&m_SheetBasic);
m_SheetBasic.m_cbLanguage.ResetContent ();
m_Sheet.SetActivePage (&m_SheetDetails);
m_SheetDetails.m_cbOriginalLanguage.ResetContent ();
m_SheetDetails.m_cbOriginalPublishHouse.ResetContent ();
m_SheetDetails.m_cbCover.ResetContent ();
Regards,
sdancer75
|
|
|
|
|
Hope this will help...
http://www.codeproject.com/property/hacking_the_cpropertyshee.asp[^]
Happy christmas friends. May the Love of My Lord and Saviour Jesus bring forth Joy and Happiness into your life too.
<marquee direction="up" height="30" scrolldelay="1" step="1" scrollamount="1" hspace="0" vspace="0">
--Owner Drawn
--Nothing special
--Defeat is temporary but surrender is permanent
--Never say quits
--Jesus is Lord
|
|
|
|
|
Whenever i debug a dll thru the main application the execution is not coming to the break point inside the dll and whenever i press shift+F5 it is showing "Preloaded symbols may not match .dll."
Please tell me what is happening.
Thanks in advance,
John
|
|
|
|
|
|
Hello,
Are you using Visual Studio 2005 Standard or Express edition perhaps? I have the same problem. I think that it is a missing feature in the standard edition, since the professional edition and higher support this. Others say that it might be a bug.
Behind every great black man...
... is the police. - Conspiracy brother
Blog[^]
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
