|
Hi everyone.
im sure most of you have heard, seen or installed the Gmail drive namespace extension found at http://www.viksoe.dk/code/gmail.htm
its a great little app.
what I am trying to do is build small open source app ontop of the gmail drive which would enable a little more control when transferring files between the local drive and gmail drive. what i have in mind is a similar interface to ftp clients.
anyway at first glance i thought this would be quite easy. I am coding in visual Studio using C++ i opened a new MFC project. and implemented a new CFileDialog class this worked fine and it recognises the Gmail drive but thats as far as i can get.
theres 2 issues firstly
when i select the Gmail drive it treats it as a file not a folder(so it wont actually log onto gmail to see the files currently located on the Gmail Drive).
and 2ndly
when i look at the path returned from the CFileDialog i get ? ::{20D04FE0-3AEA-1069-A2D8-08002B30309D}\::{2B3453E4-49DF-11D
but when i try to copy a file to this location i get an error (obviosly as this is not a vaild windows file location)
(just to note if i use any win32 application and try to open or save directly to the gmail drive the same errors occur. this seems to be a common problem for all programs.)
i have never used shell namespace extensions before so am not 100% sure where to go from here.
perhaps there is a way to turn the returned string into a valid windows file location.
or is there a class already out there that works well with namespace extensions allowing files to be copied from one to another.
the unfortunate thing is i dont have the source code for the gmail drive shell extension. so until i have that this project may never get off the ground.
If any1 has any advice or ideas on how to tackle this problem im all ears.
thanks
|
|
|
|
|
well i have worked out the first problem of not being able to see the files this can be accomplished using SHBrowseForFolder.
and i am still working on being able to copy the files from gmail drive to HD.
|
|
|
|
|
Can anyone tell me what is the proper way to position a toolbar (actually a DialogBar, but the code is very similar) to the right of an existing toolbar? When I use code like:
m_slideBar.Create( this, IDD_SLIDETOOL, CBRS_TOP, IDD_SLIDETOOL );
m_slideBar.EnableDocking(CBRS_ALIGN_ANY);
DockControlBar(&m_slideBar);
It puts the toolbar on the top of the screen, underneath the normal toolbar.
I can use GetWindowRect(&rc1) to get it’s position, but I can’t seem to move it properly. I tried MoveWindow(rc1) but that doesn’t do the job properly. First of all, it leaves a blank “bar”, i.e. a blank space, where m_sliderBar was. Second, it doesn’t show up until I undock the first toolbar. It then appears and I can redock the first bar again.
I’m sure there must be some accepted way of doing this. I just don’t know what it is. Any help would be greatly appreciated.
Thanks,
Ilan
|
|
|
|
|
I think this [^] article will help.
|
|
|
|
|
Cedric,
Thanks for the help. I was confused by the rect.Offset(1,0) in what it really meant. It means to shift the rectangle 1 pixel to the right. Why 1 pixel, I wondered?
In truth, you can get a better result if you shift it by the size of the first toolbar plus 2 pixels. By shifting only 1 pixel it causes the second toolbar to be smack up against the first, with no space to breath. Adding the extra 2 pixels gives a nicer look.
Thanks again,
Ilan
|
|
|
|
|
Is it possible to find out what type of account the user running your application has, ie. whether they are admin/super-user or just a user?
|
|
|
|
|
PCHUserSettings.IsAdmin
The IsAdmin property retrieves a Boolean value that indicates whether the user is logged on as an administrator.
|
|
|
|
|
Determining what group(s) a user belongs to is not the same thing as finding out if they are an administrator or not. For the former, check out NetLocalGroupGetMembers(). For the latter, check out MSDN article Q118626.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
Thanks for your replies, I will check it out
|
|
|
|
|
How do you people manage resources when using a source control system ?
here, we always end up having duplicate IDs ( same number for 2 or more different IDs )
We are using SubVersion; so everyone can locally modify the resources without knowing what others are doing; and when updating, the files get merged without problem.
I could ask our IT team to upgrade to the latest SubVersion which support file locking, but that might take a long time to do.
The problem is that we are doing large amount of UI, and each one of us is modifying those files.
Any Ideas, Suggestions, Links ?
I have to look at Anna's
ResOrg[^], any feeback on that tool ?
Thanks.
Maximilien Lincourt
Your Head A Splode - Strong Bad
|
|
|
|
|
To resolve the issue, I wrote some macros (for VC++ 6.0) that will allow you to edit the resource.h file, select any portion of the resource symbols, and then it will renumber them with a user-specified starting number.
It only requires that someone take the responsibility to renumber the resources after merges - and we assign that to the developer that made the merge.
Here's the macros I use:
Sub RenumResType()<br />
'DESCRIPTION: Renumber resource IDs sequentially for a specified type of resource<br />
RType = InputBox("Enter the type of resource you want to renumber?" + vbLf + vbLf +_<br />
"Example: IDC_ or IDD_" + vbLf +_<br />
"Be sure to include the underscore if needed.", "Resource Type", "IDC_")<br />
if len(RType) = 0 then<br />
Exit Sub<br />
end if<br />
<br />
iStart = InputBox("Enter the starting resource number you want to use", _<br />
"Starting Resource ID", "1000")<br />
if len(iStart) = 0 then<br />
Exit Sub<br />
end if<br />
i = iStart<br />
<br />
<br />
ActiveDocument.Selection.StartOfDocument<br />
ActiveDocument.Selection.SelectLine<br />
ActiveDocument.Selection.SelectAll<br />
StartLine = ActiveDocument.Selection.TopLine<br />
EndLine = ActiveDocument.Selection.BottomLine<br />
ActiveDocument.Selection.StartOfDocument<br />
for lineno = StartLine To EndLine<br />
ActiveDocument.Selection.SelectLine<br />
CurrText = ActiveDocument.Selection<br />
pos = InStr(CurrText, RType)<br />
if pos > 0 then<br />
ActiveDocument.Selection.EndOfLine<br />
ActiveDocument.Selection.WordLeft dsExtend<br />
ActiveDocument.Selection = i<br />
i = i+1<br />
end if<br />
ActiveDocument.Selection.StartOfLine<br />
ActiveDocument.Selection.LineDown<br />
Next<br />
ActiveDocument.Selection.StartOfDocument<br />
End Sub<br />
<br />
Sub RenumSelRes()<br />
'DESCRIPTION: Renumbers the selected resources sequentially<br />
CurrText = ActiveDocument.Selection<br />
if Len(CurrText) = 0 then<br />
MsgBox "No text has been selected"<br />
Exit Sub<br />
end if<br />
<br />
iStart = InputBox("Enter the starting resource number you want to use", _<br />
"Starting Resource ID", "1000")<br />
if len(iStart) = 0 then<br />
Exit Sub<br />
end if<br />
i = iStart<br />
<br />
StartLine = ActiveDocument.Selection.TopLine<br />
EndLine = ActiveDocument.Selection.BottomLine<br />
for lineno = StartLine To Endline<br />
ActiveDocument.Selection.GoToLine lineno<br />
ActiveDocument.Selection.SelectLine<br />
CurrText = ActiveDocument.Selection<br />
pos = InStr(CurrText, "#define ")<br />
if pos > 0 then<br />
ActiveDocument.Selection.EndOfLine<br />
ActiveDocument.Selection.WordLeft dsExtend<br />
ActiveDocument.Selection = i<br />
i = i+1<br />
end if<br />
Next<br />
ActiveDocument.Selection.GoToLine StartLine<br />
End Sub<br />
As you can see, there are two macros here - one will renumber all resources of a given type (IDC_, or IDS_, etc) and the other renumbers all resources you have selected.
Hope that helps.
Karl - WK5M
PP-ASEL-IA (N43CS)
<kmedcalf@ev1.net>
PGP Key: 0xDB02E193
PGP Key Fingerprint: 8F06 5A2E 2735 892B 821C 871A 0411 94EA DB02 E193
|
|
|
|
|
Hi Maximilien,
ResOrg will spot resource ID conflicts either within or between files, generate detailed HTML reports showing them, and be used to renumber selected symbols via a symbol renumbering wizard.
I'd suggest a few things to make the process of managing IDs easier:
- If you can, namespace your IDs by module (e.g. IDC_MODULE1_NAME, IDC_MODULE1_FREQUENCY). That way you'll be able to see at a glance which module the symbol originates in.
- Allocate a defined range of symbol values for each module. That way, clashes between modules (which can cause some really odd behaviour if you're using MFC Extension DLLs) are far less likely.
- Give someone on the team responsibility for managing IDs, and make others listen to them (from experience, this is usually the hardest part)
Good luck! If you have any specific queastions about ResOrg or how to use it, please feel free to ask. 
Anna ![Rose | [Rose]](https://www.codeproject.com/script/Forums/Images/rose.gif)
Riverblade Ltd - Software Consultancy Services
Anna's Place | Tears and Laughter
"Be yourself - not what others think you should be"
- Marcia Graesch
"Anna's just a sexy-looking lesbian tart"
- A friend, trying to wind me up. It didn't work.
|
|
|
|
|
|
|
Not replying to Max but more to the thread... I need to establish source control on a multideveloper VIsual Studio project. Early on, we ran into problems with two or more developers working in the UI area. Merges just didn't happen easily. What we do now, and it has never failed us, is that we have a baseline project, and we cut/paste new dialogs from the new projects to the baseline. This ends up copying all of the dialog description plus the binary stuff at the end (VS knows how to completely copy the dialog object....).
Stop groaning - it works, and we were new to the IDE 18 months ago.
Now, I see that people just "check in" their new resource files, and, assuming there are no resource conflicts, Visual Source Safe knows how to merge the resource files correctly?
I know, I know - try it, and I will, but I'd like someone to confirm that it should work like this.
Thanks
C. Gilley
Will program for food...
Whoever said children were cheaper by the dozen... lied.
|
|
|
|
|
Hi to everybody,
I am developping a graphic ActiveX that displays several IP addresses around a circunference and linked between them. it can occur that if there are a lot of IPs, they couldn't be seen properly. For that I would like to be able to zoom an area of the screen.
Is there any possibility to do this easily?
Thank you very much.
Javier
|
|
|
|
|
See if this article is of any help.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
|
I have a structure which composes of structures , which is further nested with structures and the nesting goes for a certain depth .If i use this main structure in a class i have to initalize the whole of the structure their nested mambers which takes a lot of overhead while coding .Is there a faster way ot initialize this?
for eg:-
typedef struct
{
A *a;
B *b;
}Main;
typedef struct
{
A1 *a1;
A2 *a2;
}A;
typedef struct
{
A11 *a11;
A12 *a12;
}A1;
similarly for A2,B,B1,B2......and so on for all the nested members. if i have to use it in the class it takes a large overhead while initialising all the members using 'new' operator . Is there a better way of redesigning this coding?
hitherto shall thou come but not further thee
|
|
|
|
|
One alternative would be to initialize structure each in its own constructor.
"Ideas are a dime a dozen. People who put them into action are priceless." - Unknown
|
|
|
|
|
How does one convert WCHAR to wchar_t?
I am the handsome one in the crowd.
|
|
|
|
|
No conversion needed.
WCHAR is wchar_t typedefed
typedef wchar_t WCHAR;
« Superman »
|
|
|
|
|
TCP is a connection-oriented protocol, UDP (User Datagram Protocol) is a connectionless protocol. Can some one tell me the simple meaning or a scenarion of connectionless connection ?
|
|
|
|
|
if i remember well (not sure at all so  ) you can use UDP when you send packets to a whole network (not a determined peer).
now, if anybody knows much, i give up
TOXCCT >>> GEII power
[toxcct][VisualCalc]
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
