shell extension (windows explorer ) - .NET (Core and Framework) Discussion Boards

Re: Event handling on remoting classes

Anonymous11-Jun-05 14:07

Anonymous

11-Jun-05 14:07

thanks alot. your code helped me.

Re: Event handling on remoting classes

Anonymous11-Jun-05 14:26

Anonymous

11-Jun-05 14:26

but when it want to handle the event there is another error telling me Can Not find ... assembply.
the object can be referenced but not events.
i really appreciate any help since i couldnt understand how to solve it.

Wrapper class for SqlConnection

Hamlet_h10-Jun-05 4:00

Hamlet_h

10-Jun-05 4:00

I need wrapper class for SqlConnection which realizes interface ICommnad.

Re: Wrapper class for SqlConnection

Dave Kreskowiak10-Jun-05 4:17

Dave Kreskowiak

10-Jun-05 4:17

Is there something wrong with using SqlCommand?

RageInTheMachine9532
"...a pungent, ghastly, stinky piece of cheese!" -- The Roaming Gnome

Re: Wrapper class for SqlConnection

Not Active10-Jun-05 9:31

Not Active

10-Jun-05 9:31

Have you look at the Microsoft Enterprise Library Data Access Application Block?
http://msdn.microsoft.com/library/default.asp?url=/library/en-us/dnpag2/html/daab.asp[^]

Check permissions

cyonite10-Jun-05 2:55

cyonite

10-Jun-05 2:55

I have a problem with checking file permissions. I'm trying to check wether a user can write, read to a specific folder/file but when i test my code it says it can even thou i have removed all permissions. Don't know if the code is correct.

<br />
FileIOPermission filePermission = new<br />
   FileIOPermission(FileIOPermissionAccess.Write,<br />
                    Request.PhysicalApplicationPath+@"test\\test.txt");<br />
try<br />
{<br />
   filePermission.Demand();<br />
   Reponse.Write("Permission demand successful");<br />
}<br />
catch( SecurityException securityEx )<br />
{<br />
  Reponse.Write(securityEx.Message);<br />
}<br />

Custom Editor for TreeView Nodes!!!&#9786;

sharaabi10-Jun-05 2:11

sharaabi

10-Jun-05 2:11

Hello You!
I need Your HELP.
I have my own TreeView Nodes Editor, in order to add 'MyTreeNode'', like node which are ComboBox and so.

I have two classes. one inherit from 'TreeView' and the other from 'TreeNode'.

In 'MyTreeView' i override 'Nodes' (keyword- new) in order to open my custom editor.

In public partial class MyTreeView : TreeView, I use the next statement:

[

DesignerSerializationVisibility(DesignerSerializationVisibility.Content),

Editor(typeof(NodesTypeEditor), typeof(UITypeEditor)),

]

new public TreeNodeCollection Nodes

{

get { return base.Nodes; }

set

{

TreeNode[] myTreeNodeArray = new TreeNode[((TreeNodeCollection)value).Count];

((TreeNodeCollection)value).CopyTo(myTreeNodeArray, 0);

((TreeNodeCollection)value).Clear();

this.Nodes.AddRange(myTreeNodeArray);

}

}

but the DesignerSerializationVisibility create the next code, which produce casting error on run time:

MyCheckTreeNode myCheckTreeNode1 = ((MyCheckTreeNode)(new TreeNode("TreeNode")));

I need it to be :

MyCheckTreeNode myCheckTreeNode1 = new MyCheckTreeNode("TreeNode");

In the editor i use TreeView and PropertyGrid. the code in 'Add CheckBox Node' is:

treeView1.Nodes.Add(new MyCheckTreeNode("TreeNode"));

How can i fix it???

Please Help me. I need it fast.

Thanks,

Ran S'

shell extension (windows explorer )

Anonymous8-Jun-05 23:56

Anonymous

8-Jun-05 23:56

Using context menu in windows explorer treeview (left part), I would like to launch my winform application in the listview (right part of windows explorer).

Is it possible ? (for the moment i just know how to create context menu in windows explorer)

Project settings - output

john john mackey8-Jun-05 14:46

john john mackey

8-Jun-05 14:46

I have a question on how to configure my .VCPROJ (VC++ 7.10) project properties so that I can produce both a .LIB and a .DLL when I compile.

In Studio.NET IDE, i can go under

Project->Properties->Configuration Properties->General->Configuration Type>

And set it to build a .LIB (or a .DLL). In a VC++ 6.0 version of a project I have, I can build both .LIB and .DLL in one compile.

How can I do this?

Thanks,
Johnny

VS .NET Installer crashing from CustomActionData

lukemc8-Jun-05 8:43

lukemc

8-Jun-05 8:43

I have an installer with several dialogs where the user can enter information. This information is later passed into a custom action as parameters in the form of:

/username=[USERNAME] /password=[PASSWORD] /hostname=[HOSTNAME]

being passed into the CustomActionData.

The installer works fine if all of these fields are filled in, however if they are left blank the installer crashes with the error:

"Exception occurred while initializing the installation:
System.IO.FileNotFoundException: File or assembly name myLastName, or one of its dependencies, was not found"

Does anyone have any idea why this is and if I can still run this custom action with these as parameters if the fields are left blank?

Thanks,

Luke

Hiding a class in managed assembly

Member 16649158-Jun-05 5:58

Member 1664915

8-Jun-05 5:58

Hello everyone, first code project post for me.

In .NET, all classes seem to export by default, is there a way to explicitly mark a class so that it is not exported, i.e. make it invisible to
anyone who uses the assembly? I've got a couple of classes that are only used internally in my class library that the user shouldn't have to know about.

Any suggestions?

-Mathias

Re: Hiding a class in managed assembly

Ian Darling8-Jun-05 6:15

Ian Darling

8-Jun-05 6:15

Try using the internal keyword?

Ian Darling
The world is a thing of utter inordinate complexity ... that such complexity can arise ... out of such simplicity ... is the most fabulous extraordinary idea ... once you get some kind of inkling of how that might have happened - it's just wonderful ... the opportunity to spend 70 or 80 years of your life in such a universe is time well spent as far as I am concerned - Douglas Adams

Re: Hiding a class in managed assembly

Member 16649159-Jun-05 3:19

Member 1664915

9-Jun-05 3:19

Thanks a lot!
Note to Managed C++ developers:
In Visual Studio 2003 there is no '__internal' keyword equivalent to C#'s 'internal', instead one is supposed to use 'private public:' access modifiers (!?). This should be fixed in Visual Studio 2005.

Custom Dialogs for VS Installer

lukemc7-Jun-05 16:23

lukemc

7-Jun-05 16:23

I'm trying to create an installer that will prompt the user for a username and password that they want to save. Unfortunately none of the templated dialogs that are in the user interface portion of the installer setup have a password field and their properties can't be edited to have them.

Does anyone know how I would go about adding this functionality to the installer? I've read all about custom actions and what's available there, but unless I'm wrong, these aren't there as prompts to the user and only execute during/after the installation process. I'm also using C# if that makes a difference.

Any help would be greatly appreciated.

Thanks,

Luke

Re: Custom Dialogs for VS Installer

rwestgraham8-Jun-05 1:51

rwestgraham

8-Jun-05 1:51

See the article at:

http://www.codeproject.com/dotnet/setupprjpwd.asp[^]

Robert

Installer problem when deploying application

LiamD7-Jun-05 1:32

LiamD

7-Jun-05 1:32

I am using the Visual Studio 2003 Setup Wizard in the Setup and Deployment Project. I create a Setup for windows applciation. The generated output is a .msi file which I want to be able to distribute.

When I try to install a new version of my application over an existing one I get the following warning.

"Another version of this product is already installed.
Installation of this version cannot continue. To
configure or remove the existing version of this product,
use Add/Remove Programs on the Control Panel."

In the Deployment Project
DetectNewerInstalledVersion = True
RemovePreviousVersions = True

One strange thing is that if I Right Click on the Deployment Project and choose Install I do not have any problems - all installations are OK. It is only when I double click on the generated .msi file that the problem occurs.

I do not know if there is any use of it but I have Windows Installer 3.1 (the latest vesion I think)

Does anyone have any suggestions?

Thanks,

Re: Installer problem when deploying application

MoustafaS7-Jun-05 16:28

MoustafaS

7-Jun-05 16:28

The setup.exe file is the file that will check for the previous versions ,click it and it will work as well.

Re: Installer problem when deploying application

LiamD9-Jun-05 0:17

LiamD

9-Jun-05 0:17

LongHC wrote:
The setup.exe file is the file that will check for the previous versions ,click it and it will work as well

My distribution does not have the setup.exe file it only has a single .msi file.

Re: Installer problem when deploying application

rwestgraham8-Jun-05 2:23

rwestgraham

8-Jun-05 2:23

You can force a reinstall over an existing installation by doing the following:

Make sure that all newer files have a higher version number than the existing files.

Run the msi with the following command line parameters:

msiexec /i [Fully qualified path to your new msi] REINSTALL=ALL REINSTALLMODE=vomus

You can modify the bootstrapper exe to run the install with the above command line.

There are a couple of limitations to this method:

This forces your new msi to run in reinstall mode, and overwrites all existing files where the version has changed. If older files exist that are no longer needed, this method does not account for removing them, and in fact you will still need to add the unneeded files to your new msi because they need to be present so that they are entered in the uninstall log. Otherwise if your user does a complete uninstall, old files not installed by your new msi will be left on the target machine. Ditto for all other resources like registry entries, etc.

If your new install needs to get user input from dialogs, you may run into problems.

An alternative to forcing a reinstall is to modify the bootstrapper to first run the existing msi in Unistall mode, then launch your new setup. You can get the parameters needed to run an uninstall from the registry.

Finally, Windows Installer does support "true" product upgrades, which are not the same as simply trying to force a reinstall over an existing product. But if your original setup was not correctly authored with an UpgradeCode, among other things, then this will not work. Describing how to author msi's to support future upgrades, and how to author the associated upgrade msi's is beyond the scope of anything I could answer on this forum.

Robert

Re: Installer problem when deploying application

LiamD9-Jun-05 0:29

LiamD

9-Jun-05 0:29

Robert,

There seems to be a lot of good informaiton there but is beyond my understanding.

Could you point me to a tutorial/info on the installer process as used by Visual Studio. (e.g. what is the bootstrapper, how do you author installer scripts, how to access the registry setting, what other installation options do I have?)

Does this all have to be done from within Visual Studio.

Thanks,
Liam

Re: Installer problem when deploying application

MoustafaS9-Jun-05 0:40

MoustafaS

9-Jun-05 0:40

Try this http://msdn.microsoft.com/library/default.asp?url=/library/en-us/vsintro7/html/vbtskcreatinginstallerforyourapplication.asp[^]
In that website there are all the information you need.

Re: Installer problem when deploying application

rwestgraham9-Jun-05 12:09

rwestgraham

9-Jun-05 12:09

OK, the typical installation process involves first running a program called Setup.exe, AKA the bootstrapper. The bootstrapper is a program written in C++ so that it has minimalk external dependencies and should run on any system that has Windows installed.

What the bootstrapper does is to check to see if the .NET Framework is installed. If not, it installs the framework so that the target machine is now ready to run your MSI setup package. Once the bootstrapper has prepared the target machine it launches your MSI.

The source code for the bootstrapper is available, so you can modify it to run additional actions before your MSI is launched. In this case that would be probably uninstalling the existing application if it exists.

To unistall the existing application and then install your new application, you would perform the following steps:

1) Search the registry to verify the app is already installed. MSI packages are identified by a GUID known as the ProductCode. You have to determine the ProductCode for your app. If the app is installed, there will be an entry in:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\

Example. ProductCode is {FB6E8318-B7EA-4392-A7DD-D33295D158B7}. If the product is installed, you will find a registry entry at:

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\Uninstall\{FB6E8318-B7EA-4392-A7DD-D33295D158B7}

2) If the app is installed, uninstall it by running the command line:

MsiExec.exe /qb- /X[Your ProductCode]

Example:

MsiExec.exe /qb- /X{FB6E8318-B7EA-4392-A7DD-D33295D158B7}

MsiExec will return a success code = 0 when the uninstall is complete.

3) Launch your new install after msiexec has returned a success code for the uninstall.

Now, you have a couple of options on how to proceed:

1) If you are comfortable programming in C++ you can modify the bootstrapper directly to perform the above sequence.

2) If you are not adept at C++ programming, you can get by with minimal modifications to the bootstrapper. Simply change it to run a custom exe file instead of the setup msi at the end of the bootstrapper sequence. Since the NET framework will be installed by the bootstrapper, you can create a custom exe as a NET application that checks the registry, launches the uninstall, and finally runs your new setup.

To get started, you need to download the bootstrapper sample project and figure out how to proceed from there. Information about the bootstrapping process, as well as the setup.exe source code can be obtained from:

http://www.msdn.microsoft.com/library/default.asp?url=/library/en-us/dnnetdep/html/dotnetframedepguid.asp[^]

Robert

Image Button

Serenena6-Jun-05 15:27

Serenena

6-Jun-05 15:27

:(Sorry im reali new at this....i doing a project on .Net compact framwork.
can someone tell me how can i combine two image so tat i get a onmouseup and down?
im using C#....

Help

Printing address labels in .net

Dave French6-Jun-05 10:34

Dave French

6-Jun-05 10:34

I have written an application in c# and need to be able to print sticky address labels, the 21 to a page variety. Is there a correct way to do this, or is it best just to write the code to calculate the layout of the text. If this is the case is there info on the layout of these labels i can use, ie margins and label sizes to use when drawing the text

Bug when using User Controls within containers ?

MrBean6-Jun-05 3:51

MrBean

6-Jun-05 3:51

When using User Controls in a .NET Windows Forms app, the designer sometimes "activates" controls within a User Control when in design-mode, but only when the User Control have been placed within a container control (like a Panel or Groupbox).

Look at this zipped AVI movie which demonstrates the problem :
http://www.bean.dk/uctest/UCTest.avi.zip

The full source code for the example can be found here :
http://www.bean.dk/uctest/UCTest.source.zip

This would normally only be a minor thing since the bug only occurs at design-time, but I'm using .NET's designer in my own app. so the users can design forms themselves.

Is there a workaround to avoid controls within a User Control to be "activated" when the user clicks on them design-time ?

Thanks in advance,

/Bean

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.