|
hi,
You have to use XML to do this.
suppose that you click radio button and current configuration of it is "ok".
Then you have to save Radiobutton name and "true" in the XML File.
pl use System.Xml namespace for it.
after that you load application once again,You have to read current status of Radio Button and set it to radiobutton..
regards,
pubudu.
|
|
|
|
|
You have to use XML to do this
Why do you HAVE to use Xml? You COULD use Xml, you COULD use a serialised object, you COULD use a database but you certainly don't HAVE to use Xml.
Personally I have used an object serialized to the filesystem for this. It is very simple - create a class to represent all the properties of the gui you wish to store, remember to mark it as [Serializable].
When the app is unloaded fill a new instance of your "settings" object with the values from the gui and use a serializer (Xml or Binary or any type you wish) to serialize to the filesystem.
When the app is loaded do it in reverse, deserialize the file back to an object and set the properties on the GUI.
|
|
|
|
|
hi,
I have used XMLDocument to save current status of Application Controls.I haven't use Serialization or No need to use database for that.
To do serialize You also need to use XML.
regards,
pubudu.
|
|
|
|
|
IMHO J4amieC says that you presented XML as it was the *only* option. While I agree that XML is cool and XML rocks, it is not the *only* option.
pubududilena wrote:
To do serialize You also need to use XML.
Not at all. You can have binary serialization.
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
Thank you very much.
Yes, use xml or binary file can save gui configuration.
If a whole form can be serialized, it is a perfect. 
|
|
|
|
|
Hi all!
I'd like to make one of my c# apps a COM server and don't have a good idea on how to do it.
Creating a .NET dll containing a COM-visible class and calling this class from a COM client is easy and works fine, but so far I couldn't find a way to do this for a .NET executable.
When I set the output type to windows executable, the "Register for COM interop" flag is not honored.
Calling regasm works for the dll as well as the exe, though.
Instantiating a class in a COM client does work as long as the dll is registered. When I build the exe, call regasm and re-run the same COM client (a simple VBScript) I get the error 0x80070002 (file not found) when calling CreateObject().
Any idea/advise?
Thanks in advance,
mav
|
|
|
|
|
It may be possible to correct the 0x80070002 error by manually editing the registry key to use ".exe" instead of ".dll", which is likely written in by the .NET Framework during registration. However, if the framework does that, it may have issues trying to run a .exe as a COM server?
Anyway, why do you need the EXE instead of a DLL? Explain that, and we may be able to offer a better solution, while still using a dll.
John
"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.
|
|
|
|
|
Thanks, John, for taking your time!
I want an EXE because I already have an executable (a Windows Forms Application) that I want to enrich by making it a COM server.
The goal is to make methods/properties of the running instance of the application visible to COM...
Perhaps I could move all the functionality into a class library and only put the startup code into the exe itself, but then I guess I'll get a new instance of my form class when I instantiate a COM object from the class library and cannot access the running form itself.
Thanks in advance for anything you can come up with.
Regards,
mav
|
|
|
|
|
I want to be careful about my advice here. I'm not sure whether you can't do what you want with a .NET exe. However, there are some other options, if that truly doesn't work.
1.) Create a COM server in unmanaged code, but it simple passes off the work to the .exe that you have already written. (Not as much work as re-writing, but still a bit of work, I bet. You'll have to figure out how the communication would take place.)
2.) Use one or more of the different ways that you can operate multiple dll instances as if they were one shared instance (or actually share the same dll). One of the ways to handle this is with shared memory mapped files, and named events.
3.) Create an unmanaged COM server exe, and make it actually contain (wrap) your existing application. (Managed C++ would work well for this, I think.)
4.) Don't forget that you may still be able to make the .exe into a COM server.
5.) A re-think of #2 is that you could make a dll COM server, that uses sockets or interprocess communication to communicate with the .exe that you want to really use. That way, you could have multiple instances of the COM object, but they would all be communicating with the single exe, acting as one instance.
6.) Brainstorm a bit more!
John
"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.
|
|
|
|
|
Can somebody tell me how I can insert text from TextBox-es to DataGrid using C# and (InsertCommand) dhe (UpdateCommand) same time deleting from DataGrid (DeleteCommand)
HElp!!!
|
|
|
|
|
hi,
You can Update dataGrid Like this:
DataSet ds=new DataSet();
System.Data.SqlClient.SqlDataAdapter ada,dt1;
ada=Get data for adapter object
ada.Fill(ds);
this.dataGrid1.DataSource=ds.Tables[0].DefaultView;
System.Data.SqlClient.SqlCommandBuilder sqlcom=new SqlCommandBuilder(ada);
dt1=sqlcom.DataAdapter;
//Update changes in the datagrid
DataTable tt=ds.Tables[0].GetChanges();
dt1.Update(ds);
regards ,
pubudu.
|
|
|
|
|
Insert into the DataSource and Refresh() on the DataGrid
|
|
|
|
|
MY program is supposed to send a file asychronously via TCP and sockets, to this end i grab
chunks of the file and store it in a data class, which i serialize and send.This is then
deserialized and the data block is placed in the correct spot in the file by offseting the
stream to the appropriate spot.
ok to the error , this process works the first couple of types with atleast the first 2
chunks of data being recieved and placed in a file on the other side. However after that
things go pear shaped, as once one goes wrong all the remaining chunks no longer work all
giving similar errors.
1 //<< this is my sequence number i use to find offset values
0 //<< current offset in file
got to reciever
got to tryrec
2 //<< this is my sequence number i use to find offset values
1024 //<< current offset in file
got to reciever
got to tryrec
A Exception occured in file transferSystem.Runtime.Serialization.SerializationException: The
input stream is not a valid binary format. The starting contents (in bytes) are:
6C-65-2E-52-65-61-64-4C-69-6E-65-28-29-3B-0D-0A-0D ...
at
System.Runtime.Serialization.Formatters.Binary.SerializationHeaderRecord.Read(__BinaryParser
input)
at
System.Runtime.Serialization.Formatters.Binary.__BinaryParser.ReadSerializationHeaderRecord(
)
at System.Runtime.Serialization.Formatters.Binary.__BinaryParser.Run()
at System.Runtime.Serialization.Formatters.Binary.ObjectReader.Deserialize(HeaderHandler
handler, __BinaryParser serParser, Boolean fCheck, IMethodCallMessage methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream
serializationStream, HeaderHandler handler, Boolean fCheck, IMethodCallMessage
methodCallMessage)
at System.Runtime.Serialization.Formatters.Binary.BinaryFormatter.Deserialize(Stream
serializationStream)
at SocketSystem.Program.MessageHandlerServer(CSocketClient pSocket, Int32 iNumberOfBytes)
in c:\documents and
settings\rob\desktop\socketsystem\socketsystem\socketsystem\program.cs:line 274
got to reciever
my data class
[Serializable]<br />
public class DropBear<br />
{<br />
public int SequenceNo = 0;<br />
public string misc = "";<br />
public byte[] buff = null;<br />
<br />
}
---------------------------------------------------------------------------
now for my serialization code
DropBear db = new DropBear();<br />
db.buff = buffered;<br />
db.SequenceNo = filt.currSeqNO++;<br />
BinaryFormatter bf = new BinaryFormatter();<br />
MemoryStream ms = new MemoryStream();
bf.Serialize(ms, db);
Byte[] by = ms.GetBuffer();
//data sent as Byte[] << byte buffer size 10240
//file chunk 1024
----------------------------------------------------------------------------
Deserialization
MemoryStream s = new MemoryStream();<br />
s.Write(pSocket.GetRawBuffer, 0, pSocket.GetRawBuffer.Length);<br />
BinaryFormatter bf = new BinaryFormatter();<br />
s.Position = 0;<br />
DropBear db = (DropBear)bf.Deserialize(s);
-------------------------------------------------------------------
the data is sent with a network stream, i have tryed resetting the buffer at the end of
every read and before every recieve
Any input would be appreciated.
Thanks Rob
|
|
|
|
|
Before reading from the MemoryStream do
ms.Seek(0, SeekOrigin.Begin);
I was getting similar errors. This solved the problem.
|
|
|
|
|
i have a MainForm that act as a MDI container, i load the company logo as backgroundimage, but the image is load as tile mode which fill all the MDI container, is there anyway to set the background image to the center of the MDI container instead of tile?
|
|
|
|
|
the way out is little tricky...
Add another form in your application. Add picture box on it. Assign image in it. then come to your main MDI Form. and in class Declaration inherit it with this new form. and your job is done..
hope this helps
|
|
|
|
|
There is one more trick,
Form f = new Form();
Panel p = new Panel()
f.Controls.Add(p);
p.Dock = DockStyle.Fill;
p.BackGroundImage = //your image
p.BackgroundImageLayout = ImageLayout.Center;
This will work only in VS.NET 2005.
Thanks,
Alomgir
|
|
|
|
|
U could, handling the paint events of the MdiClient control. But isnt easier to just use the designer to drop a picturebox with the logo where u want it instead of using background images?
Maybe I misunderstood ur question.
|
|
|
|
|
hey all,
i have the following code
<code>
public class CustomObjectCollection : CollectionBase
{
...
public int ContainsName(string name)
{
for (int i=0; i<this.Count; i++)
{
if (this[i].Name.Equals(name) { return i; }
}
return -1;
}
...
}
</code>
is there a better way of doing that?
Kids don't try this at home!
|
|
|
|
|
Hi,
I dont see anything wrong with your code.
Seems to be perfect.
Thanks,
Alamgir
|
|
|
|
|
If I get a return from a XML web service, like this : <value>12</value>. How do I retrieve the value using XMLDocument? Thank you for your answer.
<italic>Work hard, Work effectively.
|
|
|
|
|
What do you mean you return 12?
/\ |_ E X E GG
|
|
|
|
|
I forgot. Sorry. Here:
If I get a return from a XML web service, like this : <value>12</value>. How do I retrieve the value using XMLDocument? Thank you for your answer.
<hr><italic><small>Work hard, Work effectively. </small></italic>
|
|
|
|
|
assuming you already have this xml loaded into a XmlDocument (doc) instance.
Can you show me your whole xml file hierarchy? I need it to show you a better example.... Here's what I can show you now...
XmlNode node=doc.SelectSingleNode(xpath...);
string alexEggRules=node.InnerText;
and alexEggRules will have "12" in it...
/\ |_ E X E GG
|
|
|
|
|
<NewDataSet>
<Table>
<Country>Indonesia</Country>
<City>Ujung Pandang / Hasanuddin</City>
</Table>
</NewDataSet>
Thanks Alex.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
