|
Hi Jason,
As you already know that the WebClient class in fact uses the WebRequest internally to make a connection to the remote resource, and the HttpWebRequest is just a descendant of the abstract basic WebRequest class. The way I see it is the WebClient class provides the user with an easy and simple way to connect to request data from the remote resource, because it encapsulates the basic steps which you should have to do by yourself if you use the WebRequest. However, with the WebRequest and its descendants you will have more control to handle the way to request data from the remote resource. For more information, you can see Requesting Data[^]
|
|
|
|
|
Hi,
I wrote an application that has a server application running on a machine as a console application. The problem with this is that the machine must be logged in for the program to work. The client does not want this. The console application monitors port 8080 and process's and returns data from an SQL server database.
What can I convert the server application to that would allow it to run without the computer being logged in?
Thanks.
Stephen
|
|
|
|
|
A Windows Service... check the C# programming page under Services section for some good tutorials.
[EDIT: check here[^].]
-- LuisR
Luis Alonso Ramos
Intelectix - Chihuahua, Mexico
Not much here: My CP Blog!
|
|
|
|
|
Hello,
I'm trying to print on some pre-printed receipts, where I only print the values of the fields. I get the unprintable area using GetDeviceCaps and use hundreths of an inch to position each field. Everything was working fine in my printer, but today I moved to my client's office to prepare for deployment, and when I tried to print in their laser printer, the first receipt came all right.
From then on, every receipt only printed the left half. I tried another printer, and PDF Creator, and same output.
I noticed on one of the printed sheets that the widht from the border of the page to the end of the printed area is 8.5 centimeters. It rings a bell because the page is 8.5 inches wide.
I checked the PageUnit property of the Graphics object that I use to print in my PrintPage event handler, and it's set to Display (1/75 of an inch).
I'm really  !!
So, any help??
-- LuisR
Luis Alonso Ramos
Intelectix - Chihuahua, Mexico
Not much here: My CP Blog!
|
|
|
|
|
I think I've found something that is going wrong. I explicitly set the PrintDocument.DefaultPageSettings.PaperSize property to letter before printing, and in my PrintPage handler, it is set to A4.
I during the Print dialog, I go to printer properties and change the paper to letter, it prints all right. But not automatically, even if it's set as the default paper size for the printer, and explicitly set for the document.
What still puzzles me is that the printed area is exactly 8.50 centimeters wide.
-- LuisR
Luis Alonso Ramos
Intelectix - Chihuahua, Mexico
Not much here: My CP Blog!
|
|
|
|
|
Hi,
Have anybody tried inheriting from CommonDialog class
I want to know, how to implement the RunDialog() function
in my derived class?
Thanks
|
|
|
|
|
I have a standard application with an installer that deploys to a user-specified directory. I have also written plugins to the application that can be deployed individually as required. The only problem is that the plugins need to be dropped in the same directory as the original application installation directory.
How do I write an MSI in visual studio .net that installs the plugin in the same directory WITHOUT the user having to choose the application installation directory?
Essentially, the msi's only function will be to drop a single dll into the application install directory.
|
|
|
|
|
As a first step you can check for it's path at the regisrty in :
HKLM\SOFTWARE\MICROSOFT\WINDOWS\CURRENT VERSION\UNISTALL\ [Your Application Name].
Or If you want it also to be in a specified location :
In the setup project ckeck the steps that the setup will perform and then ,delete the step that the user chooses in it the folder ,so it will be installed to the default directry : WinDir\Program Files\Your Company Name\Your Application Name\...
|
|
|
|
|
This will work only, if the main program was installed at the default location...
Regards,
mav
|
|
|
|
|
That's quite simple.
Your plugin installer will have to know the path your main app has been installed into.
You can set a registry entry during installation of your main app to hold this information by setting its value to "[TARGETDIR]".
In your plugin installation project, you can add a registry search to your start conditions that's searching for this registry entry.
If the search found a value, assign this value to a variable, e.g. MAININSTALLDIR.
Now set the default value for the installation directory to [MAININSTALLDIR] and remove the dialog where the user can choose the installation location and you're done.
Regards,
mav
|
|
|
|
|
How do i set the [TARGETDIR] after I get the value from the registry?
|
|
|
|
|
Go to the file system editor, select the application directory and enter [MAININSTALLDIR] (resp. the name for your variable) for DefaultLocation (the standard value is [ProgramFilesFolder][Manufacturer]\[ProductName], but you want the directory you found in the registry).
Regards,
mav
|
|
|
|
|
I have an Xml document which I am trying to load via XmlDocument.LoadXml(...). However, the document has é and â entities in them. How can I make the XmlDocument resolve these? Editing the original xml document is not an option.
Is there some way to give the XmlDocument a list of entities before Loading the xml document?
Thanks,
...Matt
|
|
|
|
|
The é and ê should have been é and &circ.
...Matt
|
|
|
|
|
|
Are you referring to overriding XmlValidatingReader.ResolveEntity() ?
The problem with that is that the internals of XmlValidatingReader are hidden, so I'd have to re-implement the class.
If you are referring to something else, could you provide more details please?
Thanks,
...Matt
|
|
|
|
|
hi,
I don't have access to VisualStudio right now so I can't try, but I *think* XmlValidatingReader should figure out how to expand entity from DTD by itself. Basically, XML don't have problem with numeric entities - e.g É is ok, but É is defined in DTD and when reader don't parse DTD of document, it is problem. I belive you don't have to change anything. IMO XmlValidatingReader use ResolveEntity[^] automatically.
Somebody correct me if I am wrong. 
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
The problem is that the XmlValidatingReader throws an XmlException when it sees the é since it's not defined in an entity in the Xml document nor in any DTD referenced by the Xml file. Modifying the Xml to add a DTD is not an option, since it's being downloaded from a web server beyond my control (it's an RSS feed).
So I'd like to somehow say "I know that 'é' isn't defined in the DTD, but I'd like it to be resolved by..."
I suppose I could do a pre-process step to search and replace the raw Xml data before parsing, but I'd like to find a more robust solution.
...Matt
|
|
|
|
|
Matt Houser wrote:
The problem is that the XmlValidatingReader throws an XmlException when it sees the é since it's not defined in an entity in the Xml document nor in any DTD referenced by the Xml file.
Undefined entity? Your XML is broken. (well I know it's not your faul, but I am markup purist  )
Matt Houser wrote:
So I'd like to somehow say "I know that 'é' isn't defined in the DTD, but I'd like it to be resolved by..."
I have no idea how to tell XmlValidating reader which DTD it should use, other then write it in document itself.
Matt Houser wrote:
I suppose I could do a pre-process step to search and replace the raw Xml data before parsing, but I'd like to find a more robust solution.
First idea: why not add (HTML probably*) doctype in pre-process? Shouldn't be a big deal. Plus it's more general and effective then search & replace.
* or your own doctype - just copy entity defintions from HTML DTD.
hope it helps
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
i have a windows application, is there a way to know if the capslock key is lock or not.
thx
daonlyone
|
|
|
|
|
Sure, the following is a quick example, you have to P/Invoke the call to GetKeyState. Give this a try:
[DllImport("user32.dll")]
static extern short GetKeyState(int nVirtKey);
public bool IsCapsLockOn()
{
short keyState = 0;
keyState = GetKeyState((int)Keys.CapsLock);
return(keyState == 1 || keyState == -127);
}
private void button1_Click(object sender, System.EventArgs e)
{
if(IsCapsLockOn())
{
MessageBox.Show("Caps Lock is on");
}
else
{
MessageBox.Show("Caps Lock is off");
}
}
|
|
|
|
|
|
I am trying to find out what is inside my dataset. I have inserted a break in the program and right click on the dataset when it is highlighted and open the quickwatch. I have searched the heirarchy inside the quick watch but to no avail. I am looking for some guidance on how to navigate the dataset to find out what is inside of it. I keep getting an error,"A field property with the name 'stopnum' was not found on the selected datasource." I am using a stored procedure to populate the dataset and the first field of the stored procedure I use as and name it stopnum. Any guidance would be appreciated.
Scott Moore
|
|
|
|
|
There are several techniques you could try.
* Write a little routine that can output the desired information to a file or other debug information destination. Then, comment out or otherwise remove the code when it has finished being useful.
* Use the watch window to actually call a function that can display the information you desire. With VS 2003, this is often much easier to read than running through the object's properties. But, be warned that the method will be called each time you break at a new location in the code, so pay attention to performance if that could be a problem.
* Try out the beta of VS 2005, since it is supposed to have much improved debug displays for this sort of thing.
John
"You said a whole sentence with no words in it, and I understood you!" -- my wife as she cries about slowly becoming a geek.
|
|
|
|
|
One way could be to add a datagrid and set its datasource to be the dataset you are debugging.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
