|
Good luck. The best you can do is to use rand() to get a pseudo-random number. Something like:
int x = rand() % 101;
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Here is an example for you :
#include <stdlib.h>
#include <time.h>
int main( void )
{
int i;
// Seed the random-number generator with current time so that numbers will be different every time we run.
srand( (unsigned)time( NULL ) );
// Now generate random number 0-100
i = rand()%101;
// Write out
printf("%d",i);
}
m0n0
|
|
|
|
|
if you don't care the numerical distribution within the function, use the rand()%101 as others have recommended. Pay attention to inclusive verses exclusive. rand()%101 will give you results 0..100 inclusive. rand()%99+1 will give you 1-99 range (or 0..100 exclusive).
There are no "perfect" random number generators, there is only the best for your needs. For 99.9% of random number needs, a rand()%n distribution for 0..(n-1) range is sufficient. If you have need of better attempts at uniform and non-uniform distribution random generators, you can google on the subject, or visit the boost library set.
http://www.boost.org/libs/random/index.html[^]
_________________________
Asu no koto o ieba, tenjo de nezumi ga warau.
Talk about things of tomorrow and the mice in the ceiling laugh. (Japanese Proverb)
|
|
|
|
|
Hi all,
I'm implementing a COM Server (using attributed ATL 7) running as a windows service. During the build process VC (Visual C++ .NET 2003) generates the necessary IDL code and when done it registers the service.
The service registration (which I assume is carried out by running "myserver /RegServer") fails however, and a messagebox appears stating that "The program can not be started because the some_dll.dll could not be found...".
My app uses two custom dll's and I am sure that they are in my "path" variable since it is no problem to start the application in debug mode from within VC.
If I put the dll's in my working directory though, the server registration succeeds.
Does anyone know why the registration fails if the dll's are not put in my working directory? Why does it seem as the service registration process is not searching my "path" for dlls?
/Rillbert
|
|
|
|
|
This would be my first guess: There are two paths. One for the user and one for the system. A NT service typically runs under LOCALSYSTEM account, in which case it might not have access to the 'user' path variable but it does to the 'system' path variable. Check your 'path' variable and make sure the place you want to put the DLL is in the 'path' assigned to the system.
|
|
|
|
|
hi
please tell me how can i convert hex value to normal charactor string programatically
e.g.
44,00,3a,00,5c,00,44,00,6f,00,63,00,75,00,6d,00,65,00,6e,00, 74,00,73,00,20,00,61,00,6e,00,64,00,20,00,53,00,65,00,74,00, 74,00,69,00,6e,00,67,00,73,00,5c,00,41,00,6d,00,6f,00,6c,00, 2e,00,41,00,4d,00,4f,00,4c,00,5c,00,4c,00,6f,00,63,00,61,00, 6c,00,20,00,53,00,65,00,74,00,74,00,69,00,6e,00,67,00,73,00, 5c,00,41,00,70,00,70,00,6c,00,69,00,63,00,61,00,74,00,69,00, 6f,00,6e,00,20,00,44,00,61,00,74,00,61,00,5c,00,4d,00,69,00, 63,00,72,00,6f,00,73,00,6f,00,66,00,74,00,5c,00,4f,00,75,00, 74,00,6c,00,6f,00,6f,00,6b,00,5c,00,4f,00,75,00,74,00,6c,00, 6f,00,6f,00,6b,00,2e,00,70,00,73,00,74,00,00,00
want to convert in normal string pls send me pcs of code in c++
Thanking you
Manoj Jangid
|
|
|
|
|
|
Jangid wrote:
please tell me how can i convert hex value to normal charactor string programatically
e.g.
44,00,3a,00,5c,00,44,00,6f,00,63,00,75,00,6d,00,65,00,6e,00, ...
What do you mean by "normal charactor string"? 
|
|
|
|
|
That looks like a UNICODE string. Notice the 3 sets of NUL bytes at the end... I suspect if he loaded the entire data set into a buffer and called WideCharToMultiByte, he would end up with a 'normal 'string.
|
|
|
|
|
Try this approach,It will definitely work.I have tried in my code
char _hex_buf[4] = "12A";
int _hexdata;
sscanf(_hex_buf,"%x",&_hexdata);
Regards
Pankaj
|
|
|
|
|
I have solved the 1010 compiler error unexpected EOF by deleting dependencies with *.pch files.Now I have linker error LNK2001 unresolved external symbol _winmain@16.Please help.This is my code:
int APIENTRY WinMain(HINSTANCE hInstance,HINSTANCE hPrevInstance,LPSTR lpCmd,int nCmdShow )
{
int brojevi[9];
brojevi[0]=3;
int s;
s=1;
brojevi[s] = brojevi[0];
while(s<9)
{
brojevi[s]=brojevi[s]*3+8;
s++;
}
s=0;
while(s<9)
printf("\nbrojevi[%d] = %d",s,brojevi[s]);
return 0
};)
|
|
|
|
|
This looks like it might be a Unicode problem. Change your entry point (Project --> Settings --> Link --> Output) to wWinMainCRTStartup and see if that solves the problem. See MSDN article Q125750 for more.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Hi I have an assignment to hand in shortly for which I am after some guidance. The task is to read a WAV file, request a fade in /out time for the track from the user and the do the fade by modifying the binary file then writing it as a new file I have attached my code so far but do not know how to do the fade and how to write it as a new file. Please help!
#include <stdio.h>
#include <stdlib.h>
#include <string.h>
void main ()
{
FILE *oldwav,*newwav;
char *stgfilename;
char riff[5];
char wave[5];
char fmt[5];
char data[5];
unsigned long int length, binary, stereo, mono, bits, sample, bps, bpsam, bitsps, sound, ldata;
int s, m, time, count;
float fadein, track, track1, fadeout;
/* */
stgfilename=(char*)malloc(81);
printf("Please enter the file path of your wav file\n\r");
gets(stgfilename);
oldwav=fopen(stgfilename,"rb+");
if(oldwav==NULL)
{
printf("Cannot find the file specified\n\r");
exit(1);
}
/* To start the RIFF Chunk must be determined*/
fread(riff,1,4,oldwav);
riff[4]='\0';
printf("header contains %s this is a wav file!!\n\r", riff);
if (strcmp(riff,"RIFF")!=0)
{
printf("error in header not wav file\n\r");
fclose(oldwav);
exit(1);
}
fread(&length,4,1,oldwav);
printf("The length of the wav file is %lx hex\n\r", length);
printf("The length of the wav file is %ld decimal\n\r", length);
fread(wave,1,4,oldwav);
wave[5]='\0';
printf("the format header contains %s\n\r", wave);
if (strcmp(wave,"WAVE")!=0)
{
printf("error not in WAV format\n\r");
fclose(oldwav);
exit(1);
}
/* Secondly the FORMAT Chunk must be determined*/
fread(fmt,1,4,oldwav);
fmt[3]='\0';
fmt[4]='\0';
printf("the format header contains %s\n\r", fmt);
if (strcmp(fmt,"fmt")!=0)
{
printf("error\n\r");
fclose(oldwav);
exit(1);
}
fread(&binary,4,1,oldwav);
if (binary!=0X10)
{
printf("error\n\r");
fclose(oldwav);
exit(1);
}
printf("header file contains %lx\n\r",binary);
fread(&bits,2,1,oldwav);
if (bits!=0X01)
{
printf("error corrupted file this should be 01 always!\n\r");
fclose(oldwav);
exit(1);
}
printf("Check bytes 8-9 are 01 ---> Correct 01\n\r");
fread (&stereo,2,1,oldwav);
if (stereo!=0X02)
{
printf("the file is not stereo\n\r");
}
if (stereo==0x02)
{
printf("the file is stereo\n\r");
s=2;
}
if (stereo!=0X01)
{
printf("the file is not mono\n\r");
}
if (stereo==0x01)
{
printf("the file is mono\n\r");
m=1;
}
fread(&sample,4,1,oldwav);
printf("The sample rate of the wav file is %lx hex\n\r", sample);
printf("The sample rate of the wav file is %ld decimal\n\r", sample);
fread(&bps,4,1,oldwav);
printf("The bytes per second of the wav file is %lx hex\n\r", bps);
printf("The bytes per second of the wav file is %ld decimal\n\r", bps);
fread(&bpsam,2,1,oldwav);
printf("The bytes per sample of the wav file is %lx hex\n\r", bpsam);
printf("The bytes per sample of the wav file is %ld decimal\n\r", bpsam);
if (bpsam==0x01)
{
printf("this is 8 bit mono!!\n\r");
s=1;
}
if (bpsam==0X02)
{
printf("this is 8 bit stereo or 16 bit mono!!\n\r");
s=2;
}
if (bpsam==0X04)
{
printf("this is 16 bit stereo!!\n\r");
s=4;
}
printf("the value of s is ---> %d this a multiplier for?\n\r",s);
fread(&bitsps,2,1,oldwav);
printf("the bits per sample of this wav file is %lx hex\n\r", bitsps);
printf("the bits per sample of this wav file is %ld decimal\n\r", bitsps);
/* Thirdly the DATA Chunk must be determined*/
fread(data,1,4,oldwav);
data[4]='\0';
if (strcmp(data,"data")!=0)
{
printf("error\n\r");
fclose(oldwav);
exit(1);
}
printf("third line contains %s !!\n\r", data);
fread(&sound,4,1,oldwav);
printf("length of data to follow %lx hex\n\r", sound);
printf("length of data to follow %ld decimal\n\r", sound);
/* Convert the length of the file into seconds */
time=sound/(s*sample);
printf("time of track = %d seconds\n\r",time);
/* Providing the fadein time the user requires*/
printf("INPUT TIME FOR FADEIN FROM START...\n\r");
scanf("%f",&fadein);
printf("The fade in time is %f seconds\n\n\r",fadein);
track=(fadein*bps);
printf("the fadein in bytes = %f\n\r",track);
/* Check the fadein time to make sure it is not less than or equal to zero*/
if (fadein<=0)
{
printf("error time can't be less than or equal to zero\n\r");
printf(" INPUT TIME FOR FADEIN FROM START...\n\r");
scanf("%f",&fadein);
printf("The fade in time is %f seconds\n\n\r",fadein);
track=fadein*bps;
printf("the fadein in bytes = %f\n\r",track);
}
if (fadein>=time)
{
printf("error time can't be more than or equal time of track\n\r");
printf(" INPUT TIME FOR FADEIN FROM START...\n\r");
scanf("%f",&fadein);
printf("The fade in time is %f seconds\n\n\r",fadein);
track=fadein*bps;
printf("the fadein in bytes = %f\n\r",track);
}
/* Providing the fadeout time the user requires*/
printf("INPUT TIME FOR FADEOUT TO START...\n\r");
scanf("%f",&fadeout);
printf("The fade out time is %f seconds\n\n\r",fadeout);
track1=fadeout*bps;
printf("the fadeout in bytes = %f\n\r",track1);
/* Check the fadeout time to make sure it is not less than or equal to zero*/
if (fadeout>=time)
{
printf("error time can't be more than or equal to the length of the track\n\r");
printf(" INPUT TIME FOR FADEOUT TO START...\n\r");
scanf("%f",&fadeout);
printf("The fade out time is %f seconds\n\n\r",fadeout);
track1=fadeout*bps;
printf("the fadeout in bytes = %f\n\r",track1);
}
if (fadeout<=fadein)
{
printf("THIS IS IMPOSSIBLE PLEASE CHECK YOUR FADE OUT TIME\n\r");
printf(" INPUT TIME FOR FADEOUT TO START...\n\r");
scanf("%f",&fadeout);
printf("The fade out time is %f seconds\n\n\r",fadeout);
track1=fadeout*bps;
printf("the fadeout in bytes = %f\n\r",track1);
}
/* Fade in Calculation*/
}
|
|
|
|
|
Hi All,
Can anybody suggest me "Verfication tool for c++ code" which can do following things:
1) Check whether the code is following the coding guidelines.
2) Check if there is any memory leakage
3) suggest how to improve the code in terms of performance??
I am really find it tough to search such a kind of tool. If you know something also, please suggest me.
regards,
Arpitha
|
|
|
|
|
|
Dear Alok,
Thanks a lot for replying.
This link,
http://www.codeproject.com/showcase/memoryvalidator.asp[^], gives the memory status and leakage if any.
But I wanted something which checks whether the code is following the "Coding guidelines". Can you please suggest some other link where I can download the tool for free?
Regards,
Arpitha
|
|
|
|
|
|
Dear Alok,
Thanks a lot for replying.
The link,
http://www.codeproject.com/showcase/memoryvalidator.asp[^] has tool for memory leakage. But I wanted some tool which verifies the code, ie whether it is according to "coding guidelines". Basically for code review kind of thing.
Can you please suggest some tool which I can download freely from net??
Please reply,
Regards,
Arpitha
|
|
|
|
|
Hope is your problem solved or still something left!
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
cheers,
Alok Gupta
|
|
|
|
|
I want to pass content of textbox created in web application(vb.net) to the textbox of the windows application. Please send the details as early as possible. Looking for your kind reply.
Shrinidhi
|
|
|
|
|
Hi I’m going to store a zipfile in a SQL database.
From my MFC-app I like to read the “binary contents” of a zipfile into a CString. The string is going to be added into the DB via a Web service call.
How can I Read a .zip-file to a CString and then back to a .zip-file?
_____________________________
...and justice for all
APe
|
|
|
|
|
Storing binary data in CString is not the way to go ahead... Strings are NULL terminated as you probably know, so Believe me if you look at the binary data as characters, you will encounter a NULL character before you reach the end of the file...
|
|
|
|
|
... yeah, of course. Hmmmmp...
I'm going to call a web service that later will store the zip-filein a SQL DB.
Have to think about this...
_____________________________
...and justice for all
APe
|
|
|
|
|
Click on the link below to 'My Articles' and look at my 'bugreporter' project. I've got code in there that saves files to the database and also extracts and recreates them on the fly.
My articles
www.stillwaterexpress.com
BlackDice
|
|
|
|
|
Thanks! I'm having a look at it.
_____________________________
...and justice for all
APe
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
