|
Larsson wrote:
fatal error C1083: Cannot open include file: 'stdafx.h': No such file or directory
How can I fix that?
By verifying that the file exists. Does it?
What does the statement, and any above it, look like that generates this error? What extension does the referencing file have?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
|
Does this help at all?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
I hope so.
But not this. I need help to get this problem away.
So I hope for all the help I get get.
|
|
|
|
|
I have created a simple MFC MDI application using the MFC application wizard and apparently it creates a child window when I start the application. The application I'm writing ONLY provides the possibility to open certain files. This means that I do NOT want a child window when i start the application.
Is there some way i can avoid this 'default' behaviour, without having to create child windows myself (through 'Create' or 'LoadFrame')?
Any help will be greatly appreciated.
Er zit een korstje op mijn aars.
|
|
|
|
|
I wish you luck, because I have the same problems... The text books I have don't take me far enough into the nuts and bolts of what I really want to do.
I will keep my eye on this thread
Thomas
|
|
|
|
|
Well....i found the reason for this behaviour. The 'CCommandLineInfo' class, which is commonly created in the 'InitInstance' of the 'CWinApp' derived class, contains a 'CCommandLineInfo::FileNew' command by default. You can prevent a child frame from being created by assigning a 'FileNothing' command to the 'm_nShellCommand' attribute:
<br />
CCommandLineInfo cmdInfo;<br />
cmdInfo.m_nShellCommand = CCommandLineInfo::FileNothing;<br />
ParseCommandLine(cmdInfo);<br />
Er zit een korstje op mijn aars.
|
|
|
|
|
Hi,
I encountered an refresh problem in my aplication. The aplication is an "multitabet view" aplication.It has 3 parent tabs and each tab has another 3 tabs. The problem is that when I switch between tabs the "new active view" doesn't refresh or let's say that the activwx crtl (an spread ctrl) apears for a moment and then just disappears. I tried with setting the clipchildren property but has no effect.
What can I do to fix this??? 
Thanks
|
|
|
|
|
Hi,
I encountered an problem with starting my program on windows98 platform. The error say's:
"Windows cannot run this program because it is in an invalid format!"
What did I do wrong?? Is it maybe compiled in unicode or what??? (how can I check this??)
Please help
|
|
|
|
|
Raul Simcic wrote:
I encountered an problem with starting my program
Could you tell every body which program is running. and if it your own program what api have you used to link your exe.
[Vote One Here, Complete my Survey....]
Alok Gupta
visit me at http://www.thisisalok.tk
"I Think Believe this Will Help"
|
|
|
|
|
I'm working in MFC. The program is dynamicly linked to in and has 3 different activex ctrl's but they didn't do any problem in the previous version.
|
|
|
|
|
Maybe there is virus in your machine
Vengeance is savage kind of justice
|
|
|
|
|
Raul Simcic wrote:
"Windows cannot run this program because it is in an invalid format!"
Does this message come from the OS or from your program? Does your program fail to work on all Windows 98 machines or just the one? Is it possible to reproduce the problem with a smaller program (i.e., create a new MFC program and add to it until the problem appears)? Have you recently installed Win32 or any AV software on the Windows 95 machine?
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
The message come from the OS. I tried a few win98 machines and all of them give me the same error. I will try to reproduce a smaler program with the same error (like I said the previous version worked just fine - I set the compile parameters from the previous version but nothing).
|
|
|
|
|
Hi
I am working in MFC. In my application, I wrote a thread function which continouly checks for a update in a file in one particular directory. This thread should stop when clicked on a button. I have used ReadDirectoryChangesW for getting notification of the file change. To end the thread I waited on a STOP event i.e checking for it to end the thread.
But the m_StopEvent event is not caught beacuse the control is stuck at while( ReadDirectoryChangesW) I mean it not going inside the while loop unless ReadDirectoryChangesW returns true.
UINT CheckFileUpdates(LPVOID lp)
{
//Get the document pointer
CLogViewerAppView* pView = (CLogViewerAppView*)lp;
CLogViewerAppDoc* pDoc = pView->GetDocument();
CFileException err;
CFileStatus st;
CFile::GetStatus(pView->m_LogFilePath,st);
LONG l1,l2;
CFile file;
if( !file.Open(pView->m_LogFilePath, CFile::modeRead|CFile::shareDenyNone, &err ) )
{
TCHAR szCause[255];
err.GetErrorMessage(szCause, 255);
AfxMessageBox(szCause);
return 0;
}
l1 = (LONG)file.GetLength();
file.Close();
CFile file1;
LONG size_1 = (LONG)st.m_size;
int len = pView->m_LogFilePath.GetLength()-pView->m_LogFileName.GetLength()-1;
CString dir = pView->m_LogFilePath.Left(len);
HANDLE hDir = CreateFile( dir, // pointer to the file name
FILE_LIST_DIRECTORY, // access (read/write) mode
FILE_SHARE_READ|FILE_SHARE_WRITE, // share mode
NULL, // security descriptor
OPEN_EXISTING, // how to create
FILE_FLAG_BACKUP_SEMANTICS, // file attributes
NULL // file with attributes to copy
);
FILE_NOTIFY_INFORMATION Buffer[1024];
DWORD BytesReturned;
while( ReadDirectoryChangesW(
hDir,
&Buffer,
sizeof(Buffer),
TRUE,
FILE_NOTIFY_CHANGE_SIZE, conditions
&BytesReturned, // bytes returned
NULL, // overlapped buffer
NULL// completion routine
))
{
if ( WaitForSingleObject(pView->m_StopEvent, 1) == WAIT_OBJECT_0 )
{
OutputDebugString(_T("\n KILL THE THREAD\n"));
return 0; //end the thread
}
CString fileName(Buffer[0].FileName);
fileName = fileName.Left(Buffer[0].FileNameLength / 2);
if(fileName.CompareNoCase(pView->m_LogFileName) == 0)
{
//Do the work
}
}
return 0;
}
Can anyone please help me to proceed further. I do not want to end the thraed from outside the function as it may cause memory leaks.
Thanks
Madhavi
|
|
|
|
|
The way I see is to put the wait function in the while condition with the or operator...
while( ReadDirectoryChangesW(
hDir,
&Buffer,
sizeof(Buffer),
TRUE,
FILE_NOTIFY_CHANGE_SIZE, conditions
&BytesReturned, // bytes returned
NULL, // overlapped buffer
NULL// completion routine
) || WaitForSingleObject(pView->m_StopEvent, 1) == WAIT_OBJECT_0)
{
OutputDebugString(_T("\n KILL THE THREAD\n"));
return 0; //end the thread
}
Unless it is not what you would like to do. The way I see your problem is that you want ReadDirectoryChangesW to check the directory and kill the thread if it see a change OR when the user click on the button.
|
|
|
|
|
I have traced the sample code (DDK src\storage\tools\spti)
This sample use the following procedure to write CDB to scsi device:
a. Use CreateFile function and specified path to obtain the handle of device.
b. Set each member of SCSI_PASS_THROUGH_WITH_BUFFER structure.
c. Use DeviceIoControl function and IOCTL_SCSI_PASS_THROUGH control code to write Cdb to device.
I have two questions :
1. How to map Cdb structure to Cdb array?
I want to use Cdb Structure like below:
cdb.START_STOP.OperationCode = SCSIOP_START_STOP_UNIT;
cdb.START_STOP.Immediate = 1;
cdb.START_STOP.Start = 0;
cdb.START_STOP.LoadEject = 0;
But the sample code uses Cdb array:
sptwb.spt.Cdb[0] = SCSIOP_MODE_SENSE;
sptwb.spt.Cdb[2] = MODE_SENSE_RETURN_ALL;
sptwb.spt.Cdb[4] = 192;
Is there any other way to write Cdb structure to device directly?
2. Can the Operation Code( SCSIOP_START_STOP_UNIT ) let hard disk spin down immediately?
Jesa
|
|
|
|
|
i have wiritten a activex control. I testted it using ActiveX test containser and in web application (in html). It works well.
But when include my activeX control in a dialog based application , mouse mouse events are not correctly posted to my activex control. Sometimes it posts sometimes it doesn't.
mouse down is also not posted. only when i clicked two times(not double click.one click after few seconds another click), one mouse down message is posted to my activex controls.
|
|
|
|
|
i want to get records from an SQL database, but i want the recoord to be displayed one by one. i know i should do it by surfing the records going to the next until End of File. But I also need to store the the data one by one in an array for use. Can someone please tell how to store each data in an array.
|
|
|
|
|
You can create a template(I'm not sure of the declaration syntax... so just search on msdn and you'll find...) array and then add the data in.
or
The better way I see is to create a struct and add one by one each elements to an array.
or
you can search msdn about recordset... if I remember well when you do a query in a database(for example : SELECT * FROM table) the query returns an array containing all element.
|
|
|
|
|
reenacutie wrote:
Can someone please tell how to store each data in an array.
If you are using MFC, check out the CArray class. The STL has a similar construct.
"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow
|
|
|
|
|
Can someone tell me if a modal property sheet can remain open while the control moves to the child.
I have an application where i have to display something on a new window .THe data comes from the modal property sheet but when I click on Close it clses the app .I tried using OnActivateChild but the program gave me a debug Assert failure.
Also if I have an existing modal dialog how do I change it to a modeless form??
Thanks
|
|
|
|
|
Hello all.
I cannot decide that HOW "to add text to a rectangle"
HELP ME !!!
|
|
|
|
|
What are you working on? Be more specific
<italic>Work hard, Work effectively and a bit of luck is the key to success.
|
|
|
|
|
Hello My name is Yun Hi Kim. I am a Korean. So I am sorry that my english is bad.
I am working UML application. I am using Visual C++6. It is my first application. So I cannot to do anything.
My UML application must to edit text in the shape such as ellipse and rectangle. Like as Visio(graphics diagram). How to do this.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
