|
raouls wrote:
i thought i'd just bring the last part of my post to your attention:
raouls wrote:
universal rule of thumb applies tho: ymmv - your mileage may vary
I did read that.
raouls wrote:
get as angry as you want
Oh please. You did not see my smile when I was writing? 
raouls wrote:
but it's still not going to change what i have experienced.
Been there, done that; refused to do anything in PHP again. FYI I moved from PHP to ASP.NET, not that I've been using ASP.NET and tried PHP once.
Use your PHP. No problem. Just don't talk black about ASP.NET... unless you say truth  Like if you said ASP.NET has slow first respose, because it JITs whole thing... For really small apps ASP.NET can be slower, because it's quite overkill. But it's like MySQL vs. MSSQL... First may be slower for small tasks, but second run out of gass for bigger tasks. That's waht you meant IMHO.
For what I could get angry is your statement that you don't have full control over page output. That shows you don't know ASP.NET, or that you are sane enough not to render controls by yourself. For example, my homepage runs on ASP.NET, and it's *almost* valid XHTML1.1 Why almost? Well, because of stupid designer (but that's not ASP.NET fault!) and my own laziness. No constraints from ASP.NET side. Of course, it means some more work and you are not able to use most of web controls (which is one more advantage of ASP.NET). But how does it differ from PHP? Still, you get huge advantage (.NET framework, codebehing) on back-end. I know PHP templates, but still too bad when compared to codebehind.
The bottom line is, ASP.NET is more like platform, you can use many languages (I know people who are working on PHP.NET, btw) etc. So arguments like it uses lot of JavaScript is... hmm... not full truth.
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
ASP is BASIC syntax...
PHP is C syntax...
Do the math 
It's frustrating being a genius and living the life of a moron!!!
|
|
|
|
|
WTF? he's talking about .NET... you can have C# syntax... or MC++ if you really want or even PHP[^]!  That's it.
p.s no, I am not paid by Microsoft to bash PHP I just make my living with ASP.NET... you do the math
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
Regarding the debate of which one is faster, you have to realize that people are comparing their own personal experiences. This is not a controlled situation. You could have a very simple program written in a horribly slow language versus a complex program written in a fast language and the simple program will out perform the complex one just because it has less to do. You could also have a complex program running on a fast server out performing a simple program on a slow server...There are just too many variables.
One thing to keep in mind is .net will create a virual compiled version of your application on hand. It is compiled at the first run-time and is kept until the .net file is updated. This means that you have a compiled program going up against a .php file which has to be interpreted each time it is run. This is the step which will always make .net faster than php WHEN EVERYTHING ELSE IS EQUAL.
Speed aside, you are asking which is better for web programming. In my 21 years of programming, I've learned there is no better language. There is just better use of the one you choose. Pick one and be good at it and you will always be better than people who half-ass their way through "the newest thing" - if you know what I mean.
|
|
|
|
|
Pliz help me with the hi-lighted string sql. It shows that there is an error by underlining. But i can't see any problems...
<br />
<body><br />
<%<br />
'Dimension variables<br />
Dim adoCon 'Holds the Database Connection Object<br />
Dim rsProjectdb 'Holds the recordset for the record to be updated<br />
Dim strSQL 'Holds the SQL query for the database<br />
Dim lngRecordNo 'Holds the record number to be updated<br />
Dim rs<br />
<br />
'Read in the record number to be updated<br />
lngRecordNo = CLng(Request.QueryString("password"))<br />
<br />
'Create an ADO connection odject<br />
Set adoCon = Server.CreateObject("ADODB.Connection")<br />
<br />
'Set an active connection to the Connection object using a DSN-less connection<br />
adoCon.Open "DRIVER={Microsoft Access Driver (*.mdb)}; DBQ=" & Server.MapPath("Projectdb.mdb")<br />
<br />
'Create an ADO recordset object<br />
Set rsProjectdb = Server.CreateObject("ADODB.Recordset")<br />
<br />
'Initialise the strSQL variable with an SQL statement to query the database<br />
<br />
strSQL = "SELECT Table1.studentid, Table1.password FROM Table1 WHERE studentid= &studentid& "AND" password = &password& " <br />
<br />
'Open the recordset with the SQL query <br />
rsProjectdb.Open strSQL, adoCon<br />
<br />
' Execute the SQL query string <br />
Set rs = adoCon.Execute(strSQL) <br />
<br />
'Show the contents of the table <br />
While Not rs.EOF <br />
Response.Redirect (http://www.mmegi.bw) <br />
rs.MoveNext <br />
else Response.Redirect(http://www.ub.bw)<br />
Wend <br />
<br />
'close the connection <br />
rs.Close : adoCon.Close <br />
set rs = Nothing : set adoCon = Nothing <br />
%><br />
</body><br />
</html><br />
Any help appreciated
oam
|
|
|
|
|
mpapeo wrote:
strSQL = "SELECT Table1.studentid, Table1.password FROM Table1 WHERE studentid= &studentid& "AND" password = &password& "
sure, obviously quotes are on wrong places. IIRC symbol & is in VB used for string concatenation merging. It should be like:
strSQL = "SELECT Table1.studentid, Table1.password FROM Table1 WHERE studentid=" &studentid& "AND password = "+&password&
However, this code is still far from being perfect. Read Colin's article about SQL Injection[^]
best regards,
David 'DNH' Nohejl
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
I want to put my DLLs in the application program directory but when I do that the IIS does not find them. The only place that I can place them is in \WINDOWS\SYSTEM32. I tried updating the PATH environment variable under the administrators account but that didn't do the trick, probably because IIS uses a different userid.
Any ideas on how to update this?
Thank you,
Glenn
|
|
|
|
|
Hi,
I'm writing a program in C# using .NET 2003 on IIS 6.0 and Windows/2003, that is calling some legacy code written in a .DLL. What I am seeing happen is the output files it's creating is in C:\WINDOWS\system32\inetsrv.
I do not want the files in this directory but in the application directory. I tried modifying the legacy code to specify a path but it choices to ignore it. How do I change the default directory for this application only.
Thank you,
Glenn
|
|
|
|
|
hello,
is it possibile to make a peer to peer application on pocket pc? if yes, is there any useful links or code?
Thanks in Advance
Mahmoud Manasrah
|
|
|
|
|
well i just want to show an animated gif while page is ulpoaading a file , i hav use the "visibility" of Style for a layer but the gif doesnt animate after clicking submit , any one hav any idea wats goin wrong!!! i m using PHP as server side n using 'file' field for upload.
|
|
|
|
|
if you just put the gif on a page, does it animate -- i.e. is the gif itself the problem?
have you got an onclick event on your submit button?
--
Raoul Snyman
Saturn Laboratories
e-mail: raoul.snyman@saturnlaboratories.co.za
web: http://www.saturnlaboratories.co.za/
blog: http://blog.saturnlaboratories.co.za/
linux user: #333298
|
|
|
|
|
there is no problem with gif itself, its workin fine if used on an open page, yes i hav onclick event on submit button , in the handler i set the visibility of gif to visible, but its not working  , plz help
Knowledge is Power
|
|
|
|
|
I'm new to JS, but I saw the sample code for the panelbar and it was something I've been looking for. It works ok locally, but I took the same code and threw it up on my website and it doesn't work there. In my local editor, I get an "error on line 20, object expected" on the following line:
var objTmp;
I don't know what to do with it. Currently, it's at:
http://www.compass-i.com/XPPanelbar/PanelBar.htm
Thanks
|
|
|
|
|
hi there,
it looks like you forgot to upload "/js" folder and it's content to website....
David
Never forget: "Stay kul and happy" (I.A.)
|
|
|
|
|
I did upload js, css, and images, and their contents. Any other ideas?
|
|
|
|
|
no, you uploaded it to Js foder, and you referenced it as js folder in your markup. Your server is case sensitive. Rename folder or change your markup, then it should be ok.
David
Never forget: "Stay kul and happy" (I.A.)
David's thoughts / dnhsoftware.org / MyHTMLTidy
|
|
|
|
|
 Hi,my query is this..shld enter the username (entering only the characters not even blankspaces,validation shld be done)if i enter a number in the text box it shld display an popup..and upon clicking hte "click" button i shld get a next page with a question like
Bluewhale is the world's largest animal with 2 radio buttons "yes" and "No" when i click anyof these a popup window shld appear as "thanks" and the window shld automatically close.. the "username" and whether he/she clicked "yes" or "No" shld be stored in a database..
How can i do this using Javascript..which database shld i select for easy retrival?
Plzz send the query as soon as possible..
THanks
BhuvanaSathish
|
|
|
|
|
I have a form in an ISO encoded page. I want the characters in one of the form fields to be encoded in different method. Is it possible and how? Thanks so much.
|
|
|
|
|
hi,
HTML 4.01 spec[^] doesn't seem to support "per field" encoding, however you can set encoding for content of input type="file".
does it help?
Out of curiosity, what is purpose of having one field encoded differently?
best regards,
David 'DNH' Nohejl
Never forget: "Stay kul and happy" (I.A.)
|
|
|
|
|
I want answers from different regions for questions that I post on my page. These answers will be feeded into database for statistics. The database doesn't support unicode.
How does changing the field type to file help?
|
|
|
|
|
Anonymous wrote:
How does changing the field type to file help?
It doesn't. It seems to be only case when you can set some information about content. Well you say DB doesn't support unicode... Does back-end support unicode? You can send Unicode-encoded form to server, and there convert encodings for different values and then insert them into DB. Is it possible?
David
Never forget: "Stay kul and happy" (I.A.)
|
|
|
|
|
:(i want to automatically update a file on an internet server with a file i have local,on my PC.(lets say once a week-without copying it with ftp).
i know i must use port 80,but thats all i know.can anyone please help me with some code how to do it or any ideeas?
thank you very much.
serban
|
|
|
|
|
You will need to do some type of backend upload such as asp_upload or cgi upload or something like that. What type of server are you working with (os, etc)?
|
|
|
|
|
I am working on developing a small windows program that I plan on distributing to various users. I am trying to avoid piracy of this product and have envisioned posting the program on a web server where they can go to a particular page and enter a one time code in order to start the installation of the program. I do not want the users to be able to download the setup file, but want them to be able to run the setup directly from the server which would install the necessary .exe .txt, and .mdb files on their local computer (some of which will be buried and necessary for the program to run, to assist in preventing mass file sharing.) While I know that they could of course just copy the files from their computer to another, I want to at least make it more difficult than them sending out the setup file to other users. I can handle the web setup with the one time code for download, but am not sure how to just have the setup.msi file run and begin the installation to their local machine. Most of the dialog boxes usually offer an option to Open, Save, or Cancel. Is there a way to eliminate the ability to save the setup file to the user's machine and cause the setup to run from the server?
Thanks
Marc
|
|
|
|
|
When I try the webservice sample code "hello world" in the Visual studio .net 2003, I seem always have problem on authetication or authoraztion. I just remove the "'" according to the explanation in the comment to change serveral line of comment into code. and Press F5 to debug it . or try http://localhost/webservice1/webservice1.asmx in the brower.
At first, I got an error "Access denied". I thought it may be ananymous access from ASPNET account or IUSR-XXX need administrator authorization. I put them into administrator group. But it does not work. I also put debugger users group and VS developer groups have administrator authorization. It does not work. I got some other server-side error as "The Web server reported the following error when attempting to create or open the Web project located at the following URL". I also change some setting on dedault web site of IIS as application protection to Low and put ASPNET account or IUSR-XXX, debugger users group and VS developer groups all have administrator authorization . But I do not know why. As the explanation in the help or book, it should not be so difficult.
My environment: window 2000 server, IIS 5.0 Visual studio .Net 2003.
My question is for the simpliest webservice. If i only try in the IDE, what
do I have to set?
My email address:Bretthlin@hotmail.com or linhchnn@yahoo.ca
llllhhhh
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
