|
DSLR wrote:
In the OnOff_ClickHandler event there the row MyArray2.Off(5)
The point I was trying to make was that the way you have it set up now Array1 has to have knowledge of Array2 (that it has an Off method or that it even exists) when it shouldn't need to. The events you mentioned are events of the individual controls in Array1. What I'm talking about defining a custom event in Array1 that could be handled in Array2.
Think about the System.Windows.Forms.Button class. It doesn't know or care about the Panel class or a custom user control you might put it in. It doesn't require a reference to the control that contains it or need to know the name of any methods the containing control defines. You can execute a block of code every time the Button is clicked by subscribing to the Click event, just as you've done.
Well, in Array2, you want to execute a block of code every time any Button is clicked on Array1. You should define an event, just like Button does, that notifies anyone that's interested when a Button is clicked. This doesn't require Array1 to have intimate knowledge of Array2. Note also that you shouldn't subscribe to the Click event of each Button in Array1 from Array2. That would require Array2 to have an inappropriate knowledge of Array1.
The changes I'm proposing may seem complicated at first, but they will simplify your code if they are implemented. You'll be free to change code, class names, method names, etc. without worry. The only thing you'll be concerned with is having Array1 shout to the world, "Hey, somebody clicked one of my buttons!" (firing an event) and having Array2 listen for that shout (subscribing to the event).
DSLR wrote:
.NET isn’t my thing. ...I give up
That's your choice, of course. Delegates and events aren't always the easiest thing to grasp at first glance. If you power through it, you'll be a better developer. It will take effort, but it's well worth it, IMO.
Here is a popular CodeProject article on events and delegates[^]. It may help the pieces fall into place and make what I'm saying start to make some sense.
Charlie
if(!curlies){ return; }
|
|
|
|
|
I understand what you saying
For testing I have added in form1
Public WithEvents myEvent As New Array1(New Panel) and added something to do when event is triggerd
Public Sub myEvent_Clicked(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles myEvent.Clicked<br />
MessageBox.Show("Button pressed")<br />
End Sub
To test the event I have added a button who's fireing the event in Array1
Private Sub Button1_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles Button1.Click<br />
myEvent.OnOff_ClickHandler(sender, e)<br />
End Sub
In Array1 there is the routine
Public Sub OnOff_ClickHandler(ByVal sender As Object, ByVal e As System.EventArgs)<br />
MessageBox.Show("Event routine")<br />
RaiseEvent Clicked(sender, e)<br />
End Sub
When I click button1 the event RaiseEvent Clicked(sender, e) is fired but when I click a button from the array panel with AddHandler aButton.Click, AddressOf OnOff_ClickHandler then nothing happed. I see the first message with "Event routine" appear but the second not
What's the different between a fixed button and a button from an array control?
In my opinion nothing but who am I
|
|
|
|
|
Hi all
I've downloaded a .NET library and the documentation is available as an HxS file. From my understanding after googling around, this file is compressed help that should have been installed in VS by the install file (.msi). But it hasn't. From what i found on the web, installation of the HxS is not trivial (XCopy install does no extend to help files apparently). Does anyone know of any way to either a) easily install the HxS in VS2003 or b) view it using another trick ?
are tools such as H2Reg the only way to go ?.. there's got to be an easy way to read help files ??
Note: I VS2003 installed without the MSDN help. The only installed help topics come from another library (ODP.NET) that were installed correctly from the .msi
thanks
Denevers
|
|
|
|
|
Hi everyone,
On a 3 tiered environment, WinApp will call a method from a remote machine (IIS) which loads Crystal Report document object, processes some calculations, loads datasets. Now this method should throw the report document to WinApp side so that the user can view the result on his/her Crystal Report viewer. There are almost 500 users of this Winapp. The company doesn't want to buy per user CAL for crystal reports. They want to buy per processor (for IIS box) license. The nature of the report is quite complex as the client app has to pass parameters into stored procs, stored procs returns some data. Now I need to compare row by row and column by column to find out what values got changed. And dump that result into a new dataset. Use this dataset for the report document object.
Now the question is how is this possible. I tried remoting. HOwever, doesn't look like it can handle the Report Document object and send to Win App.
Also tried web services but it is slow and will not let me do the row by row and column by column processing, as my report have 18 sub reports. When designing those reports, I am using generic datasets.
How to dynamically feed data into crysal report, avoid the expensive licensing issue plus allow the WinApp client to view the reports.
Please help. Very critical.
|
|
|
|
|
Hi all,
I'm currently trying to install a publisher policy into the GAC.
I created a .cfg file, then I used the AL.exe to create a 'publisher policy assembly' with the command
al /link:MyPublisherPolicy.cfg /out:policy.3.0.MyAssemblyName.dll /culture:de /keyfile:Key.snk /version:3.0.1.44
Everything worked fine: I could install the 'publisher policy assembly' in the GAC with no problems.
But if I delete or rename the .cfg file and then try to install the 'publisher policy assembly' into the GAC,
then I get an error message saying:
"A module specified in the manifest of assembly 'policy.3.0.MyAssemblyName.dll' could not be found."
Why does the 'publisher policy assembly' require the 'publisher policy cfg file'? I thought that the cfg was linked into the assembly?
Best Regards
Bernd Ritter
-------------------------------------------
The light at the end of the tunnel has been switched off temporarily due to budget problems...
|
|
|
|
|
Hi All,
Am creating a hash storage on the system using the following code. The following line actually creates the virtual directory with the guid name in the Documents and Settings/Administrators/LocalSettings/ApplicationData/IsolatedStorage directory...
IsolatedStorageFile isoStore = IsolatedStorageFile.GetStore( IsolatedStorageScope.User
| IsolatedStorageScope.Assembly, null, null );
Further, I create a hash.dat file in the above directory. This was working fine in the previous server. Currently, the server is changed and am facing this. Must have something to do with the system / machine settings. Have pasted the error below. Please help!
Many thanks in advance,
Susmitha.
ERROR:
Server Error in '/WeddingWarehouse' Application.
--------------------------------------------------------------------------------
Unable to create the store directory.[The system cannot find the file specified. ]
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.IO.IsolatedStorage.IsolatedStorageException: Unable to create the store directory.[The system cannot find the file specified. ]
Source Error:
Line 291: private void LoadData()
Line 292: {
Line 293: IsolatedStorageFile isoStore = IsolatedStorageFile.GetStore( IsolatedStorageScope.User
Line 294: | IsolatedStorageScope.Assembly |IsolatedStorageScope.Domain , null, null );
Line 295: if ( isoStore.GetFileNames( settingsFileName ).Length == 0 )
Source File: c:\inetpub\wwwroot\weddingwarehouse\productpage.aspx.cs Line: 293
Stack Trace:
[IsolatedStorageException: Unable to create the store directory.[The system cannot find the file specified.
]]
System.IO.IsolatedStorage.IsolatedStorageFile.nGetRootDir(IsolatedStorageScope scope) +0
System.IO.IsolatedStorage.IsolatedStorageFile.InitGlobalsNonRoaming(IsolatedStorageScope scope) +42
System.IO.IsolatedStorage.IsolatedStorageFile.GetRootDir(IsolatedStorageScope scope) +98
System.IO.IsolatedStorage.IsolatedStorageFile.GetGlobalFileIOPerm(IsolatedStorageScope scope) +208
System.IO.IsolatedStorage.IsolatedStorageFile.Init(IsolatedStorageScope scope) +37
System.IO.IsolatedStorage.IsolatedStorageFile.GetStore(IsolatedStorageScope scope, Type domainEvidenceType, Type assemblyEvidenceType) +66
WeddingWarehouse.OrderedProductHashStorage.LoadData() in c:\inetpub\wwwroot\weddingwarehouse\productpage.aspx.cs:293
WeddingWarehouse.OrderedProductHashStorage..ctor() in c:\inetpub\wwwroot\weddingwarehouse\productpage.aspx.cs:273
WeddingWarehouse.Controls.Catalog.ProductDetail.Page_Load(Object sender, EventArgs e) in c:\inetpub\wwwroot\weddingwarehouse\controls\catalog\productdetail.ascx.cs:98
System.Web.UI.Control.OnLoad(EventArgs e)
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Control.LoadRecursive()
System.Web.UI.Page.ProcessRequestMain()
--------------------------------------------------------------------------------
Version Information: Microsoft .NET Framework Version:1.1.4322.573; ASP.NET Version:1.1.4322.573
Susmitha
|
|
|
|
|
|
Not sure if this is the place for it but was wondering if anbody knew if its possible to overlay wave files at all using the .Net framework?
Would appreciate any views or opinions on this matter.
Regards
Ziggy
|
|
|
|
|
.NET 1.x contains no support for any kind of sound,
but you can read/write wave files with the BinaryReader/BinaryWriter classes, if you know how to overlay wave samples.
_________________________________
Vote '1' if you're too lazy for a discussion
|
|
|
|
|
We require to perform functional,regression,performance,load testing, along with code analysis and optimization.
Can any one pl suggest which tool is applicable for this
|
|
|
|
|
I would really like some help to figure this out.. i have to convert a string into a long(string). The FindWindow on CE requires long string in order to function.
Can this be done with the StringBuilder??
Thanks in advance...
|
|
|
|
|
Does the Shared function Int64.Parse(string) do what you want?
e.g., findwindownumber = Int64.Parse("3245235")
|
|
|
|
|
Hi,
When I try to remove am assembly from the GAC on my machine, I'm getting the following error "There was an error removing <xyz>" (XYZ is my assembly).
I'm getting it for every assembly I'm trying to delete (although it is listed properly in the Assembly List).
Could someone give me some advice on what is the problem, and how to fix it?
Thanks,
S.
|
|
|
|
|
If you're using gacutil it should tell you why there was a problem removing the assembly.
Two things I can think of off the top of my head: you don't have administrative privileges (only administrators can alter the contents of the GAC) or the assembly is part of a Windows Installer package (you can only remove it by uninstalling the package).
Stability. What an interesting concept. -- Chris Maunder
|
|
|
|
|
Hi Mike,
Thanks for your reply.
Actually, I think that the problem is a bit different.
1. I always login as administrator to my machine.
2. The assembly which is problematic is a private assembly that I developed, and I don't believe is a part of Windows Installer Package (is there a way to verify it?).
I found some trick - which is using the shell command "rd /s" from within the GAC directory, which actually deleted the assembly from the GAC (or at least I didn't see it in the GAC Viewer...), but that didn't really solved my problem - when I rebuilt my assembly through Visual Studio .NET, the build failed because it failed to regsiter the the Interop in the GAC... (although I deleted it using the "rd" command)
So - I believe there is a kind of corruption and I can't put my finger on it...
Any help is appreciated.
Thanks,
S.
|
|
|
|
|
Hi,
1.I have Listed a sample How to Install and UnInstall as Assembly into/from GAC.
2.On Console Application is an easy way to Creating as Assembly.
'Creating Assembly with Public Key Reference:
'--------------------------------------------
A) Creating 'PublicKey'
'Step into Command Prompt and do the followings...
D:\Pandian> SN -k Pair.dat
-k Generates a new KeyPair and stores it into Pair.dat file.
The file Pair.dat contains binary code.
D:\Pandian> SN -p Pair.dat Public.dat
-p Extracts the public key from the key pair in
Pair.dat and stores it in Public.dat.
The file Public.dat contains the only Unique ID.
D:\Pandian> SN -tp Public.dat > out.txt
-tp Extract Token Public Key from Public.dat file and writes into out.txt file.
'Now Public Token Key created.
'--- Code Starts
Imports System
Imports System.Reflection
Imports System.Security.Permissions
Namespace Testing
<strongnameidentitypermission(securityaction.demand, publickey:="0024000004800000940000000602000000240000525341310004000001000100cb049b6b06c49d940214a5c96919da4c5760938045f281351d8d3f99dfad9b03202848b8952447efce8a812b96ec92b9654a732cfaff55afacb379cf54a4a16221065d5d04a7f3bae600434b110d087a15ea410e4d4e3eccec7f339f967cf4c8f9a86799e2e1c23748664c81e4149b6071f005179c3fe059f6432053959344af" )="">Public Class TestingClass
Public Function TestingFunction() as string
return "Welcome to Pandian Shell"
End function
End Class
End Namespace
' The Public Key has been copied and pasted from 'out.txt' Textfile.
' Compile the Code as an Assembly as following way..
D:\Pandian> Vbc Testing.vb /t:Library /r:System.Security.dll
' Now an Assembly Created named 'Testing.dll'
'Installing the Assembly on GAC
' ------------------------------
D:\Pandian> GACUTIL -i Testing.dll
' Now our Assembly Installed on GAC.
'Uninstalling the Assembly from GAC :
'------------------------------------
' It should not deleted from GAC directly.
' Do the following proper way...
D:\Pandian> GACUTIL -u Testing
'The following result prints our DOS screen.
Number of Items Uninstalled = 1
Number of Failures = 0
'-- If feel, Now I reached your requirement.
With Regards,
PANDIAN S
|
|
|
|
|
Let's say that I develop the innerworkings of a program in a Win32 DLL (in Native C++) and I want the GUI for the application to take advantage of .NET. How would I work the connection between the two without resorting to turning the native C++ to Managed C++? 
In other words, I would like to have the .NET application to be able to access and make use of the Win32 DLL.
Happy Programming and may God bless!
"Your coding practices might be buggy, but your code is always right."
Internet::WWW::CodeProject::bneacetp
N-Tech Productions
http://www.n-tp.com/
|
|
|
|
|
First thing:
using System.Runtime.InteropServices;
along with your other using statements in the beginning of the c file..
then create a class:
<br />
public class DllWrap<br />
{<br />
[DllImport(string DllName) public static extern <br />
int/bool/string/... FunctionName(function calls);<br />
}<br />
when you have to call the function from the code:
<br />
DllWrap.FunctionName(calls needed);<br />
Hope it works for you...
Regards..
|
|
|
|
|
Thanks for your response! 
Happy Programming and may God bless!
"Your coding practices might be buggy, but your code is always right."
Internet::WWW::CodeProject::bneacetp
N-Tech Productions
http://www.n-tp.com/
|
|
|
|
|
Currently arranging sort of favorites menu.
faced some problems with the tooltips over the MenuItem.
The problem is:
I've got context menu with banch of MenuItems
that are generated dynamically.
each is MenuItem child class with few additional fields e.g. URL. this url should be displayed when i hold the mouse over item. Tried Tooltip class but can't use MenuItem with its SetTooltip method, cause menuItem is not a control class.
Q:how can i handle Tooltips over my menuItems
like in IE favorites menu?
|
|
|
|
|
As far as I can tell, there's no way you can use the standard Tooltip control with the MenuItem.
The options seem to be getting a third party control, or rolling your own ExtenderProvider control to do this.
|
|
|
|
|
when refing com dll(eg. xxx.dll),the .net dev auto generates a corresponding interop.xxx.dll,i can't understand this oddball action,why does it occur?
|
|
|
|
|
william_zhou wrote:
i can't understand this oddball action
I can't understand this oddball statement. Do you take a similar view of everything you don't understand?
Did you notice that using the COM dll you referenced isn't much different from using a .NET dll? No IUnknown, QueryInterface, CoCreateIntance, etc. Well, that's the functionality the interop dll provides. It handles conversions and marshalling between COM and .NET data types and handles the dirty work needed to use COM components with the CLR, which doesn't know COM from a hole in the ground.
There is a lot of information available on the subject, should you be interested.
Beyond (COM) Interop: Has Anyone Seen the Bridge?[^]
Calling COM Components from .NET Clients[^]
Charlie
if(!curlies){ return; }
|
|
|
|
|
thank Charlie,
you have told me what i want to know,and the more correlative information is useful to me,
thanks a lot!
|
|
|
|
|
Did Microsoft ever implement video acceleration compatablity for GDI+? or is it still software only? I remember there was some talk about this when I first started using GDI+ a couple of years ago. Just wondering if anything ever came of it.
Thanks
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
