C / C++ / MFC

18-Jan-05 1:33

Hi All,
I am new to MFC and so I thought I would set myself a small project as an exercise which is:- To read in an ASCII file from the hard disk (like the Notepad program). Then to add a button called "process" on the top row next to help. When pressed this button should process the displayed data in some way, then display the altered data on the screen. I should be able to then save that data to file.

The first part is accomplished with the helpful tutorial here

http://www.geocities.com/mcoiii2000/MFCtutorial.html to produce a simple text editor. and I have added the button to the top line

but now to manipulate....here is the task I set myself

Read in QWERTY contained in a file "ascii.txt"
All done with the created text editor. The button "process" is pushed (ok to here).

Now I want to display YTREWQ and save the file. i.e I now have a file ascii.txt containing ytrewq.
Simple? -not to me

The question, how can data from that filename be stored into an array/variable in order to be manipulated and then re displayed and saved??

Thanks for your help! Smile | :)

If I get it working I'll put it in the examples section!

Selvam R18-Jan-05 2:28

Selvam R

18-Jan-05 2:28

Hi,

If your file contains only text, you can use CStdioFile for file processing. Open the File with file path and read the content, store CString varibale.
Finally, reverse that sting and save it.

Regards,
Selvam

hugPW18-Jan-05 3:46

18-Jan-05 3:46

Thanks , I really don't understand I am so new to this.
If I have made myself clear, I have constructed a simple text editor and loaded a file called ascii.txt I have added a button which when pushed takes me to the code below. Obviously I have to add the code. I actually want to manipulate the data on the screen. Where is it stored? what is the variable called?
/////////////////////////////////////////////////////////////////////////////
// CMainFrame message handlers

void CMainFrame::Onreverse()
{
// TODO: Add your command handler code here

// I have used file>load >ascii.txt. The file contents are being displayed on the screen. Now I want to manipulate the data

// load the data displayed on the screen (qwerty)how with MFC , where is it?

// reverse it (ytrewq)-code for me to write!

// update the screen - how with MFC?

}
I can then save it to file. done with file>save

I hope that makes some sense

Thank you all for your time and help Wink | ;)

David Crow18-Jan-05 4:13

18-Jan-05 4:13

While the task is easy enough to do, I certainly would not have chosen it for my first MFC project.

I presume you have created an SDI application (using AppWizard). If so, I would derive the view from CEditView. In the handler funtion for the button, call GetEditCtrl() to get a reference to the edit control used by the view. You can then call CEdit::GetWindowText() to get the text currently displayed in the edit control. Use the function _strrev() to reverse the text. Call CEdit::SetWindowText() to write the new text. Call GetDocument()->SetModifiedFlag(TRUE) to let the document know that the text has been changed. Upon exiting, the framework should prompt you to save the changed file.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

hugPW18-Jan-05 5:19

18-Jan-05 5:19

Thank you I'll give it a go and let you know how I get on.

You are right If I knew it was going to be this difficult I wouldn't have chosen this either but I've started so I'll finish as they say Smile | :)

hugPW18-Jan-05 6:05

18-Jan-05 6:05

Nearly there!!
I have entered the code you suggest and it now looks like this
/////////////////////////////////////////////////////////////////////////////
// CReverseView message handlers

void CReverseView::OnReverse()
{

// TODO: Add your command handler code here
GetEditCtrl() ;

CEdit::GetWindowText() ;

//_strrev();

//CEdit::SetWindowText();

//GetDocument()->SetModifiedFlag(TRUE) ;

}
and I get this error message
error C2661: 'GetWindowTextA' : no overloaded function takes 0 parameters.

and subsequently for all the other items when not commented out. I presume something needs to go into the bracket?

do I declare a variable here or what happens? I want to get it correct.

Now you can see how new I am to this but I have learnt more today than in weeks of trying on my own. NB the SDI project was called reverse hence the reference
Regards Smile | :)

Thank you again for your time and help

David Crow18-Jan-05 6:12

18-Jan-05 6:12

hugPW wrote:
GetEditCtrl() ;

This should be:

CEdit &edit = GetEditCtrl();

hugPW wrote:
CEdit::GetWindowText() ;

This should be:

CString strText;
edit.GetWindowText(strText);

There are other changes to make, but see how you can fare with these first.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

hugPW18-Jan-05 6:32

18-Jan-05 6:32

Now we are really getting somewhere!
code looks like this

void CReverseView::OnReverse()
{

// TODO: Add your command handler code here
CEdit &edit = GetEditCtrl();

CString strText;

edit.GetWindowText(strText);

_strrev(strText);

edit.SetWindowText(strText);

GetDocument()->SetModifiedFlag(TRUE) ;

}

doesn't like _strrev, get this error. After that it should work!

error C2664: '_strrev' : cannot convert parameter 1 from 'class CString' to 'char *'

I was going to write my own bit of code but if the function exists I might as well use it.

Thank you I really appreciate this help.

David Crow18-Jan-05 7:04

18-Jan-05 7:04

hugPW wrote:
error C2664: '_strrev' : cannot convert parameter 1 from 'class CString' to 'char *'

The answer is in the error message. You need to figure out how to "convert" a CString object to a char * that _strrev() expects. Become very familiar with the CString class.

"Opinions are neither right nor wrong. I cannot change your opinion. I can, however, change what influences your opinion." - David Crow

hugPW18-Jan-05 7:39

Disable/Enable OK button in a property sheet

18-Jan-05 7:39

Thank you once again for all your help!
Kind Regards

Peter

Rajesh_K_Sharma18-Jan-05 1:01

Rajesh_K_Sharma

18-Jan-05 1:01

Hi,
I have a Property Sheet Class with three pages.

My question is, how can I disable/enable the OK button based on the user input on

any of the pages?

I have a Property Sheet Class with three pages.

BOOL CPropSht::OnInitDialog()
{
BOOL bResult = CPropertySheet::OnInitDialog();

CWnd *wnd=(CWnd*)GetDlgItem(IDOK);
wnd->EnableWindow(FALSE);

return bResult;
}

I have seen that OK button is disable.

I have added three pages page1,Page2 and Page3 in a property Sheet.

Now, suppose user changes something on any of the pages then in this situation OK

button should be enable.
I mean, OK button should behave like apply button.

Please provide me some idea.
Thanks!

rajesh

Re: Disable/Enable OK button in a property sheet

Selvam R18-Jan-05 2:15

Selvam R

18-Jan-05 2:15

Hi,

http://www.codeguru.com/Cpp/controls/propertysheet/article.php/c3973/[^]

Regards,
Selvam

using CDHtmlDialog for 2 html files

lirik17-Jan-05 23:52

lirik

17-Jan-05 23:52

Hi,

I am trying to use cdhtmldialog to display a html page in the resource folder, it works fine untill I want to have more than one html file.

Do anyone know how to change to the other html file while having the original one displayed? Confused | :confused:

Thanks a lot!!!

I have a Serious Problem

pubududilena17-Jan-05 22:57

pubududilena

17-Jan-05 22:57

hi all,
I am using SQLConfigDataSource(HWND hwndParent,UINT fRequest, LPCSTR lpszDriver, LPCSTR lpszAttributes) Method to configure the ODBC datasource..

The Problem is I have used the above Method Like this:-
SQLConfigDataSource(NULL,ODBC_ADD_DSN, "SQL Server\0","DSN=myfinger\0" "Server=SERVER\0" "Database=emp\0");
This working perfectly and create the DSN..
Now I want to give the DSN ,server ,Database Name as variables..

But when I create create Like this This is not working..
CString var4,v1,v2,v3;
v1="myfinger";
v2="SERVER";
v3="emp";

var4.Format(" \"DSN=%s\0\" \"Server=%s\0\" \"Database=%s\0\" ",v1,v2,v3);

SQLConfigDataSource(NULL,ODBC_ADD_DSN, "SQL Server\0",var4);
But No error When compilling the Program..But Not creating the DSN..

So please any know the correct way to show this please send me a reply...
Thanks in advance..

Re: I have a Serious Problem

David Crow18-Jan-05 4:17