Windows Forms

FirstPrevNext

Re: GDI Drawings and Erase John Ad24-Aug-08 19:44 John Ad 24-Aug-08 19:44  Hi, Please refer to the following links: Link #1[^] Link #2[^] For more information on this, you may also refer to the code written on this[^] link. This code though is not in VB. I hope this would be helpful. John Adams ComponentOne LLC. www.componentone.com Re: GDI Drawings and Erase afridy24-Aug-08 20:19 afridy 24-Aug-08 20:19  Thank you, look like what i really wanted. any question ill come back. Re: GDI Drawings and Erase [modified] afridy25-Aug-08 3:56 afridy 25-Aug-08 3:56  Hai friends, i wonder y this piece of code does not erase my rectangle drawn over the display dc. really annoying this stuffs, not works like specified when code :x) ok friends, i have drawn a rectangle on the display dc as specified in the first post, assume drawn over the system tray area. so now i use the below code to erase it. the code is perfect. but winodws does not react to it this was the successfull drawing part [code] hDisplay = CreateDCAsNull("DISPLAY", ByVal 0&, ByVal 0&, ByVal 0&) hRgn = CreateRectRgn(rt.Left, rt.Top, rt.Right, rt.Bottom) hBrush = CreateSolidBrush(vbRed) FrameRgn hDisplay, hRgn, hBrush, 3, 3 Sleep 1000 [/code] so now the rectangle is drawn and perfect. now i am erasing... hDesktop = GetDesktopWindow lngresult = InvalidateRgn(hDesktop, hRgn, False) * i though the above piece of code would be enough. since not working, i added the follwoing also. RedrawWindow hDesktop, 0&, hRgn, RDW_INVALIDATE Or RDW_UPDATENOW Not working friends. Gus pls help modified on Monday, August 25, 2008 10:36 AM Hide control inherited from a base form in a specific derived form, this at design-time ! sixadOne22-Aug-08 13:53 sixadOne 22-Aug-08 13:53  Hello everybody, My question is quite simple and i'm not sure there is a solution. But if you have any suggestions to go round, it would be great as i'm not really content of what i'm doing so far. Here is the problem : Let say you have a base form named FORM and 3 derived forms (FORM1...). On the base form you have several controls (buttons, textbox, labels, more than 10) taking all space of the form. On the derived forms you can see them all (design- and run-time) Very easy so far. Let say now that i wan't to replace a textbox by a combobox ONLY on FORM1. I add my combobox at the right place, i make my textbox non-visible by setting the property and all is ok at run-time... but not in the designer ! where i don't have the place to put my inherited textbox cause it's still visible at design-time and my form is full of controls. To make even more simple, i would like to prevent the designer from showing, in a particular derived form, a control inherited from a base form. My "solution" for the moment is to set the location property of my textbox at "1000;1000" so it is not visible in the designer. Thanks for your help S. Re: Hide control inherited from a base form in a specific derived form, this at design-time ! rtklueh23-Aug-08 4:16 rtklueh 23-Aug-08 4:16  I suspect you must have some reasons for not doing this, but wouldn't this be more straightforward if you just stripped the controls from the base form that don't actually appear on all the derived forms, and just leave a hole where these replaceable controls go? Re: Hide control inherited from a base form in a specific derived form, this at design-time ! sixadOne23-Aug-08 4:56 sixadOne 23-Aug-08 4:56  Thanks for your reply. Actually I have 8 derived forms which use 15+ identical controls. But for 1 of these derived forms, 4 controls have to be replaced. What you suggest, tell me if i'm wrong, is to remove these 4 controls from the base form and add them in each derived forms (7 here). But if i do that i'll loose the factorisation benefit for these controls. Re: Hide control inherited from a base form in a specific derived form, this at design-time ! Frank Horn23-Aug-08 9:19 Frank Horn 23-Aug-08 9:19  You could derive in 3 steps: Form1 without the 4 controls Form2 = Form1 + 4 controls type 1 Form3 = Form1 + 4 controls type 2 and 7 forms derived from Form2 Re: Hide control inherited from a base form in a specific derived form, this at design-time ! sixadOne24-Aug-08 5:31 sixadOne 24-Aug-08 5:31  Thanks Frank. That's a clean and acceptable solution since you don't have to deal with many controls on many derived forms. I simplified the example to make it clear but if i do that in my real case, i will multiply the depth of inheritance and the forms without a functional purpose. DataSet HasChanges doesn't pick up changes made by bound TextBoxes rtklueh22-Aug-08 11:13 rtklueh 22-Aug-08 11:13  I've seen this question in various forms in several places, but I have yet to see a satisfactory solution. Using .Net Framework 2, I've got a DataSet with elements bound to several TextBoxes which are scattered on several tab pages on a form. I can then change any of the TextBox texts, and the corresponding changes do appear in the DataSet. I want to enable an Apply button when any of these elements have changed. I tried to use the DataSet's HasChanges, but it will not return a 'true'. I also tried a RowChanged event on one of the DataTables in the DataSet, but it never triggered. I tried to resort to using the TextChanged event from all the TextBoxes. That almost works, but the event is raised when the binding initially sets the TextBox contents. I can tolerate that on the first tab page of my form, but the TextBoxes on the other tab pages don't get set until you initially select those tabs, and it is difficult to distinguish between a user-initiated change and the original setting. Thanks for your suggestions. Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes Mycroft Holmes22-Aug-08 20:11 Mycroft Holmes 22-Aug-08 20:11  This is what I do. Have form level boolean bLoading instantiated to True, do your binding in the formloading event, the last thing in the formload event is to set bLoading to false and turn off the save button. bLoading can also be used to short circuit the combo selection events and any selected index change events during the loading by putting If bLoading then Exit Sub/function in the event method. Never underestimate the power of human stupidity RAH Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes rtklueh23-Aug-08 3:59 rtklueh 23-Aug-08 3:59  I think I am actually doing the equivalent. I'm loading the DataSet in formload, and then I disable the 'apply' button (or 'save', etc). Then, any subsequent edits of the TextBoxes will raise their TextChanged events and I can then enable 'apply'. The problem shows up on the additional tab-pages that I have on the form. Their TextBoxes don't seem to receive the bound data until the user clicks on the tab-page, and this raises their TextChanged events. And this seems to occur after the tab-page's Enter event is raised, so I can't find a good place to re-disable the 'apply'. Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes sixadOne23-Aug-08 5:28 sixadOne 23-Aug-08 5:28  Don't know if it works, but maybe you can fire the load/enter event of each tabpages when the form is loading. All bindings should have been done after that. Or you can have a boolean for each tabpages that determines if it's the firs load or not. Not very good solutions. It's a shame you can't use events related to your datasource. Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes Mycroft Holmes23-Aug-08 13:52 Mycroft Holmes 23-Aug-08 13:52  rtklueh wrote: Their TextBoxes don't seem to receive the bound data until the user clicks on the tab-page, Interesting, I have never actually bound 1 record to multiple tab pages, I must try this to verify the event sequence. As seven suggested you could use the tab changeindex to manage the button state but it is ugly. Never underestimate the power of human stupidity RAH Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes rtklueh23-Aug-08 15:20 rtklueh 23-Aug-08 15:20  I think it's strange that I wrote my own control, sort of an editable list control thing (I don't like the DataGrid), and it seems to set the DataSet HasChanged properly (I think because my control does BeginEdit and EndEdit). I don't understand why the TextBox doesn't do as well? Like the English guy with the vacuum cleaner says, 'things just ought to work properly'. Re: DataSet HasChanges doesn't pick up changes made by bound TextBoxes rtklueh25-Aug-08 5:52 rtklueh 25-Aug-08 5:52  Thanks everybody for the comments. It looks like the 'Enter' event for each of the tab pages occurs before the controls on that page are updated from the DataSource. And it looks like the 'SelectedIndexChanged' from the tab control occurs after the updating. So, I can set a flag while any of the pages are being updated and ignore any of the 'changed' events from any of the controls during that time. Not too pretty, but it seems to do the job. Windows Service varshavmane22-Aug-08 5:08 varshavmane 22-Aug-08 5:08  Hello All, I am totally new to Windows Service. Trying to develop Windows Service that run only 4 days in a year ie 1st Jan, 1st Apr, 1st Jul and 1st Oct (Quarterly basis). I took a timer but not able to set the Interval. I need to download data from some website on these days and push that data in Database. Can some one help me in setting the timer ... Also can I debug this service to check whether its working fine... Please help me... Thanks in advance... Re: Windows Service Pavel Klocek22-Aug-08 11:15 Pavel Klocek 22-Aug-08 11:15  You don't need to create a service. It's easier to create a simple console aplication and run it at required times using windows scheduler. Pavel Re: Windows Service varshavmane24-Aug-08 19:45 varshavmane 24-Aug-08 19:45  Thanks Pavel. Would u pls give me a start for the same... Thanks again... Re: Windows Service rtklueh23-Aug-08 4:06 rtklueh 23-Aug-08 4:06  You can attach the debugger to the service after it is running, and then set breakpoints in it to stop it and look in on things. If you need to see what it is doing when it first starts up, then just add some code to your service to sleep for a minute or so to give you time to attach the debugger right after you start the service. Re: Windows Service lisan_al_ghaib23-Aug-08 12:23 lisan_al_ghaib 23-Aug-08 12:23  Hi ! Why don't you use windows scheduler to run your your program? To have debug infomation make sure that you write all needed infotmation in a file for exemple. Re: Windows Service varshavmane24-Aug-08 19:47 varshavmane 24-Aug-08 19:47  Thanks for the reply. Would u pls give me a start for the same... Thanks again... How to print data across then down in RDLC report tantja22-Aug-08 3:53 tantja 22-Aug-08 3:53  In crystal report, you can select the printing direction in Layout tab between "Across then Down" and "Down then Across." I was wonder how to do this in local RDLC report or is rdlc even have this option? Script (VBS) (WMI) To query Resultant Set of Policy (RSoP) and get security settings rocker198721-Aug-08 1:23 rocker1987 21-Aug-08 1:23  I'm looking to create a VBS that will query the RSoP and return the security settings of the system e.g. account policys, local policys, event log etc. So far with a bit of research i have this, however this seems to just display password details - min password age, lockout duration, min max length etc. strComputer = "." Set objWMIService = GetObject _ ("winmgmts:\\" & strComputer & "\root\rsop\computer") Set colItems = objWMIService.ExecQuery _ ("Select * from RSOP_SecuritySettings") For Each objItem in colItems Wscript.Echo "Key Name: " & objItem.KeyName Wscript.Echo "Precedence: " & objItem.Precedence Wscript.Echo "Setting: " & objItem.Setting Wscript.Echo Next Can anyone help me further or point me in some directions. Cheers Gary cannot invalidate() mdi child form from another Member 251239120-Aug-08 16:38 Member 2512391 20-Aug-08 16:38  I am trying to invalidate one mdi child form from another to call PanelDraw.Paint- basically refreshing one form based on user input from another (using VB.net 2008). The form I'm trying to refresh/invalidate is called "GraphicsViewer" and I'm currently using GraphicsViewer.Invalidate() GraphicsViewer.Update() from the user input form. The GraphicsViewer form seems to be updated but the panel does not actually get refreshed until the GraphicsViewer form is minimized then maximized again. I am not finding a solution online- is it possible to do this? I have tried using GraphicsViewer.TopLevel = True before calling Invalidate() with no luck. Re: cannot invalidate() mdi child form from another led mike21-Aug-08 5:12 led mike 21-Aug-08 5:12  Member 2512391 wrote: I am trying to invalidate one mdi child form from another That would be a Bad Practice or Bad Design. See Model-View-Controller[^] where one principle is that Views should not be coupled. led mike

Last Visit: 31-Dec-99 18:00     Last Update: 8-Jun-24 5:35 Refresh ᐊ Prev1...155156157158159160161162163164 Next ᐅ

General    News    Suggestion    Question    Bug    Answer    Joke    Praise    Rant    Admin   

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.