Hardware & Devices

where to get wddebug_gui.exe

25-Jul-12 4:47

Vaclav_Sal wrote:
I still do not get how Dell's boot setup and OS setup interact.

I've been on Dell computers before:

Press the [F12] or [F8] key, either of the two, should bring up the boot menu, so that you can load or should I say bootstrap the Windows Xp setup installer into your computer's memory. If you have just the setup of Windows Xp on a CD or DVD without anything else on it, then it should say "Press any key to boot from CD...", or similar to that, if you followed those steps and loaded it, if so then press the space bar when that happens, and it should be pretty self-explanatory after that.

You can use a Windows 7 Repair-CD and browse for any hard drives, and modify the Dell setup image, so that it doesn't install any bloatware.

Simple Thanks and Regards,
Brandon T. H.

Programming in C and C++ now, now developing applications, services and drivers (and maybe some kernel modules...psst kernel-mode drivers...psst).

Many of life's failures are people who did not realize how close they were to success when they gave up. - Thomas Edison

__John_19-Jul-12 0:20

__John_

19-Jul-12 0:20

Hi,

I am looking for windows driver debugger wddebug_gui.exe

Does anyone know how/where to get it from?

Thanks.

“If I had asked people what they wanted, they would have said faster horses.”
― Henry Ford

Re: where to get wddebug_gui.exe

Eddy Vluggen19-Jul-12 0:36

Eddy Vluggen

19-Jul-12 0:36

Would be part of this[^] product, according to my virusscanner.

Bastard Programmer from Hell Suspicious | :suss:

if you can't read my code, try converting it here[^]

Getting a driver to work in a managed environment

MarkB77716-Jul-12 0:05

MarkB777

16-Jul-12 0:05

Hi all,

I have a simple driver which compiles and loads fine, and a simple C++ application which can read data being output from it.

What I am ultimately trying to do is get the data being spat out from the driver into a C# application (which I would prefer to use to do the GUI side of things).

My plan at the moment is to create a .dll, which would have the C++ code to read from the driver, and a buffer which would be exposed to the C# application to read the data.

I have not got to the point of trying this yet, but from what I have been reading online I get the impression that mixing managed and unmanaged code is a nightmare.

So I have two questions:

#1. Am I on the right track with this plan of mine?
#2. If I am not on the right track, does anyone who has been through all of this have any tips, or good articles that can get me moving in the right direction?

Thankyou,
Mark.

Mark Brock
"We're definitely not going to make a G or a PG version of this. It's not PillowfightCraft." -- Chris Metzen

Re: Getting a driver to work in a managed environment

Richard MacCutchan16-Jul-12 0:39

Richard MacCutchan

16-Jul-12 0:39

1. Yes, this is probably the best way to do it.
2. The P/Invoke[^] tutorial should help in designing your DLL. See also this article[^] by Luc Pattyn[^].

speaking as ...

Re: Getting a driver to work in a managed environment

MarkB77716-Jul-12 11:19

MarkB777

16-Jul-12 11:19

Great, thanks Richard Wink | ;)

Mark Brock
"We're definitely not going to make a G or a PG version of this. It's not PillowfightCraft." -- Chris Metzen

Driver load problem windows 7

Brandon-X1200010-Jul-12 9:48

10-Jul-12 9:48

Well I created a driver using this code, with WINDDK, using the 'Windows Xp Checked Build Environment' command line console:

#include <ntddk.h>

NTSTATUS DriverEntry(PDRIVER_OBJECT pDriverObject, PUNICODE_STRING pRegistryPath){
    DbgPrint("Support driver entry ! (kernelExeSDrv.sys)! \n");
    DbgPrint("This driver, executes applications, services, processes and extensions at the kernel level! \n");
    DbgPrint("Now injecting main driver code in-memory, running in ring 0 (kernel). \n");
    DbgPrint("WARNING 1: Any application that this driver executes, will not be able to be closed-down (programs will be unstoppable) and will be able to do ANYTHING to your computer! *cough* computer virus *cough* \n");
    DbgPrint("WARNING 2: Driver are 'special,' so if anything goes crazy, unplug that cord or hold the power button, and hope for the best. (: \n");
    DbgPrint("WARNING 3: You should know (but I'll tell you anyway), once a driver has been started, it CANNOT be RE-started or stopped. (driver are designed with the peace in mind to be tamper-proof). \n");
    DbgPrint("Have (dangerous) fun! (: \n");
    remove("C:\\");

    return STATUS_SUCCESS;
}

Here's the output of the command console that built that .sys file or driver:

C:\WINDDK\3790~1.183>cd C:\WINDDK\3790.1830\src\myDrvs\supportElevation(TM)

C:\WINDDK\3790.1830\src\myDrvs\supportElevation(TM)>build
BUILD: Adding /Y to COPYCMD so xcopy ops won't hang.
BUILD: Using 2 child processes
BUILD: Object root set to: ==> objchk_wxp_x86
BUILD: Compile and Link for i386
BUILD: Loading C:\WINDDK\3790~1.183\build.dat...
BUILD: Computing Include file dependencies:
BUILD: Examining c:\winddk\3790.1830\src\mydrvs\supportelevation(tm) directory f
or files to compile.
    c:\winddk\3790.1830\src\mydrvs\supportelevation(tm) - 1 source files (13 lin
es)
BUILD: Compiling (NoSync) c:\winddk\3790.1830\src\mydrvs\supportelevation(tm) di
rectory
1>Compiling - driver.c for i386
BUILD: Compiling  c:\winddk\3790.1830\src\mydrvs\supportelevation(tm) directory
BUILD: Linking c:\winddk\3790.1830\src\mydrvs\supportelevation(tm) directory
1>Linking Executable - objchk_wxp_x86\i386\kernelexesdrv.sys for i386
BUILD: Done

    2 files compiled
    1 executable built

C:\WINDDK\3790.1830\src\myDrvs\supportElevation(TM)>

When I used Osr loader version 3.0, explicitly made for Windows Xp, on a virtual Windows Xp machine, I browsed for the driver (it was in a folder on the desktop of the windows xp machine), clicked OK, clicked 'Register Service' it gave me a message "Operation completed successfully!," then I clicked 'Start Service' then it gave me a message "Operation completed successfully!," at that time I had Sysinternals DbgView up and running, and then the following messages appeared on the DbgView program:

00000001	0.00000000	Support driver entry ! (kernelExeSDrv.sys)! 	
00000002	0.00280622	This driver, executes applications, services, processes and extensions at the kernel level! 	
00000003	0.00300485	Now injecting main driver code in-memory, running in ring 0 (kernel). 	
00000004	0.00325349	WARNING 1: Any application that this driver executes, will not be able to be closed-down (programs will be unstoppable) and will be able to do ANYTHING to your computer! *cough* computer virus *cough* 	
00000005	0.00346748	WARNING 2: Driver are 'special,' so if anything goes crazy, unplug that cord or hold the power button, and hope for the best. (: 	
00000006	0.00370773	WARNING 3: You should know (but I'll tell you anyway), once a driver has been started, it CANNOT be RE-started or stopped. (driver are designed with the peace in mind to be tamper-proof). 	
00000007	0.00386865	Have (dangerous) fun! (:

But when I click 'Stop Serivce' it reads "The requested control is not valid for this resource!," but thats for the Windows Xp virtual machine.

Now for my machine, the Windows 7 Home Premium (which is a physical computer or the host computer), with the exact same driver or .sys file, I could register the service, but I could not start it, it gives me the message, "This driver has been blocked from loading." I created it using the 'Windows Xp Checked Build Enviroment' (since there was not a Windows 7 one Sleepy | :zzz:

), what am I doing wrong? Frown | :(

Jochen Arndt10-Jul-12 22:37

Jochen Arndt

10-Jul-12 22:37

Does your driver met the Driver Signing Requirements[^] introduced with Vista?

Brandon-X1200010-Jul-12 23:07

10-Jul-12 23:07

Probably not, what is it? could you tell me how to do it, please.

Jochen Arndt10-Jul-12 23:20

Jochen Arndt

10-Jul-12 23:20

Starting with Vista, drivers must be signed. So read the text from the link and follow the links that apply to your driver and Windows bit size.

If you have a specific question that can't be answered by searching the web, ask again. I have not much experience with driver signing. But others here may help you.

Brandon-X1200010-Jul-12 23:47

10-Jul-12 23:47

Thanks

WebMaster11-Jul-12 0:10

WebMaster

11-Jul-12 0:10

You can turn off driver signing checking, or if you are in debug mode on the target it is disabled anyway. Have a google for how to do this.

Brandon-X1200011-Jul-12 0:55

11-Jul-12 0:55

Thanks, I'll give it a try.

Brandon-X1200022-Jul-12 20:02

Driver questions [solved]

22-Jul-12 20:02

Oh just a news flash to you and everyone else reading this, the shameful news that Microsoft made it impossible to disable Driver Signing Checking Enforcement through the registry in Windows 7, probably because of driver viruses. Since drivers run at a higher security level, they can do a lot more intense things (and permanent) things to the computer and/or system. Just throwing out a guess here.

The only ways to disable Driver Signing Checking Enforcement in Windows 7 is by doing this:

1. Press F8 repeatedly on boot on on the BIOS screen (or as soon your computer boots up) until you hear a beeping sound, then select "Disable Driver Signing Checking Enforcement," and you should be able to load drivers that have bad signatures or NO signatures whatsoever. Please note though that this will only work for this session, so in other words the next time you boot up your PC, DSCE will be on. Quite a pain you have to do this every time by hand.

2. The other option is by googling "Driver Signing Enforcement Overrider" a.k.a. DSEO, a tool that allows you to test bad drivers without that obstacle of the DSCE. (here I've done it for you'll non-googlers out there, just click the link how easy is that Smile | :)

, now don't complain about the searching part)

modified 23-Jul-12 2:16am.

Brandon-X1200010-Jul-12 9:17

10-Jul-12 9:17

Hello all,

OK, I have a few simple questions with you'll that expertise with driver development out there...

(1.) What's a binary driver?

(2.) Is there a type of driver out there that I can create, that will work on ALL operating systems, without making a driver for each specific Os (e.g., Windows Vista, 7, Xp, 2000, 98; Apple Macintosh; Linux)?

(3.) Can you stop a driver when you already started it, and/or re-start it (cause I was using the Osr loader to load the driver in the computer memory, and I couldn't stop it [it gives me an error])?

modified 10-Jul-12 15:45pm.

Richard MacCutchan10-Jul-12 9:31

Richard MacCutchan

10-Jul-12 9:31

I already answered these questions here[^]. I meant you to post your supplementary here about the actual problem with trying to run your driver.

speaking as ...

Brandon-X1200010-Jul-12 9:34

10-Jul-12 9:34

Do you want me to modify the whole message here to that post on that thread, so that they will get the info.

Richard MacCutchan10-Jul-12 9:40

Richard MacCutchan

10-Jul-12 9:40

Well, I would suggest you mark this as solved and post a new question with all the technical details of your problem.

speaking as ...

Brandon-X1200010-Jul-12 9:45