|
Thank you so much! on both answers!
You are a life-saver.
|
|
|
|
|
I'm trying to use the following code to create a backup set that would store the backup as 20040608.bak
USE master
GO
DECLARE @curdate as INT
SET @curdate = (SELECT CONVERT(char(12), GETDATE(), 112))
EXEC sp_addumpdevice 'disk','MyNwind_1', 'c:\Program Files\Microsoft SQL Server\MSSQL\BACKUP\' + @curdate + ".dat"
-- Back up the full MyNwind database.
BACKUP DATABASE MyNwind TO MyNwind_1
I'm getting the following error
Server: Msg 170, Level 15, State 1, Line 4
Line 4: Incorrect syntax near '+'.
Why am I unable to concat the @curdate tot the string
|
|
|
|
|
Just a guess, but is it since you have @Curdate defined as an Int, and you're attempting to do a string concatenation on it?
Like I say - just a guess, but would personally try CASTing or CONVERTing @CurDate first....
BTW - there is also no need to create the dump device first - you can use the syntax:
<br />
BACKUP DATABASE NWind TO DISK='c:\Program Files\Microsoft SQL Server\MSSQL\BACKUP\'....<br />
"Now I guess I'll sit back and watch people misinterpret what I just said......"
Christian Graus At The Soapbox
|
|
|
|
|
".dat" may need to be changed to '.dat' depending upon your SQL Configuration.
|
|
|
|
|
try this:
USE master
GO
DECLARE @curdate as char(8)
DECLARE @filePath as varchar(1024)
SET @curdate = (SELECT CONVERT(char(8), GETDATE(), 112))
SET @filePath = 'c:\Program Files\Microsoft SQL Server\MSSQL\BACKUP\' + @curdate + '.bak'
EXEC sp_addumpdevice 'disk','MyNwind_1', @filePath
There are a couple of problems with your code. First, as already stated, you're trying to add an int to a varchar, which would cause problems. This isn't the error you're getting, but it would have been the next.
When you pass parameters into a proc via EXEC, you have to pass constants or variables. You can't pass expressions that must be evaluated. ("Path\" + @file + ".bak" would be an expression.)
Grim (aka Toby) MCDBA, MCSD, MCP+SB
|
|
|
|
|
Thank you all for the comments and support. I'm new to T-SQL. Need hours and hours of practice 
|
|
|
|
|
I use C++, COM,
so sample from VB is good.
first- I need to enumerate SQL servers on network,
Especially interesting now:
and secondly to enumerate data bases within some SQL server,
how to do it?
Thanks.
|
|
|
|
|
|
When iam extracting a date from SQL Svr 7 and i want it to be in a specific format, isn't there a SQL command that will do the formatting?
system date '2004-06-09 13:43:41.363' i want this date in 'mm\dd\yy' format
If so, could you give me the syntax and the associated style codes.
Thanks
syed saba
|
|
|
|
|
this works on 2000
check it on 7 :
select convert(varchar(10),DateValue,1)
|
|
|
|
|
I concur with hspc. There are about 20 options for formatting the date. Look at the help on convert in SQL which will give you the parameters and examples.
Michael
I firmly believe that any man's finest hour, the greatest fulfillment of all that he holds dear, is that moment when he has worked his heart out in a good cause and lies exhausted on the field of battle - victorious.
Vince Lombardi (1913-1970)
|
|
|
|
|
Hi,
I have a question. I'm inserting a row into a table in Access DB (without using the command builder), one of the coloumns (the primary key, actually) in the table is an AutoNumber - which gets updated when I insert.
Does anyone know how can I get the coloumn's value?
thanks!
|
|
|
|
|
SELECT @@IDENTITY works for Access 2000 and later.
Edbert P.
Sydney, Australia.
|
|
|
|
|
Thank you so much! on both answers!
|
|
|
|
|
Hi ..
please see the code below..
I have two tables Centrals and Devices both having Central_Id as a common field..I am able to display the Centals table value in the first datagrid (dataGirdCentral).However on click of each cell on the central_id i want the corresponding entries of Devices table to be shown in the 2nd datagrid dataGridDevices..how do i do that...
private void loadCentralDevices()
{
ds = new DataSet();
//Getting schema of Centrals table
DataTable centralDt = new DataTable("Centrals");
String query = "Select * from Centrals";
OleDbDataAdapter da = new OleDbDataAdapter(query,ConfigurationSettings.AppSettings["MsAccess_ConnectString"]);
da.FillSchema(centralDt, SchemaType.Source);
ds.Tables.Add(centralDt);
//Getting schema of Devices table
DataTable deviceDt = new DataTable("Devices");
String query1 = "Select * from Devices";
da = new OleDbDataAdapter(query1,ConfigurationSettings.AppSettings["MsAccess_ConnectString"]);
da.FillSchema(deviceDt,SchemaType.Source);
ds.Tables.Add(deviceDt);
DataRelation dr = new DataRelation("Central_Devices_Relation",
centralDt.Columns["Central_ID"], deviceDt.Columns["Central_Id"]);
ds.Relations.Add(dr);
//create a dataview of the data
DataView centralVw = new DataView(ds.Tables["centralDt"]);
//giving access to Centrals table
centralVw.AllowDelete=true;
centralVw.AllowEdit = true;
centralVw.AllowNew = true;
//set the grid source to the author view
dataGridCentral.DataSource = centralVw;
//hook up the event handler
dataGridCentral.CurrentCellChanged+= new EventHandler(this.dataGridCentral_CellChanging);
}
private void dataGridCentral_CellChanging(object sender, EventArgs eArgs)
{
????? what do i write here to get the corresponding values?
}
Breath dot net
|
|
|
|
|
Hi All,
I have an issue with inserting new rows into a typed dataset. The dataset has two datatables (e.g. Order, OrderDetails). Both tables have a primary key (not nullable) and there is a foreign key constraint (and relation) between the OrderDetails and Order datatable.
The problem comes when trying to insert a new row into the Order (parent) table. Because I haven't been to the DB to get the next sequence number (i'm using Oracle), there is no value on the primary key. Obviously I can't add this row to the datatable unless i turn constraints off which I don't want to do. I also don't want to have to go to the database everytime I add a new row to the datatable as it could result in a stack of roundtrips to the database (each orderdetail insert would require another round trip)
Surely there is another way that I'm not aware of? What would be good is that for any new rows that are created, I put a GUID or something in the PK which would allow me to insert and relate child rows etc.. but I don't know if this is even possible or if it's best practice.
Thanks in advance for any help!
|
|
|
|
|
I updated the parent table for my application before using the PK as FK for the child table, but you might want to try this:
There is a property called DataRow.SetParentRow that sets the parent row for the child table.
I always specify this property before I update the child table, e.g.
<code>parentRow.Key = KeyValue
parentRow.Field1 = Value1
parentRow.Field2 = Value2</code>
<code>childRow.Key = parentRow.Key
childRow.Field1 = Value1
childRow.Field2 = Value2
childRow.SetParentRow(parentRow)</code>
This might help you link the two tables along with Key Fields and Foreign Key Fields setting in the dataset.
Remember that you need to update the parent table before the child table for insertion.
I hope it helps.
Edbert P.
Sydney, Australia.
|
|
|
|
|
Hi, I am debugging a COM Dll that uses ADO thru smart pointers (#import) and when recordsets are used, they were being Released with Release (); I have used recordsets in the past thru smart pointers and always used to call Close (); and then assign NULL to the recordset pointer,
so what I did with the "recordset->Release ();" lines was to change them to: "recordset = NULL;", but I wonder if I should explicitly Close them?
does anybody know how this should be? thanks a lot,
Nemike
Nemike
|
|
|
|
|
i have add reporting services to my production machine and the home page does not display its toolbar so i can not manage my reports? why do i not have a toolbar in my reporserver?
|
|
|
|
|
How to add/change/read GUID data type field  on SQL server with ADO (C++)
|
|
|
|
|
use ado or ado.net to complete a etl tool, is it feasible?
I use visual C++.net, everybody, what do you think which develop tool is better? ado or ado.net?
give me some advice! thank you!
|
|
|
|
|
Hello,
Interestingly enough, I am working on an ETL tool using ADO.NET and SQL Server at the moment.
So far so good though the system is still in its infancy. And I'm learning as I go so keep in mind there may be better ways to do things other than I have done it.
Our system is focused on batch processing and so far I've run into the following with ADO.NET
1. Using DataSet for batch processing may not be viable on large tables because it uses up a lot of memory.
2. Using DataReader for batch processing large tables is great but you are not able to update the records in batch once you are done.
3. You could perform updates while you are traversing the datareader, but this results in a lot of network traffic while processing.
I'm currently trying to figure out a good way to batch the updates so that I can send them back to the database in chunks but havent figured out how I'm going to do that yet.
Hope this helps. I haven't tried using ADO through interop so I can't comment on effeciency comparison between the two.
|
|
|
|
|
Hi:
I have a small issue with Oracle Ref Cursor in dealing with a generic DAL (Data Access Component) component.
I am currently developing a generic Data Access Component targetting SQLServer, Oracle and DB2.
Only for Oracle Stored Procedures dealing with REF CURSORs, I am not able to make a mapping to a corresponding .NET DataType. The DAL can deal only with .NET datatype.
Please suggest me some workarounds to deal with this issue.
The provider is ODP.NET and Oracle 9.1 server. .NeT Framework version is 1.1
Deepak Kumar Vasudevan
Personal Web: http://www24.brinkster.com/lavanyadeepak/default.asp
I Blog At: http://deepak.blogdrive.com/
|
|
|
|
|
Hello, I have an access db that uses a recursive structure to store data i.e. there is a parts table (but there are three levels in the structure feature bill, level1 package, and then parts but they are all considered a part in the database I am extracting the nesting ability from an attribute in the parts table called style. Depending on the value of style i.e. style = 0 its a part, style = 1 it is level1package and style = 2 it is a feature bill) I am trying to generate a report that will show me for every feature bill, what level1 packages are in it and what parts are in each one of those packages. So I am essentially showing all the hierarchical levels of nesting. I am attempting to do this buy using a dataset that has multiple instances of my packages table(packages table is essentially the child element of the parts table) and linking the child node to the parent node each time until I reach the maximum amount of nesting I want. Can anyone help me out with setting up the dataset correctly? I am running into the following error:
:System.Data.ConstraintException: Failed to enable constraints. One or more rows contain values violating non-null, unique, or foreign-key constraints.
at System.Data.DataSet.FailedEnableConstraints()
at System.Data.DataSet.EnableConstraints()
at System.Data.DataSet.set_EnforceConstraints(Boolean value)
at System.Data.DataTable.EndLoadData()
at System.Data.Common.DbDataAdapter.FillFromReader(Object data, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords, DataColumn parentChapterColumn, Object parentChapterValue)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable, IDataReader dataReader, Int32 startRecord, Int32 maxRecords)
at System.Data.Common.DbDataAdapter.Fill(Object data, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, Int32 startRecord, Int32 maxRecords, String srcTable, IDbCommand command, CommandBehavior behavior)
at System.Data.Common.DbDataAdapter.Fill(DataSet dataSet, String srcTable)
I am not sure how to fix the problem and any help would be greatly appreciated, thanks in advance!
Frank
|
|
|
|
|
Hi all,
Is it possible to get a return value from an Insert Query.
Like
Dim oCmd as OleDBCommand
Dim oConn As OleDBCommand
Dim sCommand as string
sCommand = "INSERT INTO MyTable (ID, MID, Person VALUES (1256, 'Joe Doe')
'Return the New ID number ?
oCmd = New OleDbCommand(sCommand, oConn)
oCmd.ExecuteNonQuery()
The table has a autonumber Column "ID".
When I Add a new row I want now the new ID number
Thanks, 
|
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
