C# Discussion Boards - CodeProject

MeterMan6-May-04 13:25

MeterMan

6-May-04 13:25

Ok trying this DirectX sound with a no go. I installed the sdk. I clicked on the sample file and opened it up. when i go to compile it can't find Microsoft.DirectX or anything in refernece to directX. So I did a search for the dll and added the reference to the project. Now it compiles but i get filenot found exception on the example Frown | :(

Any idea do i need to uninstall directx and reinstall again?

Win32newb
"Programming is like sex, make one mistake and you have to support it for a long time"

Heath Stewart6-May-04 17:57

6-May-04 17:57

You need to install the Managed DirectX runtime. When you install the SDK, this is not installed. There is a sub-directory of your SDK directory (something like C:\DX90SDK\Developer Runtime\Managed DirectX\Debug) that contains the managed install. This installs the DirectX managed assemblies into the GAC (so they're found at runtime) and adds the install folder to the HKLM\Software\Microsoft\.NETFramework\AssemblyFolders registry key so that VS.NET can find them. Remember, assemblies used during design time don't necessary mean they'll be used at run-time. It's all about how assemblies are resolved.

Take, for example, all the FCL assemblies. While at run-time the assemblies in the GAC are used, at design-time VS.NET (or even the C# compiler, csc.exe with the default response file) use the assemblies in the %WINDIR%\Microsoft.NET\Framework.v<version> directory.

Microsoft MVP, Visual C#
My Articles

MeterMan6-May-04 19:46

MeterMan

6-May-04 19:46

Well thanks for the help but DirectX doesn't want me to learn it evidently.
The samples DO not work. I constantly get the error I describe. I did exactly waht you said I installed the sdk. I then ran the msi to install the managed directx. i then go to vs.net and click on directx wizard and it crashs saying it needs microsoft.directx.dll.
I even try it without the wizard and run the samecode compile and then run, and i get the same exact error. Its obviously a problem cause I have seen it all over the net but i can't seem to find a solution. They basically say the same thing are you but its simply not working for me.

Win32newb
"Programming is like sex, make one mistake and you have to support it for a long time"

Heath Stewart7-May-04 3:08

7-May-04 3:08

If it's not finding the assembly, then go to the Managed DirectX runtime directory (usually in %WINDIR%\Microsoft.NET\Managed DirectX and run gacutil.exe /i on the assemblies you find in there. This will install them into the GAC so that they can be resolved by the CLR.

Microsoft MVP, Visual C#
My Articles

Diffgram Updates

MrJJKoolJ6-May-04 7:31

MrJJKoolJ

6-May-04 7:31

Hi Heath,

Here is the start of my webservice Update method. How does this look? Did I leave anything out? Can I use messagebox object inside a webservice? If this is running on the server it wouldn't be viewable to client correct?

<br />
<br />
public bool UpdateDB(dataset dsDiff)<br />
		{<br />
			    string sSQL;<br />
			<br />
			    sSQL = @"SELECT * From MidnightReadings";<br />
			<br />
			    SqlConnection myCon = new SqlConnection("user id=username;" + <br />
				    "password=password;server=localhost;" + <br />
				    "Trusted_Connection=yes;" + <br />
				"database=database; " + <br />
				"connection timeout=30");<br />
<br />
				UpdateDB = false;<br />
			<br />
			try<br />
			{<br />
				SqlDataAdapter da = new SqlDataAdapter(sSQL,myCon);<br />
				SqlCommandBuilder cb = new SqlCommandBuilder(da);<br />
				cb.GetInsertCommand();<br />
				cb.GetUpdateCommand();<br />
				da.Fill(dsDiff,"MidNight");<br />
			    da.Update(dsDiff);<br />
<br />
			}<br />
			catch(SqlException e)<br />
			{<br />
				string errorMessage = "Message: " + e.Message + "\n" +<br />
					"Source: " + e.Source + "\n" +<br />
					"State: " + e.State + "\n" +<br />
					"Procedure: " + e.Procedure + "\n";<br />
<br />
				System.Diagnostics.EventLog log = new System.Diagnostics.EventLog();<br />
				log.Source = "Web Service: wsMNMhzData Encountered an Error";<br />
				log.WriteEntry(errorMessage);<br />
				Console.WriteLine("An exception occurred. Please contact your system administrator.");<br />
			}<br />
<br />
			<br />
<br />
			<br />
			return true;<br />
		}<br />
<br />

Thanks,

JJ

Re: Diffgram Updates

Mazdak6-May-04 7:45

6-May-04 7:45

MrJJKoolJ wrote:
Can I use messagebox object inside a webservice?

You can't.

MrJJKoolJ wrote:
cb.GetInsertCommand();
cb.GetUpdateCommand();

These lines are not needed. They will set automaticlly.

MrJJKoolJ wrote:
Console.WriteLine("An exception occurred. Please contact your system administrator.");

If you want to inform user an error occured , you can thrown SoapException and report it in your client. That line won't work. Also you can return a error code instead od throwing exception

Mazy

"One who dives deep gets the pearls,the burning desire for realization brings the goal nearer." - Babuji

Re: Diffgram Updates

MrJJKoolJ6-May-04 8:30

MrJJKoolJ

6-May-04 8:30

Hi Mazy,

How do I return an Error code back to the client from web service?

Thanks,

JJ

Re: Diffgram Updates

Mazdak6-May-04 8:36

6-May-04 8:36

Just set return value as an integer , which you can define for yourself that each number refer to specific error. You can return it in your catch block and outside it return 0 , just like many of win32 API do. Other way as I mentioned throwing SoapException which could be caught in client. You can search for it in Google for sample. Hope it helps. Smile | :)

Mazy

"One who dives deep gets the pearls,the burning desire for realization brings the goal nearer." - Babuji

php request

Alex Getman6-May-04 6:09

Alex Getman

6-May-04 6:09

Hi Gurus,
i am using following code to send request to php page on button click function:

HttpWebRequest request = (HttpWebRequest) WebRequest.Create("http://www.umc.ua/misc/sendsms.php");
request.Method = "POST";
request.ContentType = "application/x-www-form-urlencoded";
string postData = "network1="+oper.Text+"&Phone1="+phone.Text+"&Message="+text.Text+"&sender_name=sn";
byte[] buffer = Encoding.ASCII.GetBytes(postData);
request.ContentLength = buffer.Length;
Stream s = request.GetRequestStream();
s.Write(buffer, 0, buffer.Length);
s.Flush();
s.Close();

But when I lauching my program and clicking much times on to invoke this code an exception occurs:
"Unable to write data to the transport connection"
It happens aproximately every 10-15 times. Could someone tell what wrong with my code? Thanx

www.xedom.com

Heath Stewart6-May-04 8:02

6-May-04 8:02

First, you should encode the param values or they could be used to crack your CGI and beyond.

Second, are you actually getting the response from the server using request.GetResponse, or are you just queueing requests?

Finally, are the param values the same each time you click the button in your test case?

Microsoft MVP, Visual C#
My Articles

leppie6-May-04 9:13

leppie

6-May-04 9:13

Heath Stewart wrote:
Second, are you actually getting the response from the server using request.GetResponse, or are you just queueing requests?

I was gonna mention that, but I havent used it in such a long time, I thought I'll rather let someone else do it Smile | :)

^{top secret AdvancedTextBox}

Alex Getman6-May-04 10:15

Alex Getman

6-May-04 10:15

Yes, all parameters are the same. Let imagine that this is one dialog with single button and all code are implemented in OnButton click function. This button just sends an sms to a mobile through php page, so I do not need any server response. But when I sending 20-30 sms during 10 min. after each 10-15 clicks I got this exception message. Can you tell me how can I encode my param values? Thanx for reply.

www.xedom.com

Heath Stewart6-May-04 10:24

Passing Parameters using OnSelectedIndexChanged?

6-May-04 10:24

You could either reference the System.Web.dll assembly, or the JScript.NET assembly (don't remember off-hand what it's called) and use the HTML encoding method in there, or just do a simple replacement yourself, using Uri.HexEscape for all ASCII characters about 127 (implementing this your isn't hard either - just replace the character with &#XXX; where XXX is the decimal number equivalent. So, character 128 would be .

Microsoft MVP, Visual C#
My Articles

stan286-May-04 6:07

stan28

6-May-04 6:07

I am trying to pass a parameter to one of the OnSelectedIndexChanged events. Is this even possible ?
Code-Behind is C#.

Here's the Front-End Sample..
<asp:dropdownlist autopostback="True" id="SomeID" runat="server" onselectedindexchanged="ChangeIndex">

Here's What I want to achieved..
<asp:dropdownlist autopostback="True" id="SomeID" runat="server" onselectedindexchanged="ChangeIndex(1)">

So my method is ChangedIndex. Usually, if i leave it as is,
it will work. But I'm trying to make a generic function that
can be use for all.

Code-Behind.
public void ChangeIndex(object sender, EventArgs e)
{
do some stuff..
}
this works, but no parameters.

I tried:-
public void ChangeIndex(int i_temp)
{
do some stuff..
}
this gave me error.

Any sample syntax is appreciated. Confused | :confused:

Stanley

Re: Passing Parameters using OnSelectedIndexChanged?

Mazdak6-May-04 6:57

Re: Passing Parameters using OnSelectedIndexChanged?

6-May-04 6:57

Which control are you talking about? More than one control in WINDOWS FORM have this event. Most of them have the property name SelectedIndex or SelectedItems which you can use to get that value.

Mazy

"One who dives deep gets the pearls,the burning desire for realization brings the goal nearer." - Babuji

leppie6-May-04 9:15

leppie

6-May-04 9:15

I think its related to webforms Poke tongue | ;-P

^{top secret AdvancedTextBox}

Re: Passing Parameters using OnSelectedIndexChanged?

stan286-May-04 9:18

stan28

6-May-04 9:18

Sorry for being unclear.
Yeah, it's webform related.

Stanley

Re: Passing Parameters using OnSelectedIndexChanged?

Mazdak6-May-04 9:21