|
Something like this. Reread
|
|
|
|
|
much better. Now I'll read it.
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Hi,
the code shown has only one way to modify last_Time. If you are not satisfied with the value of last_Time, AFAIK there are only two possibilities:
1. Check(1) is called where Check(0) was intended, causing the block with "ast_Time=now" to execute.
2. More Check(1) calls are performed, maybe entirely unrelated to the ones you are looking at, but since last_Time is static, they all share that one variable.
Suggestions:
1. don't use static variables unless you really need them; when they just seem the easy way to solve something, they will come back at you later on. A better way would be to make them non-static and instantiate your class once for every independent series of checks you want to perform (you already have to instantiate since Check itself is not static).
2. choose better names for your variables, especially the class members (last_Time) and the method parameters (decision). Also use boolean type if only two values are allowed, use an enum when more than two non-counting values are acceptable.
Instead of if(decision==1) ... I would write if (packetOK) ... or if (packetState==PacketState.Good)...
Luc Pattyn [Forum Guidelines] [My Articles]
The quality and detail of your question reflects on the effectiveness of the help you are likely to get.
Show formatted code inside PRE tags, and give clear symptoms when describing a problem.
|
|
|
|
|
Funny thing you should say about the static last_time. That's exactly what I did. Take off the static and it worked just as planned. Thanks for the second confirmation. 
That's why I like this place
Later!!
|
|
|
|
|
Hi,
I have written a program that goes out to Fox News (http://www.foxnews.com) on an hourly basis and picks up the podcast for broadcasting on my local radio station. The software has been working perfect for the last 3 years. Now all of a sudden it will pick up and play the same .mp3 file over and over again. I suspect it is left over in the cache and that they are now tagging to cache that file. If I reboot the machine it picks up the latest podcast and works again. However every following hour it repeats the 1st newscast again and again.
I haven't done a lot of web programming and I've been looking at my C# book but I'm unsure how to ensure the cache has been cleared. How can I ensure the cache has been cleared?
Thanks,
Glenn
|
|
|
|
|
hell sir,
i am working on datagrid control in c# window application
i use datagridtextbox in datagrid . my probblem is that how can i do datagrid textbox column enable=false if it contains data =sunday
my code is...
try
{
dataGrid1.DataSource=null;
dt.Clear();
dataGrid1.TableStyles.Clear();
ad=new SqlDataAdapter("select * from attendance where months='"+txtmonth.Text+"' and class='"+txtcurrentclass.Text+"' and section='"+txtsection.Text+"' and session='"+Class1.session+"'",cn);
ad.Fill(dt);
dt.Tables[0].DefaultView.AllowNew=false;
dataGrid1.DataSource=dt.Tables[0];
DataGridTableStyle tbl=new DataGridTableStyle();
tbl.MappingName=dt.Tables[0].TableName;
DataGridTextBoxColumn txt=new DataGridTextBoxColumn();
// txt.MappingName=dt.Tables[0].Columns["id"].ColumnName;
// txt.HeaderText="SNo.";
// txt.TextBox.BorderStyle=BorderStyle.FixedSingle;
// txt.TextBox.Enabled=false;
// txt.ReadOnly=true;
// txt.Width=45;
// txt.TextBox.BackColor=Color.Salmon;
// txt.NullText="0";
//
// tbl.GridColumnStyles.Add(txt);
//
txt=new DataGridTextBoxColumn();
txt.MappingName=dt.Tables[0].Columns["Studentcode"].ColumnName;
txt.HeaderText="Student Code";
txt.ReadOnly=true;txt.TextBox.BorderStyle=BorderStyle.FixedSingle;txt.TextBox.BackColor=Color.Salmon;
txt.TextBox.Enabled=false;
txt.TextBox.WordWrap=true;
txt.Width=160;
txt.Alignment=HorizontalAlignment.Left;
tbl.GridColumnStyles.Add(txt);
//
txt=new DataGridTextBoxColumn();
txt.MappingName=dt.Tables[0].Columns["studentname"].ColumnName;
txt.HeaderText="Name";
txt.TextBox.BorderStyle=BorderStyle.FixedSingle;
txt.TextBox.Enabled=false;
txt.TextBox.BackColor=Color.Salmon;
txt.TextBox.ForeColor=Color.Blue;
txt.ReadOnly=true;
txt.Width=80;
txt.Alignment=HorizontalAlignment.Center;
tbl.GridColumnStyles.Add(txt);
txt=new DataGridTextBoxColumn();
txt.MappingName=dt.Tables[0].Columns[4].ColumnName;
txt.HeaderText="1 "+txtmonth.Text;
txt.TextBox.BorderStyle=BorderStyle.FixedSingle;txt.Alignment=HorizontalAlignment.Center;
txt.Width=65;
if(txt.TextBox.Text==DayOfWeek.Sunday.ToString())
{
txt.ReadOnly=true;
txt.TextBox.BackColor=Color.Red;
}
else
{
txt.ReadOnly=false;
txt.TextBox.BackColor=Color.White;
}
tbl.GridColumnStyles.Add(txt);
txt=new DataGridTextBoxColumn();
txt.MappingName=dt.Tables[0].Columns[5].ColumnName;
txt.HeaderText="2 "+txtmonth.Text;
txt.Width=47;
txt.TextBox.BorderStyle=BorderStyle.FixedSingle;
txt.Alignment=HorizontalAlignment.Center;
if(txt.TextBox.Text==DayOfWeek.Sunday.ToString())
{
txt.ReadOnly=true;
txt.TextBox.BackColor=Color.Red;
}
else
{
txt.ReadOnly=false;
txt.TextBox.BackColor=Color.White;
}
tbl.GridColumnStyles.Add(txt);
txt=new DataGridTextBoxColumn();
txt.MappingName=dt.Tables[0].Columns[6].ColumnName;
txt.HeaderText="3 "+txtmonth.Text ;
txt.Width=47;
txt.TextBox.BorderStyle=BorderStyle.FixedSingle;txt.Alignment=HorizontalAlignment.Center;
if(txt.TextBox.Text==DayOfWeek.Sunday.ToString())
{
txt.ReadOnly=true;
txt.TextBox.BackColor=Color.Red;
}
else
{
txt.ReadOnly=false;
txt.TextBox.BackColor=Color.White;
}
tbl.GridColumnStyles.Add(txt);
//class1
txt=new DataGridTextBoxColumn();
tbl.GridColumnStyles.Add(txt);
dataGrid1.TableStyles.Add(tbl);
my problem is that i want to make textbox readonly in txt.Textbox contains data=sunday and when i scroll data datagrid first three columns do not scroll except else.
please help me ..
|
|
|
|
|
Investigate the OnCellPaint event handling.
Henry Minute
Do not read medical books! You could die of a misprint. - Mark Twain
Girl: (staring) "Why do you need an icy cucumber?"
“I want to report a fraud. The government is lying to us all.”
|
|
|
|
|
Hello all,
I've added this line in my VC# editor as a reference from the Outlook
Object model:
using Outlook = Microsoft.Office.Interop.Outlook;
But, I don't think this exists (or I get an error anyways).
Can anyone direct me to the correct reference?
Thanks.
|
|
|
|
|
It looks like the correct spelling.
Have you added a reference to it to your project? That's often what's missing...
There are three kinds of people in the world - those who can count and those who can't...
|
|
|
|
|
I'm pretty sure there is a reference in my editor.
I've followed this to the 'T': http://support.microsoft.com/kb/819398
|
|
|
|
|
OK - that's not the way I've added a reference for it.
Instead of going through the "COM" tab in the Add Reference dialog, try the ".NET" one, and if you scroll down you should find "Microsoft.Office.Interop.Outlook". Try using that as the reference instead.
There are three kinds of people in the world - those who can count and those who can't...
|
|
|
|
|
Hello,
I have a ComboBox, which get its values from BindingSource, and gets its current value from another BindingSource. (If it matters, the source of the BindingSource is DataSet).
Here is the problem i am facing: i want the combo to present the values, but with exta information that changes from value to value.
I want that for strings that are 3 length long, will be showen with extra "!!", and strings with 5 length long will be shown with exta "@@".
For example, if this is the content of my DataSet (which connected to the BindingSource): dog, cat, cool, animal
so this is how the value would seem to the user:
dog!!, cat!!, cool, animal@@
of course i dont want the DataSet behind the BindingSource to be changed.. just for the combo presentation.
Thank you very much,
Liran.
|
|
|
|
|
|
This is how i did it"
i captured the event handler for FormatChanded.
and in it, i used the FormatEventArgs to change the value in code.
for example: if (blabla) then e.value += (blabla)
no CustomFormatter needed 
Thanks alot.
|
|
|
|
|
How can I make a treeview with some nodes have checkbox and some not? please help
|
|
|
|
|
Hello
Help me Please!!
the problem occur when :
first i run my chat program and it's working well , but when i get out of my program
at log back in im getting this error at the server When he try to invoke me some event:
{"Found two different objects associated with the same URI, '/999013af_72e3_42b1_affa_43766d7f541f/Chat'."}
i just dont know what to do :S
here is the client side app.config
<?xml version="1.0" encoding="utf-8" ?>
<configuration>
<system.runtime.remoting>
<application>
<client>
<wellknown
type="IskaMessengerCommanObject.RemotableObejct, IskaMessengerCommanObject"
url="http://XXXX:7717/Chat"
/>
</client>
<channels>
<channel
ref="http"
port="0"
>
<clientProviders>
<formatter ref="soap" />
</clientProviders>
<serverProviders>
<formatter ref="soap" typeFilterLevel="Full" />
</serverProviders>
</channel>
</channels>
</application>
</system.runtime.remoting>
</configuration>
and this is the instance im running from client
RemotingConfiguration.Configure("c:\\Hafaka\\IskaMessengerUser.exe.config", false);
RemotableObejct RemoteObject = (RemotableObejct)Activator.GetObject(typeof(RemotableObejct), "http://xxxxxxxxxx:7717/Chat");
<div class="ForumMod">modified on Friday, May 22, 2009 3:47 AM</div>
|
|
|
|
|
Hi all,
I keep getting the following error message:
<br />
System.InvalidOperationException: Collection was modified; enumeration operation may not execute. <br />
at System.Collections.ArrayList.ArrayListEnumeratorSimple.MoveNext() <br />
at System.Windows.Forms.Application.ExitInternal() <br />
at System.Windows.Forms.Application.ThreadContext.OnThreadException(Exception t) <br />
at System.Windows.Forms.Control.WndProcException(Exception e) <br />
at System.Windows.Forms.Control.ControlNativeWindow.OnThreadException(Exception e) <br />
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam) <br />
at System.Windows.Forms.UnsafeNativeMethods.DispatchMessageW(MSG& msg) <br />
at System.Windows.Forms.Application.ComponentManager.System.Windows.Forms.UnsafeNativeMethods.IMsoComponentManager.FPushMessageLoop(Int32 dwComponentID, Int32 reason, Int32 pvLoopData) <br />
at System.Windows.Forms.Application.ThreadContext.RunMessageLoopInner(Int32 reason, ApplicationContext context) <br />
at System.Windows.Forms.Application.ThreadContext.RunMessageLoop(Int32 reason, ApplicationContext context) <br />
at System.Windows.Forms.Application.Run(Form mainForm) <br />
at BlueBroadcaster_Ultimate.ProgramClass.Main(String[] args)<br />
does anybody know what this means or where it could be originating from?
BlueBroadcaster
|
|
|
|
|
Actually, it's not crazy. It's probably something like :-
foreach (Object obj in myCollection)
{
myCollection.Add(anotherobj);
}
and it's telling you that you can't add / remove / clear or whatever in the collection you're iterating over.
If you only ever want to add new items, you can use a "for (int loop=0; loop<myCollection.Count; ++loop)", although that will iterate over the new items as well.
Otherwise, create "Add" and "Remove" lists which can be processed after the main loop to add and remove as needed.
There are three kinds of people in the world - those who can count and those who can't...
|
|
|
|
|
Sounds like Items was removed from your list before the line that causes error.
hope usefull.
sorry for bad english. 
|
|
|
|
|
Basically, you cannot alter a collection of items as you ForEach over it. You can make changes to the items inside the collection, but you cannot add or delete items to the collection itself.
|
|
|
|
|
Dave Kreskowiak wrote: you cannot alter a collection of items as you ForEach over it
why does this happen?
|
|
|
|
|
I guess because the framework is keeping track of where you are in the collection, which assumes the collection will not change. If it does, what should foreach do ? you may have removed an item, how do you know if it has been iterated over ? Would you want it to be ? Easier just to say 'don't change this while I am working on it'. I suspect there's a more concrete reason than that, if you look into how it's implimented, but it seems obvious to me that it would create some situations where you could not predict the behaviour of foreach if you could alter the collection.
Christian Graus
Driven to the arms of OSX by Vista.
"I am new to programming world. I have been learning c# for about past four weeks. I am quite acquainted with the fundamentals of c#. Now I have to work on a project which converts given flat files to XML using the XML serialization method" - SK64 ( but the forums have stuff like this posted every day )
|
|
|
|
|
Hello,
I am writing a program that will be used in Labview (think of it as a scripting enviroment for those who do not know). I have about 30 dlls that are working together, some .net and some unmanaged. So I have a control in the labview that when it is run, the executable location becomes labview.exe in the national instruments folder. So the top dll is called, and then searches in the national instruments folder.
Then none of the other .net dlls can be called, because they are in the original folder.
So I want to tell the system where to search for my dlls. I found information about the config file and have been trying <probing> and <codebase> and nothing is working. Can you tell me what is wrong with my config file.
Thank you.
<code><?xml version="1.0"?>
<configuration>
<runtime>
<assemblyBinding
xmlns="urn:schemas-microsoft-com:asm.v1">
<probing privatePath="C:\Documents and Settings\admin\Desktop\csharp_core\bin\Debug\SubPlugs\" />
<dependentAssembly>
<assemblyIdentity name="PaintDotNet.Core" publicKeyToken="null" culture="neutral" />
<codeBase version="3.36.3426.17484" href="C:\Documents and Settings\admin\Desktop\csharp_core\bin\Debug\SubPlugs\PaintDotNet.Core.dll"/>
</dependentAssembly>
</assemblyBinding>
</runtime>
</configuration>
|
|
|
|
|
The privatePath is relative to the application's base directory and must be a subdirectory of the base directory.
Have you tried just
<probing privatePath="SubPlugs" />
Alan.
|
|
|
|
|
Hello,
Thanks for the reply. I did just try SubPlugs, but it did not work.
So I have
PaintDNetWindow.dll which is found
and then there is
PaintDotNet.Base.dll
PaintDotNet.Core.dll
PaintDotNet.Data.dll
...
which are called from paintdnetwindow.dll
The config file does not seem to be even read.
Thanks
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
