|
I have am reading from an external file and then converting that file into an array. The array is comma delimited, as seen here:
222,1.07181,0.933001
333,1.67566,0.596777
444,0.026708,37.4413
now, the first part of each line is a code, so that if the array was in any order, i could still find what i need. However, i want to turn this code into a string, because 222 doesn't mean anything to your average person. I have everything set up, but it wont compile because i cannot get my .ToString() or Convert.ToString() to work. Here is the code where I am receiving the error, help is much appreciated.
private void importRates()
{
string path = Settings.Default.FileName; //this["FileName"];
if (!File.Exists(path))
{
MessageBox.Show("no file found at " + path);
return;
}
int lineCount = 0;
StreamReader sr = new StreamReader(path);
{
String line;
while ((line = sr.ReadLine()) != null)
{
string[] ToFrom = line.Split(','); // this was originally double.Parse(ToFrom[0]);
rates[lineCount, 0] = ToFrom[0].ToString();
rates[lineCount, 1] = double.Parse(ToFrom[1]);
rates[lineCount, 2] = double.Parse(ToFrom[2]);
lineCount++;
}
sr.Close();
}
}
|
|
|
|
|
fixed. Had to add:
Dictionary<string, double[]> ratesDictionary = new Dictionary<string, double[]>();
and change my importRates to:
private void importRates()
{
string path = Settings.Default.FileName; //this["FileName"];
if (!File.Exists(path))
{
MessageBox.Show("no file found at " + path);
return;
}
int lineCount = 0;
StreamReader sr = new StreamReader(path);
{
String line;
while ((line = sr.ReadLine()) != null)
{
string[] ToFrom = line.Split(',');
ratesDictionary.Add(ToFrom[0].ToString(), new double[2]{double.Parse(ToFrom[1]), double.Parse(ToFrom[2])});
lineCount++;
}
sr.Close();
}
}
|
|
|
|
|
Today I found myself writing / reading binary image files, and I caught myself writing the following on a read:
using(fileReader = new BinaryReader(new FileStream(filePathName, FileMode.Open)))
{
}
Before I corrected my self, it got me thinking what exactly happens to anonymous instance members that are implementing the IDisposable interface? Would it be lost after the child instance is the finalized by sitting and waiting to be Garbage Collected? Or in the above example would the FileStream be picked up with the BinaryReader?
I do know that if you finalize the parent an instance is based off of, both get finalized... I know not as to what happens above??? 
This might even be a good article, if you could find it among the 1000's of hits on this topics keywords.
plz send teh codez? 
-Spacix
All your skynet questions[ ^] belong to solved
I dislike the black-and-white voting system on questions/answers. 
|
|
|
|
|
This is interesting. I got the following when I looked BinaryReader class through reflector
protected virtual void Dispose(bool disposing)
{
if (disposing)
{
Stream stream = this.m_stream;
this.m_stream = null;
if (stream != null)
{
stream.Close();
}
}
this.m_stream = null;
this.m_buffer = null;
this.m_decoder = null;
this.m_charBytes = null;
this.m_singleChar = null;
this.m_charBuffer = null;
}Noticed the lines in bold ? it's closing the associated stream but not disposing. Also I noticed BinaryReader don't have a destructor. Any thoughts ?
|
|
|
|
|
This is odd, why does did MS even give it an IDisposable interface? Seams that streams don't need finalization and thusly just calling close is all you need.
-Spacix
All your skynet questions[ ^] belong to solved
I dislike the black-and-white voting system on questions/answers.
|
|
|
|
|
Is there a way to the label the ticks in the TrackBar without creating separate label controls?
Beth
|
|
|
|
|
Only by writing your own class derived from progress bar and adding code to do that. So, labels are probably easiest
Christian Graus
Please read this if you don't understand the answer I've given you
"also I don't think "TranslateOneToTwoBillion OneHundredAndFortySevenMillion FourHundredAndEightyThreeThousand SixHundredAndFortySeven()" is a very good choice for a function name" - SpacixOne ( offering help to someone who really needed it ) ( spaces added for the benefit of people running at < 1280x1024 )
|
|
|
|
|
hi
how to generate foreach statement with CodeDom ?
thanks
|
|
|
|
|
Hi,
There is not direct way to use the For Each statement in CodeDom, however, you may try the following iteration technique to get the desired results.
IEnumerator e = dt.Rows.GetEnumerator();
while(e.MoveNext())
{
DataRow row = (DataRow)e.Current;
myList.Add(ConvertToObject(row));
}
You can generate a while loop using the CodeIterationStatement class, but not specify the InitStatement and IncrementStatement properties.
Hope this helps  .
Regards,
John Adams
ComponentOne LLC
|
|
|
|
|
I have a Windows service in which I need to stop worker threads from my main thread. I am trying to use events to do this but I am stumped on why it is not working. Each class that runs a worker thread creates a stop event and a response event. When I need to stop the worker thread I call into the threads class and set the event. However, instead of the worker thread detecting that the event has been set and stopping gracefully, it just disappears. Why?
What is the best method for stopping a worker thread from the main thread?
|
|
|
|
|
Seeing some code might help.
Doesn't the event code execute in the calling thread? (I hadn't considered this until now.)
I've done similar things:
Calling the Thread's Abort method
Setting a semaphore that the thread checks
|
|
|
|
|
What do you do in your worker thread?
If you have something like a while(...) { do something }
then you can loop until a signal (e.g. a AutoResetEvent) is set by the main thread.
Urs
-^-^-^-^-^-^-^-
no risk no funk
|
|
|
|
|
<br />
void CFileChangeEvent::stopProcessThread()<br />
{<br />
TRACE( "> > > > CFileChangeEvent::stopProcessThread() entered - Event handles < %X, %X >, Event ID < %s >\n",<br />
m_hProcessStopEvent, m_hProcessRespEvent, getIdentifier() );<br />
<br />
::SetEvent( m_hProcessStopEvent );<br />
}<br />
<br />
UINT CFileChangeEvent::workerThread( LPVOID lpParam )<br />
{<br />
CFileChangeEvent* pEvent = (CFileChangeEvent*)lpParam;<br />
HANDLE hProcessStopEvent = pEvent->getProcessStopEvent();<br />
<br />
for( ; iterFile != vecFifFiles.end() && ! bCancelled;<br />
iterFile++ )<br />
{<br />
Do some work here<br />
<br />
<br />
DWORD dwWaitStatus = ::WaitForSingleObject( hProcessStopEvent, 1 ); <br />
if ( dwWaitStatus == WAIT_FAILED )<br />
{<br />
TRACE( "> > > > CFileChangeEvent::workerThread() - ::WaitForSingleObject() failed - Event handle < %X >\n",<br />
hProcessStopEvent );<br />
bCancelled = true;<br />
}<br />
else if ( dwWaitStatus == WAIT_OBJECT_0 )<br />
bCancelled = true;<br />
}<br />
}<br />
Thanks for your help.
|
|
|
|
|
RoyceF,
You seem to be in the wrong forum.
Regards,
Gareth.
|
|
|
|
|
Sorry, I thought I was in the C++/MFC forum.
|
|
|
|
|
I am wondering if the WaitForSingleObject() doesn't work if the event gets set before WaitForSingleObject() is called. It seems that it would just return the correct status of the event object.
|
|
|
|
|
I have re-posted this in the C++/MFC forum. I would move it if I could. Thanks.
|
|
|
|
|
Hi everyone,
I've been working on a windows mobile application that consists of a series of dynamically generated user forms and I was wondering if anyone knows how (following activation of the On-Screen Keyboard) I would get the currently selected form item to move up so it is above the OSK. Currently when the OSK is activated it obscures the active items and worse still completely obscures items at the bottom of the form. Its gotta be possible but I'm really stuck on how I would actually do it.
I'm pretty new to C# (<6mo) and especially to programming for mobile devices. Any help would be greatly appreciated. Hopefully the solution isn't staring me in the face
Cheers,
Drew
|
|
|
|
|
Drew,
You may try setting the Top property of the selected control to a value above the keyboard showing.
For example, in the code below, I am changing the top property of the checkbox which gets hidden when the input panel is enabled:
private void button1_Click(object sender, EventArgs e)
{
this.inputPanel1.Enabled = true;
}
private void inputPanel1_EnabledChanged(object sender, EventArgs e)
{
if (inputPanel1.Enabled == true)
{
checkBox1.Top = inputPanel1.Bounds.Top - 50;
}
}
Regards,
Dave
Dave Traister
Software Engineer
ComponentOne LLC
www.ComponentOne.com
|
|
|
|
|
Hi
i want to Export/Import XML into Hastable using C# application
Thanks
sri
|
|
|
|
|
Member 4008492,
Thats nice. Good luck with that.
Regards,
Gareth.
|
|
|
|
|
What have you tried so far? We can't help without knowing what the exact problem is.
If you do a little research but don't understand, then ask about the part you don't understand. If you've written code that doesn't work right, and you don't know why (or you know why, but don't know how to fix it) then ask us for help.
There's not much good in making a statement of what you want to do, and then expecting to be given the code.
Here[^] is a simple article on using a hashtable.
And this[^] seems to show how you can read an XML file and get data on each of the nodes.
If you still need help, then feel free to ask. But don't expect other people to do all the work for you.
My current favourite word is: Bacon!
-SK Genius
|
|
|
|
|
Hello everyone,
I can not find too much materials about yield return. In MSDN sample,
http://msdn.microsoft.com/en-us/library/9k7k7cf0(VS.80).aspx
what happens behind the scene of statement, "yield return result"?
I think what happens is a object instance which implements IEnumerable (collection pattern) interface is created (but what is the type of the instance? some C# internal type?), and each time "yield return result" is called, a new element is inserted into the internal array of the instance. Any more reference documents?
thanks in advance,
George
|
|
|
|
|
Have you compiled the example code and stepped through it? 
led mike
|
|
|
|
|
Sure, led mike.
Code will execute between Power method and foreach statement. But no code is shown what happens behind the scene?
regards,
George
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
