|
I may have misread your original post, but it doesn't sound like you got the effect you were looking for. You've gotten something else LIKE what you were describing though, with LOTS of problems.
Dave Kreskowiak
Microsoft MVP - Visual Basic
|
|
|
|
|
Actually, I'm in pretty good shape. . .
I already have separate code which runs on a timer loop which checks the target window positions and moves my overlays to match. I've written code to adjust the z-order on each pass, but that looked kludgy because my overlays would disappear and then reappear every time the target windows were clicked (they would come to the fore, and then my overlay would be brought back in front.) I could avoid the blinking by setting them TopMost, but then my overlays would cause problem when windows are overlapped; any window opened in front, like a browser, would have my overlays popping through.
This solution fixes the z-order problem entirely, does not cause blinking or pop-through, and does not even require my code to do anything - windows handles the z-order processing efficiently for me.
The one problem - that of a failed refresh if I minimize one of my overlays - is not a major problem to me. It was only causing a problem when I hid an overlay window after some third window was interposed between the target window and the owned window, which is a rare condition (once I ensured that my own application didn't do this to me! When switching overlays, I needed to ensure I was hiding the old before showing the new, which is a simple fix.)
If, in some other circumstance, the condition isn't rare, the fix is a simple matter of adjusting the .Hide() call; it should include a SendMessage call which sends an invalidation method to the owner window. Voila!
|
|
|
|
|
hi there!
can i know how to set the date format of the calendar in a datetimepicker?
actually i know it can be set in the regional settings of your machine but how about during run-time?
any suggestions or ideas will be very much appreciated!
tnx in advance!
|
|
|
|
|
Hi
public void SetMyCustomFormat()
{
// Set the Format type and the CustomFormat string.
dateTimePicker1.Format = DateTimePickerFormat.Custom;
dateTimePicker1.CustomFormat = "MMMM dd, yyyy - dddd";
}
Hope it helps
|
|
|
|
|
hello!
I already tried that before i post and it only change the text of the datetimepicker. the calendar still has the format that is set on your regional settings.
anyway, tnx for the reply!
|
|
|
|
|
What is static and Dynamic Assemblies?
What is the use of these Assemblies in our project ?
|
|
|
|
|
This is a forum for asking for specific help with programming questions, usually requiring code, and a description of a problem.
Google is a tool which can be used for general research, including but not limited to, homework.
|
|
|
|
|
Hi.
I am working on a project in which I need to encrypt data I am storing in MySql Database.There are many codes available on Internet but most of them are in PHP and I have to encrypt data in C# windows application .Any help please.
Thank you.
|
|
|
|
|
Hi, I a trying to capture the voice using direct sound, but it is not working,here is my code can anyone help me, I will be very thankful to him.
private void CaptureThread()
{
MemoryStream inputStream = new MemoryStream(intervalSize);
while (button1.Text == "Stop")
{
bool val=bufferNotifyEvent.WaitOne();
int currentPos;
int readPos;
captureBuffer.GetCurrentPosition(out currentPos, out readPos);
inputStream.Position = 0;
captureBuffer.Read(0, inputStream, intervalSize, LockFlag.None);
outputBuffer.Write(0, inputStream, intervalSize , LockFlag.None);
outputBuffer.Play(0,BufferPlayFlags.Looping);
}
Stop();
}
the above code is the main thread that run to capture the voice, and some initializations are below
private void Form1_Load(object sender, System.EventArgs e)
{
WaveFormat waveFormat;
CaptureBufferDescription capBufDesc;
BufferPositionNotify[] notifyPositions;
bitsPerSample = 8; // 8 bits per sample
const int samplesPerSecond = 11025; // 11 KHz
const double interval = 1/45f; // Seconds
intervalSize = (int) (interval * samplesPerSecond * bitsPerSample / 8);
int samplesPerInterval = intervalSize * 8 / bitsPerSample;
int bufferSize = intervalSize * 2;
captureDevice = new Capture();
waveFormat = new WaveFormat();
waveFormat.BitsPerSample = bitsPerSample;
waveFormat.SamplesPerSecond = samplesPerSecond;
waveFormat.Channels = 1;
waveFormat.AverageBytesPerSecond = bitsPerSample * samplesPerSecond / 8;
waveFormat.BlockAlign = (short)(bitsPerSample / 8);
waveFormat.FormatTag = WaveFormatTag.Pcm;
capBufDesc = new CaptureBufferDescription();
capBufDesc.Format = waveFormat;
capBufDesc.BufferBytes = bufferSize;
captureBuffer = new CaptureBuffer(capBufDesc, captureDevice);
bufferNotify = new Notify(captureBuffer);
bufferNotifyEvent = new AutoResetEvent(false);
notifyPositions = new BufferPositionNotify[2];
notifyPositions[0] = new BufferPositionNotify();
notifyPositions[0].EventNotifyHandle = bufferNotifyEvent.Handle;
notifyPositions[0].Offset = intervalSize - (bitsPerSample / 8);
notifyPositions[1] = new BufferPositionNotify();
notifyPositions[1].EventNotifyHandle = bufferNotifyEvent.Handle;
notifyPositions[1].Offset = bufferSize - (bitsPerSample / 8);
bufferNotify.SetNotificationPositions(notifyPositions);
BufferDescription outputBufferDescription;
outputDevice = new Device();
outputDevice.SetCooperativeLevel(this, CooperativeLevel.Normal);
outputBufferDescription = new BufferDescription(waveFormat);
outputBufferDescription.BufferBytes =(int)(intervalSize*1.5f-50);
outputBufferDescription.ControlVolume = true;
outputBufferDescription.GlobalFocus = true;
outputBuffer = new SecondaryBuffer(outputBufferDescription, outputDevice);
}
all the initialization in done in Load_page and the thread will run the user will press the button, but no voice is captured, plz guide me, I will be thankful to u,
|
|
|
|
|
Hi,
I have a question on sql writing
for a table schema as below
Table :
(studentID, studentName, courseID, classID, Age)
What is the correct sql of " select studentID from table where classID = "101" and group by courseID and order by age " ? (ie. Group by courseID, and within the same courseID, the studentID are ordered by age)
Thanks
|
|
|
|
|
I might have this wrong after a few beers, but:
SELECT studentID FROM Table
WHERE classID = '101'
GROUP BY studentID, courseID
ORDER BY Age
Hope that helps
Jon Humphreys
ActivePlanet Software
Bangkok, Thailand
|
|
|
|
|
what is the complete code for downloading a file using FTP through ASP.NET/C#
-- modified at 1:50 Friday 11th November, 2005
|
|
|
|
|
Perhaps FileWebRequest[^] will provide the answer?
I assume you could replace the file:// protocol with ftp://. If you need to supply a username and password, use the form ftp://username:password@somewhere.com.
/ravi
My new year's resolution: 2048 x 1536
Home | Music | Articles | Freeware | Trips
ravib(at)ravib(dot)com
|
|
|
|
|
Hi guys,
I don't know why this error below keeps popping-up when I try to run my application and crashes.
Anybody seen this before? The application autoruns when the Windows startup.
************** Exception Text **************
System.NullReferenceException: Object reference not set to an instance of an object.
at System.Windows.Forms.NotifyIcon.WndProc(Message& msg)
at System.Windows.Forms.NotifyIconNativeWindow.WndProc(Message& m)
at System.Windows.Forms.NativeWindow.Callback(IntPtr hWnd, Int32 msg, IntPtr wparam, IntPtr lparam)
Thanks guys.
|
|
|
|
|
Im going to take a wild stab in the dark
nosferatu2000 wrote: System.NullReferenceException: Object reference not set to an instance of an object.
You have an object somewhere, which you try to call a method on, however that object is Null.
Null Reference exceptions are pretty cut and dry... not really that much ambiguity except maybe WHAT is actually null.
Debug your code, step through it until this error occurs and then you'll know what is null.
|
|
|
|
|
private void Form1_Resize(object sender, System.EventArgs e)
{
if (FormWindowState.Minimized == this.WindowState)
{
this.Hide();
this.ShowInTaskbar = false;
this.Visible = false;
notify.Visible = true;
}
}
private void notifyIcon1_DoubleClick(object sender, System.EventArgs e)
{RestoreDisplay();}
private void RestoreDisplay()
{
Show();
WindowState = FormWindowState.Normal;
ShowInTaskbar = true;
this.Visible = true;
notify.Visible = false;
}
private void menuItem1_Click(object sender, System.EventArgs e)
{RestoreDisplay();}
private void menuItem2_Click(object sender, System.EventArgs e)
{Dispose(true);}
private void Form1_Load(object sender, System.EventArgs e)
{
this.Resize += new EventHandler(Form1_Resize);
notify.DoubleClick += new EventHandler(notifyIcon1_DoubleClick);
}
i'm having problems restoring it from system tray.
the display is buggy. basically what happens is that the tabs contents dont appear. sometimes the treeview contents dont appear either.
i can get it up and down fine, however making it functional seems to be a little harder.
|
|
|
|
|
I am developing a system on Visual C#. What I want to do is create an icon on my desktop that will open up my system. I also want the icon to produce a loading page and then open the first window of my system. Any ideas? Please do not tell me to google it.
|
|
|
|
|
vandread1 wrote: Please do not tell me to google it.
*grin* Now why would we say that ?
I don't get your problem - do you want to create the icon in code ? Because otherwise, it sounds like your icon will be a shortcut to your exe, surely ? How does MySQL come into this ?
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
I accidently put mysql as the title. It doesn't have to do anything with my question. The icon is a shortcut to my exe, but I want a loading page to appear before my exe.
|
|
|
|
|
OK - so the question is, how do I get a splash screen ?
Basically, you want to store a picture in your resources for your exe, then you want to create a frameless dialog which shows the picture, and loads it from resources. Make it a member variable, call Show on it as your first step in initialisation, and then destroy it when your program is fully loaded and ready to go.
LMK if you need help with any of these steps.
Or you could use this[^] ( for what it's worth, I googled it )
Christian Graus - Microsoft MVP - C++
|
|
|
|
|
I've written an ftpclient app. All it does is connects to the host uploads a file and disconnects. In my code I close the socket. However when I try to reestablish the socket connection I get this exception:
Cannot access a disposed object named System.Net.Sockets.Socket.
In my close method I'm doing this:
<br />
FTPSocket.Shutdown(SocketShutdown.Both);<br />
FTPSocket.Close();<br />
in my open I'm doing this:
<br />
IPEndPoint ipend = new IPEndPoint(Dns.Resolve(Host).AddressList[0],Port);<br />
FTPSocket.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.ReceiveTimeout, 60000);<br />
FTPSocket.SetSocketOption(SocketOptionLevel.Socket, SocketOptionName.SendTimeout, 60000);<br />
FTPSocket.Connect((EndPoint)ipend);<br />
I'm not sure what I'm missing here. Any thoughts would be appreciated.
FYI I'm using an FTP class called FTPClient.
Thanks
Tom Wright
tawright915@yahoo.com
|
|
|
|
|
MSDN says
The Close method closes the the remote host connection and releases all managed and unmanaged resources associated with the Socket. Upon closing, the Connected property is set to false.
I would guess that either Dispose() is being called on the socket object itself or on some object used by it internally.
I would just create a new socket object at the start of your open method. The garbage collector should clean up the previous one if it is still hanging around or you could put FTPSocket = null at the end of you're close method to be sure
|
|
|
|
|
okay this may be the dumbest question ever......but when you say create a new socket object you mean do this:
FTPClient ftpClient1 = null;
right?
I'm not up on all the terminology yet. Sorry
Tom Wright
tawright915@yahoo.com
|
|
|
|
|
Never mind I got it. Thanks for the help
Tom Wright
tawright915@yahoo.com
|
|
|
|
|
Problem with Caching mutiple ArrayLists using a ToString value for
the name. The reason I am doing this is that I Cache.Insert multiple
arrays but if they all have the same array name they will all have the
same array (i.e. last array saved). I know I can hard code every set in the database, but I'm trying to make this code Dynamic for the long run.
I cannot seem to be able to extract the value from within the
"tmpfieldName" variable when I create an ArrayList
[e.g. ArrayList tmpfieldName.ToString() = new ArrayList();]
The data that is in the the SQL table consists of 2 columns. The first
column contains a fieldname value and the second column contains the fieldCode
value. This data is used in dropdown lists within multiple web pages.
It looks like:
fieldName fieldCode
name bob
name Ron
name Chuck
hair brown
hair blond
hair grey ... and so forth.
When I use the code below it returns a "Compiler Error Message: CS1002: ; expected"."
What method should I be using to get the string value for an ArrayList name?
I have tried this using a DataSet and DataTable[index} to cache and it does the same thing.
Thanks for any ideas
--------------------- sample code to load mutilple arrays --------------------------
SqlConnection dbConnection = new SqlConnection("server=" +cServer+";database=*********;
User ID=*********; Password=********");
SqlCommand mCommand = new SqlCommand("SELECT fieldName,fieldCode FROM dbo.AaFieldCodes
ORDER BY dbo.AaFieldCodes.fieldName", dbConnection);
dbConnection.Open();
SqlDataReader mReader = mCommand.ExecuteReader(CommandBehavior.CloseConnection);
string tmpfieldName = "firstGroup";
try
{
// Iterate through all returned records
bool firstRecord = true;
while(mReader.Read())
{
if (tmpfieldName = "firstGroup")
{
tmpfieldName = mReader.GetValue(0).ToString();
ArrayList tmpfieldName.ToString() = new ArrayList();
}
if (tmpfieldName != mReader.GetValue(0).ToString())
{
_cache.Insert(tmpfieldName, tmpfieldName.ToString());
tmpfieldName = mReader.GetValue(0).ToString();
ArrayList tmpfieldName.ToString() = new ArrayList();
}
tmpfieldName.ToString().Add (mReader.GetValue(1).ToString());
}
}
finally
{
_cache.Insert(tmpfieldName, tmpfieldName.ToString());
mReader.Close();
}
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
