|
Hi,
yes you can capture stdout and stderr outputs from another process while it is still running, which gives
a much better user experience than performing a ReadToEnd() and wait until the process has exited.
The general solution requires two extra threads, basically identcial, one to handle stdout and one to handle stderr.
Each thread should loop and read its stream, and process it in any way you see fit.
Both threads should be terminated a few seconds AFTER your target process has exited, there still is data
in the stream when the process exits!
I got this to work easily on XP and Vista, but found it impossible coming up with code that would also run
fine on Win98 (that was on .NET 1.1 at the time).
|
|
|
|
|
Hi,
I wrote an application that able to connect another bluetooth device in .Net Framework 2.0 using bluetooth API, now I want to do this with .Net Compact Framework on my mobile device. That's the problem, When I'm Calling Bluetooth API like WSAStartup or using SizeOf or any other methods of Marshal class, it gives me NotSupportedException exception.
Please tell me how can i solve this problem.
Thank you.
DMASTER
|
|
|
|
|
Please do not cross post
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
Now what do YOU think 'not supported' means ?
Christian Graus
Driven to the arms of OSX by Vista.
|
|
|
|
|
Hi dear Christian,
I know what it means BROTHER , if you refer to MSDN you can see that, it's marked as supported on .net CF. But I don't know what's that exception reason, and why gives it to me?
Thanks for your reply.
|
|
|
|
|
Hi,
there are several WSA versions, not all of them are implemented on each platform.
This might help you.[^]
modified on Wednesday, December 3, 2008 4:15 AM
|
|
|
|
|
Hi Luc,
Ok, Let's suppose you're right. So what about Marshalling and methods of Marshal Class ?
|
|
|
|
|
Marshaling what? SizeOf what? something that is not supported maybe?
check the exact exception, note the line numbers, look at the source code, teach your IDE to display line numbers. Try to be as specific as you want the answers to be.
|
|
|
|
|
I have kind of a hard task here. I built a WPF App that uses a MSSQL 2000 database. The info comes in from a Base Table and two join tables. because of this I had to build a datatable to "flaten" out the data. So each Base and have many tools and each tool has its own Gridview column that I creat in C# on the fly so if I add more tools the coloumns we be auto created. This works great. The Info displayed is Either Rerun the date the tool will be used or the date the tool will be off. Now what I need to do is change the color of the cell to if rerun then be red if the date the tool is on then green and date off lets say gray.
I am trying to use the code behind to try a datatemplate but I am not understanding how that works.
|
|
|
|
|
First of all ... this post should have been placed under ASP.NET not C# .. no problem you probably missed that
Anyway ... for a grid view ... you can try using the ItemDataBound event for the grid view to change the cell color or format the cell if you wanted ... search for it and you will know how to use ItemDataBound event.
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
Samer Abu Rabie wrote: this post should have been placed under ASP.NET
Ummmm, OP wrote: I built a WPF App that uses a MSSQL 2000 database, so would be better in the WPF forum 
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
Oops ... I don't know how come I saw it an ASP.NET application  .. sorry Mr. jesse34 ... my bad ... my solution was upon ASP.NET not WPF
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
Samer Abu Rabie wrote: don't know how come I saw it an ASP.NET application
It happens. I wonder if the ASP.NET solution would be the same in WPF
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
 Mmmmm ... Actually I don't think so, its not the same grid control, and I haven't got deep enough in WPF to answer him ... but certainly I will give it a shot in a spare time of mine 
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
Samer Abu Rabie wrote: its not the same grid control, and I haven't got deep enough in WPF to answer him ...
Me neither. Trying to get more into WPF, I mean I've read all of Josh Smith's articles and Sacha Barber's, as well. Getting there 
"The clue train passed his station without stopping." - John Simmons / outlaw programmer
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
"Not only do you continue to babble nonsense, you can't even correctly remember the nonsense you babbled just minutes ago." - Rob Graham
|
|
|
|
|
You know something ... I might do the same too ... I believe the challenge is not the code practices itself as of using the WPF Controls since their presentation on the form is of XML, the grid control is an example ... it seems that the .NET Framework doesn't have one  and there are a lot of articles speaks of using a third party control or something like that !
Anyway ... I would defiantly put this as a self training material ... and maybe when I know something I will get back to this post and figure out a solution to Mr. Jesse34
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
I want to thank both of you for looking into this. Like I said I am new to WPF as well and this boogles my mind.
|
|
|
|
|
I can see maybe the WPF thread .. but I am using C# as my code behind. The is neither here nor there. I am wonding on this ItemDataBound event. Can you give a simple example is it a Method of the GridView?
|
|
|
|
|
I've developed one small school project(windows project) now I've to deliver my project to my client.If my cient was trying to install it more than once in some of system it should ask some serial code or it should raise not more than once.Simply my project has to install only once.Again trying to install in other systems it should ask serial keys or watever so how to do these settings to my project(is there any chance to set in click once deployment).
It's too urgent for me.........thank u for ur quick response.
|
|
|
|
|
Roney wrote: Simply my project has to install only once.
Set an machine registry key on install and check it before install.
Roney wrote: is there any chance to set in click once deployment
ClickOnce only simplifies the deployment from a single point, it does not solve single installation completely.
|
|
|
|
|
Yes i thought like this whatever u have told.........but how to set registry key and where it is to be set......plz help me it is very urgent.
|
|
|
|
|
Hi ... You can do so using the properties of the setup project ... there is a property called DetectNewerInstalledVersion which will check if a newer version is already installed on the machine and aborts the installation if there is one, and this also includes the same version as well, the default value for it is false so set it to true, but you have to make sure that the version of the product is set to 1.0.0 and above ... this property will not work on lower versions as i think (e.g 0.0.5 )
Give it a shot ... and you might wanna take a look at another property in the setup project which is RemovePreviousVersions
I hope this helps ...
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
I think you are not get correctly to my question--I want to install my project only once at client location..if the client make copy to my exe files and try to install in other systems(means if the client will want to make duplicate copies of my project and try to cash my project) it should say 'this application is not permitted to install more than once and even it has to be give like alreday it was installed by some client ".
|
|
|
|
|
I hope I got you correctly this time, You want you application to only be installed once on one machine, and whatever the client do to install it on another machine he shall fail ! Well ... I could think of two ways to help you out:
- Generate some kind of license and whenever the application is installed he should communicate a server for that license to validate it, if its good then complete it or run the application, other wise it will fail.
- You can build your application to that specific client machine, by checking the partition serial number or some hard disk info or even reading a unique registry key, where its only unique to that machine.
Sincerely Samer Abu Rabie
Note: Please remember to rate this post to help others whom reading it.
|
|
|
|
|
Yes now you got it...but how to set registry keys and i don't know plz help me how to crack this problem i.e very important to my project......
can u plz give settings or solution for that...........
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
