|
irreproducible error --> no error! 
cheers
|
|
|
|
|
Hi
I have created a CListCtrl with the additional options as Hot
Track Selection & OneClick activate.
I have set the Hover time to 1 Second.
Now, When I try to point to any item ( Hover around 1
second ) then, I create a CRichEditCtrl on the fly on some
condition with some data on to it.
Now, whenever I change to focus to any other item and the
required condition is not satisfied , it waits 1 second to
destroy the earlier editbox .
I would like to remove the display of this editbox as soon as i
move the mouse to some other item.
Which Event should I call implement to do this??
Also, when i move to anyother item it immediately changes
to blue color. Pl. let me know which event gets fired here ?
Thanx in advance
regards
Sankar
|
|
|
|
|
You could subclass CRichEditCtrl, an make it destroy its self when it the mouse moves way from it. Better yet you could create a single CMyOwnRichEditCtrl and have it hidden to begin with, then just show it at the proper time... it could then just hide its self when its no longer needed.
-Ben
---------
On the topic of code with no error handling -- It's not poor coding, it's "optimistic"
|
|
|
|
|
I have developed an MFC application under Win 98 which handles the WM_CTLCOLOR message quite a lot to alter the color of the text etc.. This works fine on Windows 98 but when I ran it on Windows 2000 the WM_CTLCOLOR message wasn't being handled (or maybe it wasn't being sent?) and so all the colour has disappeared from my application!
Please could anybody tell me why this is happening.
David Osborn
|
|
|
|
|
What kind of control are you altering color of?
I've never seen this problem on W2K...
A code snippet could help people helping you... 
Paolo.
|
|
|
|
|
Hello,
Let's say that I have A BHO that is working on the post data when the BeforeNavigate is fired.
i want to assure that i'm thy only BHO that i reading the postdata and there are no other BHO that can get into my PostData, how can i get the list of the BHO and when i need, block them from getting events.
Thanks,
|
|
|
|
|
You can get the list in the same place you registered your BHO.
And you can’t block other BHO from getting events.
Good luck,
Dror
|
|
|
|
|
|
HI! I have this window application and all i had to do was write c code in a function.
But now through this function, i have to create a window, in order to display the results
that were calculated in my function. Please help!!!
|
|
|
|
|
Are you using MFC ? If so, just create a dialog template in the resource editor, and hook it up to show your variables. Plenty of tutorials here on how to do that, but ask if you're stuck.
Christian
#include "std_disclaimer.h"
People who love sausage and respect the law should never watch either one being made.
The things that come to those who wait are usually the things left by those who got there first.
|
|
|
|
|
I have a problem in which the function GetPrinterDeviceDefaults, (a member function of CWinApp) is failing in debug mode but its working well in release mode.. some one please help me i couldnt figure out whats the problem and i am at my wits end ..
|
|
|
|
|
I seem to remember there was a trick to this too. Could you tell us where you are crashing - in your code, or MFC ? What's the error ? What's the line of code ?
Christian
#include "std_disclaimer.h"
People who love sausage and respect the law should never watch either one being made.
The things that come to those who wait are usually the things left by those who got there first.
|
|
|
|
|
I have a problem in which the function GetPrinterDeviceDefaults, (a member function of CWinApp) is failing in debug mode but its working well in release mode.. some one please help me i couldnt figure out whats the problem and i am at my wits end ..
|
|
|
|
|
I created a MCI window in my application:
m_hMCIWnd=MCIWndCreate(this->GetSafeHwnd(), NULL, NULL, "c:\\test.avi");
This creates MCI window with the PlayBar.
All the commands invoked from the PlayBar (or right-click on the playback window), like: View, Speed, Close, Volume etc... are working. But when I choose Open it doesn't do anything!!!
Then I tried to invoke Open dialog programmatically:
LONG xx=MCIWndOpenDialog(m_hMCIWnd)
But this return allways -1 and nothing is displayed ???????
If anyone could help me, I'd appreciate it very much.
Thanks in advance.
Jerzy
|
|
|
|
|
Hi there,
I am sort of new to the world of MFC and I was building a ListView and I need to add column name to the listview at runtime.
As it stands, it appears that pszText of the listview doesn't take CString values. So, tried assigning the CString to a TCHAR array. The only way I could find was by going to through every CString letter and then adding it to the TCHAR array ... i.e.
TCHAR tcArray[500];
ZeroMemory(tcArray);
for(int i =0; szString.GetSize(); i++)
{
tcArray[i] = szString.GetAt(i);
}
I was wondering if there is a more elegant way of setting a TCHAR array to a CString or this is it! i.e. a certain copy function or an overloaded operator, etc...
thanks a lot!
However, this leaves me with all those extra
|
|
|
|
|
strcpy(tcArray, szString)
|
|
|
|
|
There is only a CString to const THCAR* conversion defined. If you need a modifiable buffer from a CString you should take a look at the GetBuffer and ReleaseBuffer member functions.
If you need a TCHAR* and are sure that the string is not modified you can use something like this:
TCHAR* ptchar = (TCHAR*) (const TCHAR*) cstring;
But be carefull.
Oliver
|
|
|
|
|
It's a long time I was last on codeproject.com, therefore i'm not up-to-date
I'd like to know whether someone already programmed
menus that look like the one's in Office XP. I didn't find any resources on this side. 
Thanks in advance
|
|
|
|
|
Its not free, but the BCGControlBar library does a good job of them.
-Ben
---------
On the topic of code with no error handling -- It's not poor coding, it's "optimistic"
|
|
|
|
|
Its not free
It depends on the type of project you'll be working on. If it will be freeware then the license is free, otherwise it will cost you.
|
|
|
|
|
Hi, I am trying the following code to enumerate child windows of Start Menu. However, it doesn't seem to work. Could you take a look and tell me what I did wrong or is there another way to do it. Thank you very much.
RECT rcMenu;
BOOL CaptureMenuToClipboard(BOOL fIncMouseCursor, BOOL fIncMenuBar)
{
/*BOOL bSuccess = FALSE;
POINT ptStartMenu;
ptStartMenu.x = 1;
ptStartMenu.y = 1;
HWND hStartMenu;
HWND hShellTrayWindow = FindWindow("Shell_TrayWnd", NULL);
hStartMenu = ChildWindowFromPoint(hShellTrayWindow, ptStartMenu);
if (EnumChildWindows(hStartMenu, (WNDENUMPROC)EnumChildProc, NULL))
bSuccess = TRUE;
if (bSuccess)
{
if (!CopyScreenToClipboard(NULL, &rcMenu, fIncMouseCursor))
bSuccess = FALSE;
}
return bSuccess;*/
}
BOOL CALLBACK EnumChildProc(HWND hwnd, LPARAM lParam)
{
BOOL bFlag = FALSE;
if (GetWindowRect(hwnd, &rcMenu))
bFlag = TRUE;
return bFlag;
}
|
|
|
|
|
What do you mean by "enumerate child windows of Start Menu"? the start menu button does not have any child windows, unless you mean the menu, but it will not exist until you depress the start menu button(though its probably cached somewhere).
-Ben
---------
On the topic of code with no error handling -- It's not poor coding, it's "optimistic"
|
|
|
|
|
Hi, I am trying the following code to enumerate child windows of Start Menu. However, it doesn't seem to work. Could you take a look and tell me what I did wrong or is there another way to do it. Thank you very much.
RECT rcMenu;
BOOL CaptureMenuToClipboard(BOOL fIncMouseCursor, BOOL fIncMenuBar)
{
/*BOOL bSuccess = FALSE;
POINT ptStartMenu;
ptStartMenu.x = 1;
ptStartMenu.y = 1;
HWND hStartMenu;
HWND hShellTrayWindow = FindWindow("Shell_TrayWnd", NULL);
hStartMenu = ChildWindowFromPoint(hShellTrayWindow, ptStartMenu);
if (EnumChildWindows(hStartMenu, (WNDENUMPROC)EnumChildProc, NULL))
bSuccess = TRUE;
if (bSuccess)
{
if (!CopyScreenToClipboard(NULL, &rcMenu, fIncMouseCursor))
bSuccess = FALSE;
}
return bSuccess;*/
}
BOOL CALLBACK EnumThreadWndProc(HWND hwnd, LPARAM lParam)
{
BOOL bFlag = FALSE;
if (GetWindowRect(hwnd, &rcMenu))
bFlag = TRUE;
return bFlag;
}
|
|
|
|
|
Does anyone have any suggestion, tips, or code snippets on how to do a AutoScroll(automatically scrolling the scroll bar to capture entire client area content) Screen Capture on Client Area Window? Thank you very much. 
|
|
|
|
|
Hi there,
I am able to capture pop-up menu using this code.
HWND hPopupMenu = FindWindow("#32768",NULL);
if (hPopupMenu && IsWindowVisible(hPopupMenu))
GetWindowRect(hPopupMenu, &rcMenu);
This doesn't work for Microsoft Office Products and Windows Explore 'cause their menus are not standard menu. For instance, Microsoft Word. I am trying this. I used Spy++ to find out the class name and window caption for the menu bar. I tried FindWindow("MsoCommandBar", "Menu Bar") on Microsoft Word. It doesn't work at all. Could someone give me some pointers how to capture pop-up windows from Microsoft Office Products and Windows Explorer. Thank you very much. Will EnumChildWindows or EnumThreadWindows API functions help for this case? If so, could you gimme some tips. Thank you again.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
