C / C++ / MFC Discussion Boards

Member 7951483-Apr-04 6:21

3-Apr-04 6:21

Hi,

We have created this Group, 'CUIPL Mailing Group', which we think
you might also be interested in.

CUIPL is an Image Processing Library written in ANSI C++ in order to
be platform independent.

We thought that it would be more useful if we put it on the internet
as an open source, this way people can use it, but most important
they can extend it to cover areas not covered in the initial release.

This library is intended to be a tiny step towards a huge arabian
open soucre community, where we can build the software we need.

We don't have to rely on the west to supply us with - at least - our
software needs, we can do our own, and we are old enough to do so Wink | ;)

we have the knowledge, experties, and the tools to achieve our goal.
So,

WHAT ARE WE WAITING FOR!!?

the group address is

http://www.smartgroups.com/groups/cuipl

Email us back if you need any help, or what it's all about...

Regards

Ahmed Mohamed Abdelsalam am_abdelsalam@msn.com
Mohamed Galal El-Din Mohamed eng_mg@yahoo.com

cFormView controls - font, size, etc.

snoopy3693-Apr-04 5:36

snoopy369

3-Apr-04 5:36

Hiya, I think I'm just being dumb, but I'm having a hard time deciding exactly where to change the font, size, etc. for controls on my form.

I have an MDI project with CFormView as its base; nothing very complicated, basically just a label at the moment anyways.

I'd like the label to not be 8 point times or whatever; but that's not doable visually for some reason (like it is in VB for Excel or what have you). I gather I want to use CWnd::SetFont which should be a member of my IDC_STATIC control, but VC++ seems to disagree with my placing of the function.

I don't doubt it's just been too long since I used VC++ to remember something this obvious ... TIA Smile | :)

-Joe

Re: cFormView controls - font, size, etc.

Michael P Butler3-Apr-04 8:11

Michael P Butler

3-Apr-04 8:11

I recommend using

http://www.codeproject.com/staticctrl/clabel.asp[^]

It gives you a great deal of flexibility over static controls.

Michael

But you know when the truth is told,
That you can get what you want or you can just get old,
Your're going to kick off before you even get halfway through.
When will you realise... Vienna waits for you? - "The Stranger," Billy Joel

Re: cFormView controls - font, size, etc.

gUrM33T3-Apr-04 15:15

gUrM33T

3-Apr-04 15:15

All static controls share the common control ID IDC_STATIC. IMHO, if you need to change the font, size, etc. of static controls at run-time, the first step is to change the control ID from IDC_STATIC to something more meaningful e.g. IDC_STATIC_NAME and then in your dialog's OnInitDialog, create a CFont, and use CWnd::SetFont to apply the changes.

Gurmeet S. Kochar

If you believe in God, it's because of the Devil

Determint String Language

Anonymous3-Apr-04 3:48

Anonymous

3-Apr-04 3:48

Hi..

what can i use to know the language of string like if it English or Arabic?

Re: Determint String Language

Alexander ^M.,4-Apr-04 1:06

Alexander ^M.,

4-Apr-04 1:06

code an algorithm on your own, I've never heard of any other way.

Don't try it, just do it! Wink | ;-)

HIDE FIRST DIALOG

andresfecas3-Apr-04 3:34

andresfecas

3-Apr-04 3:34

HOW I CAN HIDE MY FIRST DIALOG IN A MFC APP?

Re: HIDE FIRST DIALOG

Prakash Nadar3-Apr-04 3:51

Prakash Nadar

3-Apr-04 3:51

You can hide any window using ShowWindow(SW_HIDE)

MSN Messenger.
prakashnadar@msn.com

"If history isn't good, just burn it." - Sidhuism.

Urgent: Having problem with while loop

dreamerzz3-Apr-04 2:16

dreamerzz

3-Apr-04 2:16

Hi,
I am working with the MFC which is connected to the database using recordset. However, I currently encounter some problem. Let me explain further what this program is abt.

For this program that i am working on now, i have an update button. Also, there are 3 parameters which i want to keep changing the values on its own once the update button is being clicked. This might need to use "while loop" and i would like to change the values between the range of 1 to 5 only. This looping will only stop when i click the close on the window itself.

However, the problem now is that i need to change the values when i input it myself and press the update button before it can be stored inside the database.

So i am hoping that anyone who knows how to get this thing workin to give me some ideas on how to go abt doin this.

Thanks

Re: Urgent: Having problem with while loop

avenger_sb255-Apr-04 7:46

avenger_sb25

5-Apr-04 7:46

The solution is very simple: THREADS (it's easy too Wink | ;)

)

I give the sample code in Windows API. I m sure u can port it to MFC. I have given MFC portions that i can predict(lol, i dont know much MFC).
//First of all this is the thread which will continiously update ur value when update button is clicked.

<small>//------global data------</small><br />
HANDLE hthread; <small>// this is thread handle</small><br />
int idThread;   <small>// this is threaed id</small><br />
//---The thread function------------------------<br />
DWORD WINAPI UpdateThread(LPVOID lpParameter)<br />
{<br />
while(1) <small>//keep looping</small><br />
{<br />
<small>//WRITE YOUR UPDATING CODE HERE THAT WILL CONTINIOUSLY UPDATE THE VALUES<br />
//Make the values to be updated GLOBAL as there is no way to return values from a thread.</small><br />
}<br />
}

//
This function is called when Update Button is clicked(name it according to ur program)

OnUpdateButtonClick()<br />
{<br />
<small>//when update button is clicked, start the update thread should be started</small><br />
hThread=CreateThread(NULL,0,UpdateThread,0,0,&idThread);<br />
<small>//dont bother about the parameters that are NULL or 0, u ll never need them</small><br />
}

Now thread executes repeatedly irrespective of ur main program code.

We want to stop the thread when STOP button is clicked. So we write the following code:

OnStopButtonClick()<br />
{<br />
 <small>//We sud stop the thread now (i.e. stop the updating loop inside the thread)</small><br />
 TerminateThread(hThread,0)<br />
 <small>//WRITE HERE "UR CODE TO WRITE UPDATED VALUES INTO THE DATABASE"</small>}<br />
}

I think, this will solve ur problem, ask if u have any doubts.

^{Remember... testing & debugging are always part of programming ...so exterminate those stinking bugs}

Re: Urgent: Having problem with while loop

dreamerzz5-Apr-04 21:56

dreamerzz

5-Apr-04 21:56

Hi hi,

Thanks for the codings that is provided. Much appreciated. However, i am unfamiliar with using THREADS. But will give it a try on the codings that you provided. In the meantime, is there any other solution to this problem??

Thanks lots Smile | :)

Re: Urgent: Having problem with while loop

avenger_sb256-Apr-04 5:30

avenger_sb25

6-Apr-04 5:30

Hey, i've got another solution for u (that too WITHOUT threads Wink | ;)

)

//----------make a global var----------
//glo can take two values>>
//0:do nohting; 1:update the values; int glo=0;
DO idle-time processing- i think the function is OnIdle() for CwinApp (i'm not sure about MFC, find it urself)
The OnIdle function is executed when ur window doesnt receive any key input.
OnIdle is executed all time but it will update ur values only when glo is 1.
The following code will ensure this:

CWinApp::OnIdle()<br />
{<br />
 if(glo==0)<br />
 ; //do nothing<br />
 else if(glo==1)<br />
 {<br />
 //write all ur updating stuff here<br />
 }<br />
}

Inside Update Button click function, all u have to do is to set the value of glo to 1.
//---------Update button click rotine-----

OnUpdateClick()<br />
{<br />
 glo=1;<br />
}

Inside Stop Button click function, all u have to do is to reset the value of glo to 0. This will stop the update.(;))
//---------Update button click rotine-----

OnStopClick()<br />
{<br />
 glo=0;<br />
<br />
//NOW WRITE UPDATED VALUES TO DATABASE<br />
}

Thats allllllll...........

...Avenger

^{Remember... testing & debugging are always part of programming ...so exterminate those stinking bugs}

Re: Urgent: Having problem with while loop

dreamerzz9-Apr-04 6:04

dreamerzz

9-Apr-04 6:04

Hi,
For this thread function, i have some doubts which i have stated below. Can kindly explain to me? Thanks

For this function that you have stated:
DWORD WINAPI UpdateThread(LPVOID lpParameter)

I just need to copy down or do i have to state any values to the lpParameter?

Here, i have also attached part of the codings that i have done, but i have tried the methods that you have given but it dun seems to work the way as you state. The coding stated below, the while loop is working and the database will be updated on click the UpdateDB. however, once i click on the update button, the whole program seems to hang.

<br />
//global variables<br />
int check_exit=0;<br />
<br />
//Update button function<br />
void CUpdateView::OnUpdatedb() <br />
{<br />
	// TODO: Add your control notification handler code here<br />
<br />
	//get a pointer to the recordset<br />
		CUpdateDoc* pDoc = GetDocument();<br />
		UseRecordset* pUseRecordset	= &pDoc->m_UseRecordset;<br />
	int x = 5;<br />
	do<br />
	{<br />
		pUseRecordset->Edit();<br />
<br />
		//UpdateData(true);	<br />
		pUseRecordset->m_propatime = m_propagation*x;<br />
	<br />
		pUseRecordset->Update();<br />
<br />
		if (check_exit = 0)<br />
			check_exit=1;	<br />
	}while(check_exit!=1);<br />
<br />
	//::MessageBox(0, "Updated!", "Information",0);<br />
}<br />
<br />
//Exit button function<br />
void CUpdateView::OnExit() <br />
{<br />
	check_exit = 0;<br />
}

Thanks a million,
dreamerzz

Re: Urgent: Having problem with while loop

avenger_sb259-Apr-04 7:57

avenger_sb25

9-Apr-04 7:57

if (check_exit = 0)
If this is what you have coded, then change it to:
if (check_exit == 0)

LOOK CLOSE AT UR PROGRAM, it doesnt come out of the do-while loop

Well, if you have written that by mistake and are actually using if (check_exit == 0) then your program is hanging because it keeps looping inside the do-while LOOP. ACTUALLY UR PROGRAM APPEARS TO HANG(loops & loops and loops) AS IT DOESNT RETURN CONTROL BACK TO WINDOWS(ur main program), so you can no longer interact with any other buttons.

The trick is to run a continious LOOPING do-while LOOP, but we want it to run seperately from our main program. HERE COMES THE THREAD:::>>>

int loop=1; //1 means keep looping 0 means stop and end the thread
DWORD WINAPI UpdateThread(LPVOID lpParameter)
{
//get a pointer to the recordset
CUpdateDoc* pDoc = GetDocument();
UseRecordset* pUseRecordset = &pDoc->m_UseRecordset;
int x = 5;

while(loop==1)
{
pUseRecordset->Edit();

//UpdateData(true); 
pUseRecordset->m_propatime = m_propagation*x;

pUseRecordset->Update();
}
}

THE ABOVE FUNCTION DOES NOTHING. IT DOESNOT START A NEW THREAD. It is like any ordinary function function defination. Its has to be called from somewhere to make it execute. BUT UNLIKE ORDINARY FUNTIONS, we will not call UpdateThread(<<something>>) as it will not start a new thread.

And the name "UpdateThread" is purely arbitrary. You can name the thread as "dreamerzz Thread()" or "CrapThread()" or "BoomBoom()" or whatever you want.

Now, we want this thread to start when we click Update buttom. so, we write::>>>

//------global data------
HANDLE hthread; // this is thread handle
int idThread; // this is threaed id

//Update button function
void CUpdateView::OnUpdatedb() 
{
// TODO: Add your control notification handler code here

// in place of "UpdateThread" use whatever you have named the thread
hThread=CreateThread(NULL,0,UpdateThread,0,0,&idThread); 
}

You dont have to explicitly end the thread as it will automatically terminate when the value of "loop" becomes 0. (To explicitly terminate a thread you can use the function TerminateThread(hThread,0);)

//Exit button function
void CUpdateView::OnExit() 
{
loop = 0;
}

Ask if u have doubts

...Avenger

Remember... testing & debugging are always part of programming ...so exterminate those stinking bugs

Re: Urgent: Having problem with while loop

dreamerzz20-Apr-04 2:20

dreamerzz

20-Apr-04 2:20

Hi,

Thanks for the help given.;)

dReaMerzZ

please help me have a look at below "onInitDialog()",why return true at the end?

vividtang3-Apr-04 2:16

vividtang

3-Apr-04 2:16

BOOL CTest02Dlg::OnInitDialog()
{
CDialog::OnInitDialog();

// IDM_ABOUTBOX must be in the system command range.
ASSERT((IDM_ABOUTBOX & 0xFFF0) == IDM_ABOUTBOX);
ASSERT(IDM_ABOUTBOX < 0xF000);

CMenu* pSysMenu = GetSystemMenu(FALSE);
if (pSysMenu != NULL)
{
CString strAboutMenu;
strAboutMenu.LoadString(IDS_ABOUTBOX);
if (!strAboutMenu.IsEmpty())
{
pSysMenu->AppendMenu(MF_SEPARATOR);
pSysMenu->AppendMenu(MF_STRING, IDM_ABOUTBOX, strAboutMenu);
}
}

// Set the icon for this dialog. The framework does this automatically
// when the application's main window is not a dialog
SetIcon(m_hIcon, TRUE); // Set big icon
SetIcon(m_hIcon, FALSE); // Set small icon

// TODO: Add extra initialization here

return TRUE; // return TRUE unless you set the focus to a control
}

Re: please help me have a look at below "onInitDialog()",why return true at the end?

Gary R. Wheeler3-Apr-04 2:49

Gary R. Wheeler

3-Apr-04 2:49

Normally, when a dialog opens, Windows will set the focus to the first control in the dialog in the tab order. You can override this behavior in OnInitDialog() by setting the focus yourself to some other control. If you return FALSE from OnInitDialog(), Windows assumes that you've set the focus to the control you want, and it will not set the focus as it usually does. Return TRUE to get the normal behavior.

Software Zen: delete this;

GetNetworkParams & GetAdaptersInfo

Anonymous3-Apr-04 2:06

Anonymous

3-Apr-04 2:06

Hi,
Can anyone equivalent APIs of GetNetworkParams & GetAdaptersInfo to work on Windows NT 4.0.

Thanks, Blush | :O

Scolling of BIG document

Still learning how to code3-Apr-04 1:08

Still learning how to code

3-Apr-04 1:08

Hi, I'm working on an app using a view class based on CScrollView. As the doc is BIG, I've hit the 32768 'limit' of SetScrollSizes(). I'm sure I remember seeing an article on CP about getting around this problem, but can I find it ?? Can someone point me in the right direction please !! ?

Doug

Re: Scolling of BIG document

Gary R. Wheeler3-Apr-04 2:12

Gary R. Wheeler

3-Apr-04 2:12

Use SetScrollInfo instead.

Software Zen: delete this;

Re: Scolling of BIG document

Still learning how to code3-Apr-04 7:47

Still learning how to code

3-Apr-04 7:47

Hi Gary, Yes, I've just stumbled over that and am now over the problem. Thanks, Doug

Doug

map container

MatthewP3-Apr-04 0:57

MatthewP

3-Apr-04 0:57

Can someone please explain 1) the effect of "op" in each of these three map initializations below, 2)why op needs to be a class or struct as an overloaded () operator , and 3) why when I use #3 I loose the ability to access an element using map[key], such as ++map[key]. Thanks!

1) map<key, elem,="" op=""> m;
2) map<key, elem=""> m(op);
3) map<key, elem,="" op=""> m(op);

Where I've seen these for reference:
1) The C++ Standard Library, page 196.
2) Accelerated C++, page 137.
3) Accelerated C++, page 321.

Matthew

Re: map container

MatthewP3-Apr-04 4:06

MatthewP

3-Apr-04 4:06

Sorry, the examples didn't print out right:

1) map<key, elem, op> m;
2) map<key, elem> m(op);
3) map<key, elem, op> m(op);

Matthew

how to make button control colorful .

vividtang2-Apr-04 23:08

vividtang

2-Apr-04 23:08

how to make button control colorful .

Re: how to make button control colorful .

gUrM33T3-Apr-04 0:31

gUrM33T

3-Apr-04 0:31

MSDN Documentation states:

Buttons with the BS_PUSHBUTTON, BS_DEFPUSHBUTTON, or BS_PUSHLIKE styles do not use the returned brush. Buttons with these styles are always drawn with the default system colors. Drawing push buttons requires several different brushes-face, highlight and shadow-but the WM_CTLCOLORBTN message allows only one brush to be returned. To provide a custom appearance for push buttons, use an owner-drawn button.

Gurmeet S. Kochar

If you believe in God, it's because of the Devil

Use Ctrl+Left/Right to switch messages, Ctrl+Up/Down to switch threads, Ctrl+Shift+Left/Right to switch pages.