|
If the drives are both on the same cable, try changing the jumper setting on the new drive to "Slave" instead of the default "CS" (cable select) if you havn't already.
If the drives are on different cables (1 disk/controller), then make sure they are both set to master.
|
|
|
|
|
On the IDE Slot 1 I configured my old HDD.
On the other slot available, I connected both DVD Drive and new HDD ( contains the Windows XP installation ) using single cable.
-Sarath.
"Great hopes make everything great possible" - Benjamin Franklin
|
|
|
|
|
This would really surprise me if the problem was related to Fedora. Try this:
On IDE 0 (the first controller), connect your new HDD as the master drive and set the jumper to master. Then connect your old HDD as the secondary device on the same cable and set the jumper to slave. Also, make sure that the cable is 80 pin and/or ATA133, you don't want two HDD operating off of a low cable rating, like ATA66.
Now, on IDE 1 (the second controller), connect your DVD drive as master and set the jumper as such.
If you think that the BIOS is the culprit, then reset it now.
Now, go into your BIOS and set the boot order like this:
1 - Floppy Drive (if you have one)
2 - Secondary Master CD/DVD Drive
3 - Primary Master Hard Disk
4 - Primary Slave Hard Disk
Now try booting the Fedora installation DVD.
|
|
|
|
|
Try asking on the FedoraForum[^], and include details about your hardware configuration.
|
|
|
|
|
I have a bat file with some commands for registry manipulations. I need to determine the current folder path for my bat file.
Haw can I do this?
http://www.jetideas.com
|
|
|
|
|
Actually, I am a little confused as to the answer. My company laptop, using WinXP SP2, says:
"CHDIR: Show or change current directory", which is a little weird. However, it works as listed, but I am not sure if they haven't changed something there....
If you are in doubt, check the Sysinternals-Tools. They probably have what you are looking for.
Cheers,
Sebastian
--
"If it was two men, the non-driver would have challenged the driver to simply crash through the gates. The macho image thing, you know." - Marc Clifton
|
|
|
|
|
I have a requirement to redirect an print job from an MS-DOS based program, to a text file, rather than LPT1:
Back in the day, when MS-DOS ruled the world, I seem to remember that this could be done with a DOS command, but cannot remember how?
Can anyone refresh my memory?
Thanks
Steve Jowett
-------------------------
Sometimes a man who deserves to be looked down upon because he is a fool, is only despised only because he is an 'I.T. Consultant'
|
|
|
|
|
It's the same way, in a DOS box just redirect the output
C:\>program > out.txt
|
|
|
|
|
Thanks for the suggestion, but it does not work. In the meantime, I have had one of thoses moments of clarity and come up with a solution as follows :-
1. Add a Generic/Text Only printer to windows and set the port to FILE:
2. Share the new printer
3. Use the NET USE command to redirect print jobs to LPT1: e.g. NET USE LPT1: \\MyPC\GenericPrinter
Now when I print from my DOS program, the a windows box appears asking for the output file name.
Thanks
Steve Jowett
-------------------------
Sometimes a man who deserves to be looked down upon because he is a fool, is only despised only because he is an 'I.T. Consultant'
|
|
|
|
|
Hello,
I'm work with C++ and Win32 API. Somebody can help me ?
Thanks
André
|
|
|
|
|
Trying to post in the C++ forum might be more fruitful...
"Real programmers just throw a bunch of 1s and 0s at the computer to see what sticks" - Pete O'Hanlon
|
|
|
|
|
My question is on Intel's New Quad Core Processor Technology
This Quad Core Means - 4 CPU?
And if there is not 4 CPU(Processor) Then How it is Quad Core
It is same applicable for Core 2 Duo?
Actually what are this Terminology Means?
Believe Yourself™ :->™
|
|
|
|
|
A CPU is a single bit of hardware that handles general processing, you can have one or more CPU.
A CPU Core is the part of the CPU that does the processing, you can have multiple Cores per CPU.
In the case of the Core 2 Quad that means there are 4 Cores on 1 CPU.
|
|
|
|
|
Thanks for paying attantion!
here, there are some more queries,Please guide.
This Core is something like a Chip[Physically Present thing] or Just it's a kind a algorithm?
If it is any kind of chip then how it works for a single application?
Is that application distributes to 4 cores for process?, And thus it Improves Performence?
Is it something like that?
If there are 4 chip of core then it can Improve performence upto 4 times then a single core??
Actually I m still confuse in cores and it's work.
Believe Yourself™ :->™
|
|
|
|
|
A processor is a very difficult thing to understand all in one sitting. You will have to do some research about it yourself. If you don't know English all that well, Wikipedia.org[^] has several language translations. But a link to an English article about multi-core microprocessors is here[^].
To give you a light overview of the core:
You are right, on a high level the "core", technically known as a die, is a physical aspect of the processor; but it is actually just a name for a group of specialized components. This is the main area of computing and largely includes the Arithmetic and Logic Unit (ALU)[^], a series of registers[^] (or boolean gates), and some tri-state[^] buffers whose functions are essentially "on", "off", and "disconnect". This is a gross understatement of the core, so to get a better idea of what it looks like, check out this picture[^] of the core, or die, of an x86 Pentium processor.
From application to processor:
Any piece of software on the computer, the Operating System (such as Linux, Microsoft Windows, Solaris, BSD, etc.), or any application that you install and use, and even any application that you may write, must all be converted at some point into a language known as Assembly Code[^]. This language is not standard for all processors and accompanying hardware, the name Assembly Code just refers to all languages that must directly be interpreted by the hardware. A single processor can only ever do one thing at a time, but today's processors operate so fast that it gives the illusion of real multitasking. The applications simply get in line and wait for their turn to pass an instruction through the processor. The speed in which the instructions are processed is determined by the clock speed[^].
Now, the real performance gain is in having more than one processor operating at one time. There are many ways to achieve this; one way, like you mentioned, is to have multiple cores on one or more chip(s). The quad core processors are 4 die arranged around the necessary input/output operators. So you are roughly getting the performance of 4 independent processors. In my experience, and this is just my opinion, I would much rather have two (or more) independent processors than one multi core processor. The two independent processors have double the pin count and can physically handle more data I/O than a multi core setup.
I know this response was rather lenghy, but I hope it gave you somewhere to start learning about processors. There should be plenty of material from Wikipedia to keep you busy for a while, too.
|
|
|
|
|
|
Why don't you have access to Wikipedia?
|
|
|
|
|
It's Some kinda settings in firewall installed in my organization, and this is applicable to all employee.
This is only for high bendwidth[Good Speed for (FTP)] and so called 'DISIPLINE' , Nothing else.
So for me this code project is my wikipedia
Believe Yourself™ :->™
|
|
|
|
|
|
Do u really get what exactly Quad core is?
if yes then please explain..
thanks
Believe Yourself™ :->™
|
|
|
|
|
Ok, if you are still having trouble understanding what a quad core processor is then let me break it down for you (just keep in mind that this is on a very high level):
Q::What is a quad core processor?
A::A quad core processor is 4 processors on one chip.
Q::What is the purpose of a quad core processor?
A::If you are familiar with servers, you know that they often use more than one processor on the motherboard (or mainboard, system board, etc.). Many times they will use 2 and 4 processors. Compaq, among others, even makes a server with 8 processors on the motherboard. As you may know, these type of setups are very expensive. This is where quad core processors shine; they bring the same power of the high end servers to your desktop, and are much less expensive.
Q::What can a quad core processor do for me?
A::Let's pretend that you have a computer equiped with a quad core processor. Let's also pretend that you have 2 video cards each with dual monitor output, so we can drive 4 displays at the same time. Now we want to watch a movie in full HD on one monitor, surf the internet in another, do some serious photo editing with Adobe Photoshop in another monitor, and run a virtual machine of Windows Server 2003 hosting a website using IIS in another monitor. It sounds like a lot of stuff happening at one time, but with a quad core processor and enough RAM to keep up with it, this is possible.
If you are still confused, try to give some details as to exactly what it is you are still confused about.
|
|
|
|
|
Hello,
I am developed a windows service in c#.net3.0(WCF). There is a requirement, that, this service should spontaneously search for a file.mpg in linux folder.
My service will run on the windows platform, there is an another service running on linux and creates .mpg file in its folder. Now my service has to search for the file in linux folder.
Did anyone has met with the similar requirement ever? if so, how you have solved or met this. Please guide me on this.
Thank you
Anumadhu.K
Anee
|
|
|
|
|
Two approaches that come to mind are:
1) share the target folder on the linux system so that the windows system can see it
2) have the two services talk to one another and exchange any files between themselves
Judy
|
|
|
|
|
You need to run Samba on your linux box. Then just modify /etc/smb.conf to list the directory(s) and permissions you want to share on/with the Windows network.
You will have to work a little bit with the encrypted (Windows) and unencrypted (Samba) passwords to get them to play nicely together.
|
|
|
|
|
Hi all,
I currently using Microsoft Windows XP with IIS Web Server, i want to view page with WML file it always say download.
I have add MIME Type already, if you have any solution, please tell me.
Thanks
Socheat
|
|
|
|
|