|
You can use Dashcode with no coding knowledge. Though you'll likely need some JavaScript knowledge to do more advanced applications.
[^]
|
|
|
|
|
hi,
how do i create directory in windows mobile 5.0?
|
|
|
|
|
You could start with this[^].
|
|
|
|
|
Hi all,
I've got a program running on a PC with XP SP3 and ActiveSync 4.5 -- it gathers various information about Smart Phones that are attached to the PC. It is written using RAPI2. At startup, it checks to see if any devices are attached and adds those devices to its list of "devices to process" (using IRAPIDevice / IRAPIEnumDevices / IRAPISession / IRAPIDesktop) and registers an IRAPISink to receive notifications of devices attached after it has started.
Hardware setup -- the SPs are connected to the PC via a USB-to-fiber-to-USB connection to the front USB port on the PC. However, it doesn't make a difference to the issue whether the SP is connected through the fiber convertor or directly to the front USB port.
Now the issue:
CE5 and CE6-based SPs work correctly all the time -- if they are attached prior to program startup AND if they are attached after program startup. CE4.2-based SPs only work correctly if they are attached prior to program startup. When a 4.2 SP is attached after startup, the OnDeviceConnect member of my IRAPISink-derived class is never called.
I know the docs says RAPI2 is for CE5 and up but I'm not running the program on the SP; it runs on the PC and all the other RAPI2 interfaces work for communication with the 4.2 SP.
ActiveSync correctly detects the arrival of the 4.2 SP.
Any ideas? I used RAPI2 because of the ease of device insertion detection. I know I can always have my program periodically poll and check for new devices, but that isn't a very elegant solution. I'd rather fix the problem
Thanks!!
Judy
Be wary of strong drink. It can make you shoot at tax collectors - and miss.
Lazarus Long, "Time Enough For Love" by Robert A. Heinlein
|
|
|
|
|
Dear all
I have I have developed My application using Vb.net Team edition in A visual studio 2008 using SQl serverce compact edition
When I Install it in Tablet PC Samsung and try to run it (connect to data base SQLce compact edition) then it give error SQLCE35.dll is missing.
Could you help please
|
|
|
|
|
Hello,
I am developing an application for windows mobile 6.0 in C#. My requirement is such that when my application is running, I dont want the reminders set in calender as well as in outlook to interrupt.
for pocket outlook, we have certain classes in .NetCF using them I tried following code but it didnt work.
OutlookSession outlookSession = new Microsoft.WindowsMobile.PocketOutlook.OutlookSession();
AppointmentCollection aptCollect = outlookSession.Appointments.Items;
TaskCollection tskCollect = outlookSession.Tasks.Items;
SmsAccount smsAcc = outlookSession.SmsAccount;
foreach (Appointment apt in aptCollect)
{
apt.ReminderDialog = false;
apt.ReminderLed = false;
apt.ReminderRepeat = false;
apt.ReminderSound = false;
apt.ReminderVibrate = false;
}
foreach (Task task in tskCollect)
{
task.ReminderDialog = false;
task.ReminderLed = false;
task.ReminderRepeat = false;
task.ReminderSound = false;
task.ReminderVibrate = false;
}
and for canlender I found nothing. Please help me.
Thanks in advance.
Mayur.
|
|
|
|
|
Hi,
I need to send a stop command to my receiver over COM port before the device goes into Suspend mode.
How should I do this? I am able to catch the resume event but i need to stop the communication before resume. My app displays a message if the sending over COM port fails and this happens before the handheld resumes.
Please suggest.
Thanks
|
|
|
|
|
hi,
im new to windows mobile development on .net.
im using:
visual studio pro 2008;
windows 7
Windows mobile SDK 5.0
On the File menu, i select New->Project. In the Project Types pane on the left, expand Visual C# and select Smart Device. In the Templates pane on the right, select Smart Device Project and click OK. When the Add New Smart Device Project wizard pops up, i select Device Application and click OK.
so i start debugging and ran the emulator. i open windows media player wanting to play some songs. how do i use the media player to open songs from my computer or import the songs from my computer to the emulator?
|
|
|
|
|
Hi Nuttynibbles,
It is very easy to achieve it.
prerequisite for connecting emulator you must install "Windows Mobile Device center"
Step-1: open your Smart device project and connect to appropriate emulator.
Step-2: Go to menu bar & click on Tools-> Device Emulator Manager..
Step-3: Look in to "Device Emulator Manager.." here you will find a green color Arrow (it's your connected Emulator), Right Click on it and click on cradle, then "Windows Mobile Device center" will automatically open then you have to setup your "Windows Mobile Device center" with setting that time you have select all setting like contacts, appointment etc.
Step-4: Click on your PC My computer and you see the "Mobile Device" then double click on it the you are able to access emulator drivers the you can put your songs.
if you are not able to access it please let me know.
Hope this may be help.
Pavan Pareta
|
|
|
|
|
Hi,
Tks for the response. Erm those were the steps i tried on windows 7 but it didnt work.
I've decided to use window xp for the mobile development and now everything works =)
|
|
|
|
|
hi
how to get computer IP that connect to my Pocket-PC ?
i need to see this IP in my Pocket-PC.
i work on VS2008 C# Windows-mobile
thank's in advance
|
|
|
|
|
Are you using Active Sync to connect your PC to your mobile device?
|
|
|
|
|
Hi all,
I implement a complex application in WM6.5
I would like to implement a CSS-like layer in order to have a standardization for the GUIs of the corresponding components of the application.
Is it supported from .NET CE?
I need something like Stylesheet xml-like file (StylesSheetManager - A 'CSS like component' for WinForms[^] )
Thanks in advance,
|
|
|
|
|
Hi,
We need a custom build program for a Nokia 6310i basically this will need to send SMS's and calls out we have got a previous program similar to the one we need to for a Nokia 6210.
Anyone with experience in FBUS/AT commands should easily be able to complete this project.
If you need more info please send me an private email.
Thanks, Asif
|
|
|
|
|
If you are trying to recruit people then please use the Jobs forum.
|
|
|
|
|
hi all,
i want to restart the Window mobile after the successfully installation of my application.
For install the application, i create the cab file which install the application on device. this cab works well. but i also want to restart the system
so Please suggest how can i restart the device.
any sample source code or link is greatly appreciated
|
|
|
|
|
Hi Rupesh Kumar Swami,
are you aware how to use setup dll ?
Please see this Link[^]
Hope its help for you
Pavan Pareta
|
|
|
|
|
Using SetSystemPowerState() API a Windows CE device can be restarted.
|
|
|
|
|
Hi all,
Someone know how to retrive the system name of the Storage Card?
This is because often changig the WM version or the localization of the device, can also change the name of the Storage Card (with cosequence of the "Path not found" error in the program).
Thanks for help
|
|
|
|
|
The System.IO.DirectoryInfo object can be used to get a list of all directories. Storage Cards will have this attribute: System.IO.FileAttributes.Temporary.
|
|
|
|
|
Hi all
I am trying to develop a VOIP application on WinCE. And as
first step i am trying to record and play the recorded audio
simultaneously on the device.
To achieve this i am creating 2 threads one to capture audio
and store it in a MessageQueue and the other thread would
fetch the stored audio packet from the MessgaeQueue and play
it.
So far i have been able to record and play the audio but the
problem is the quality of the audio. There is lot of noice
while playing the audio. I dont know just by storing it in
the messgae queue how is this noise is getting introduced. I
have tried to write the output in a file and play it at some
later time and it works just fine.
I am using the same sampling rate for recording and playing.
Capturing PCM
Mono channel
8 Khz Samples per second
16 bits per sample
What could be the reason for noise, is the mechanism i am
using correct or there is some other better way.
Any help is really appreciated.
Thanks
Gurinder
|
|
|
|
|
Hi folks!
I do have an "Windows Mobile 5" device that runs a software that is trying to connect to a server in our network.
When starting the software and connecting via IP-address everything works within a second.
But we need to use the hostname of the server as the IP-address may change.
So i built in a "DNS.GetHostEntry"-call to get the IPEndPoint i need to connect.
When running the software the first time after reboot the DNS-Lookup takes between 20 and 30 seconds, which is way to long.
(btw. when entering a URL in the device´s Internet Explorer is way faster!)
Is there a way to speed up this query?
Thanx for help!
Greetings
J.Holzer
|
|
|
|
|
When I use "Add a new Data Source" to add my database to my application I
get the message "Could not retrieve schema information for table or view..."
after I click Finish to Choosing the Database Objects (tables).
In "Data Sources" I see the tables in the database but I cannot see the
fields.
If I right-click on a table and click "Preview Data", I can see all the data
in the table.
It's strange because I already did a function where I can see if table exists or not and it works perfectly, so I'm only having problems creating the dataset...
modified on Monday, November 30, 2009 3:06 PM
|
|
|
|
|
Hello!
I would like to know how can I call a telephone number when user clicks on the number? The other question is how can I pass the url link to OS's web browser so it opens it whenever user clicks the link.
Thanks.
What a curious mind needs to discover knowledge is noting else than a pin-hole.
|
|
|
|
|
hi
i looking for any way to transfer file from PPC to PC - and from PC to PPC ,
i dont want to use WebService, and if i use RAPI i need that in the PC will be any program - and i dont want
(i dont want that in the PC will be any of my program)
how i can do it (in C#) ?
thank's in advance
|
|
|
|