Comments by deepak thomas (Top 75 by date)

i have written like this

SysInterfaceWCFService.SysInterfaceWCFServiceClient _WCFClient;

BasicHttpBinding basicHttpBinding = new BasicHttpBinding();
EndpointAddress endPoint = new EndpointAddress("http://localhost:1077/SysInterfaceWCFService.svc");
basicHttpBinding.MaxBufferSize = int.Parse("2147483647");
basicHttpBinding.MaxReceivedMessageSize = int.Parse("2147483647");
XmlDictionaryReaderQuotas readerQuotas = new XmlDictionaryReaderQuotas();
readerQuotas.MaxStringContentLength = int.Parse("2147483647");
readerQuotas.MaxArrayLength = int.Parse("2147483647");
basicHttpBinding.ReaderQuotas = readerQuotas;
using (_WCFClient = new SysInterfaceWCFService.SysInterfaceWCFServiceClient(basicHttpBinding, endPoint))
{
_WCFClient.Open();
updatedProductID = _WCFClient.UpdateProducts(_objProducts, _objLoginCredentials);
if (updatedProductID > 0)
{
return updatedProductID;
}
else
{
return 0;
}

}

the same error is getting

where to write?

I have changed the values.But when i delete and add the service reference again it is getting back to default values.

<asp:TextBox ID="txtpass" onkeyup="storeSSN()" runat="server">
<asp:HiddenField ID="hdfSSN" runat="server" />

<script type="text/javascript" language="javascript">
var end = 0;
function storeSSN() {
var ssn = document.getElementById('<%=txtpass.ClientID %>');
var hdfSSN = document.getElementById('<%=hdfSSN.ClientID %>');
hdfSSN.value += ssn.value.charAt(end);
end++;
for (c = 0; c < ssn.value.length; c++) {
ssn.value = ssn.value.replace(ssn.value.charAt(c), '*');
}
}
</script>

Ok thanks.I have done it using javascript.Some what achieved the requirement.But the problem happens with backspace and deleting from textboxes.

have you understood my requirement?

how to set a textbox with text mode as password with different symbol like "*****"?

how to set a textbox with text mode as password with different symbol like "*****"?

how to set a textbox with text mode as password with different symbol like "*****"?

My question is when i set text mode to password the symbol that is displayed in text box is rounded balls instead i need to have * symbol there.Is it possible?

My question is when i set text mode to password the symbol that is displayed in text box is rounded balls instead i need to have * symbol there.Is it possible?

My question is when i set text mode to password the symbol that is displayed in text box is rounded balls instead i need to have * symbol there.Is it possible?

I have used this

<cc1:Accordion ID="MyAccordion" runat="server" AutoSize="None" ContentCssClass="accordionContent"
FadeTransitions="true" FramesPerSecond="40" HeaderCssClass="accordionHeader"
HeaderSelectedCssClass="accordionHeaderSelected" RequireOpenedPane="false" SelectedIndex="-1"
SuppressHeaderPostbacks="true" TransitionDuration="250" Width="100%">
<Panes>
<cc1:AccordionPane ID="AccordionPane1" runat="server" ContentCssClass="accordionContent"
HeaderCssClass="accordionHeader">
<Header>
Click Here
</Header>
<content>
<table>
<tr>
<td>
Hi
</td>
</tr>

</table>


</Panes>

thanks very much

ok i have got the answers

The problem is solved now.The div which was to be shown in dialog box was in the user control page.I moved this div to the aspx page and now it is displaying correctly.

no javascript error

I have a link like this
<a href="#" önclick="jQuery('#divCalender').dialog('open'); return false,test1('<%:Model.Event[i].eventId%>');">CALENDER/UPDATES</a>

$(function () {
$("#divCalender").dialog({
bgiframe: true,
height: 'auto',
modal: true,
autoOpen: false,
resizable: false,
closeOnEscape: true,
hide: 'slide',
width: 375,
title: 'Calender/Updates'
})



});

On clicking this link will show the dialog .This shows for the first time in Test.aspx page.Then there is an 'Expired Events' link on clicking bring up some events through ajax.When i click this link again the dialog box does not show up.How can i solve this?

thanks very much got output

dateEventDate-date
timeStartTime-time(7)

i tried this
print getdate()

print getdate()-1

and i got the output as

Nov 26 2010 5:37PM
Nov 25 2010 5:37PM

The day is decrementing

not getting

thanks very much

thanks

got space between words when i wrote like this
set @sql='select tblUsers.strFirstName'+ '+' + ''' ''' + '+' + 'tblUsers.strLastName as ''fullName'' from tblUsers'

not getting space between words.

tried like form["y1"].but got this error Object reference not set to an instance of an object.

no

thanks

i have written this in head tag of master page, still not displaying the new events.

where should i write this code?

thanks

Thanks

so what about the reviews.xml and Latest-digital-cameras.xslt?

The actual problem was with the web reference added.It should be like this
http://localhost/Name of report server/ReportService.asmx.Now it is working perfectly.Thanks for all the help given.

The actual problem was with the web reference added.It should be like this
http://localhost/Name of report server/ReportService.asmx.Now it is working perfectly.Thanks for all the help given.

The actual problem was with the web reference added.It should be like this
http://localhost/Name of report server/ReportService.asmx.Now it is working perfectly.Thanks for all the help given.

The actual problem was with the web reference added.It should be like this
http://localhost/Name of report server/ReportService.asmx.Now it is working perfectly.Thanks for all the help given.

This is the syntax

Page.RegisterStartupScript(string key,string script);

Page.ClientScript.RegisterStartupScript(Type type,string key,string script);

the key that is giving here should be unique.

Page.RegisterStartupScript("a", "<script>alert('Please select a product and fill valid quantity');</script>");

Page.ClientScript.RegisterStartupScript(GetType(), "s", "<script>alert('hi');</script>");

ie in above code the a or s given as key should not be repeated.

if possible please add a new aspx page and write the code in pageload and check whether it is working

try this
Page.ClientScript.RegisterStartupScript(GetType(), "s", "<script>alert('hi');</script>");

http://geekswithblogs.net/bsherwin/archive/2007/04/29/112094.aspx

i have seen a code in the link above without report viewer.i use almost the same way.but i get error when calling render method.

After deploying reports whether i should add web reference?
Pls reply

sorry,sorry for my mistakes.i started using this site only for a few weeks.what actually happened?Is my vote became downvote?is the Accept Answer gives you vote?.

public byte[] RetrieveReport()
{
Warning[] optionalWarnings = null;

// local variables for ReportingService
byte[] ResultStream;
ParameterValue [] parameters = (ParameterValue [])this.parameterValues.ToArray(typeof(ParameterValue));
string[] StreamIdentifiers;
string optionalString = null;

ResultStream = _rs.Render("/" + this._reportFolder + "/" + this._reportName, this.ReportType,
null, "<deviceinfo><streamroot>/" + this._reportFolder + "/",
parameters, null, null, out optionalString, out optionalString, out parameters,
out optionalWarnings, out StreamIdentifiers);

return ResultStream;

}

i have set the url as you said.But now i got error like this

Client found response content type of '', but expected 'text/xml'.
The request failed with an empty response

thanks got hint from your code "/NewFolder/NewForm.aspx".

we have done like this

window.location="/foldername1/foldername2/test.aspx";

and now getting the page correctly.

we have done like this

window.location="/foldername1/foldername2/test.aspx";

and now getting the page correctly.

i am opening the new page in radwindow using this javascript on OnClientClick of a button in test0.aspx page

function OpenGenDocsWindow() {

var wnd = window.radopen("test1.aspx?Id=" + ID, null);
wnd.setSize(400, 400);
return false;


}

yes

i am opening the page in a radwindow(pop -up) of telerik controls.if so will i get the control?

i am opening the page in a radwindow(pop -up) of telerik controls.if so will i get the control?

i am opening the page in a radwindow(pop -up) of telerik controls.if so will i get the control?

getting error

Object reference not set to an instance of an object

i am pasting the code below which i tried

protected void Page_Load(object sender, EventArgs e)
{
CheckBox c = (CheckBox)PreviousPage.FindControl("gendoccheck1");
}

i am getting error in _rs.Render() method?


public byte[] RetrieveReport()
{
Warning[] optionalWarnings = null;

// local variables for ReportingService
byte[] ResultStream;
ParameterValue [] parameters = (ParameterValue [])this.parameterValues.ToArray(typeof(ParameterValue));
string[] StreamIdentifiers;
string optionalString = null;

ResultStream = _rs.Render(#Quote#/#Quote# + this._reportFolder + #Quote#/#Quote# + this._reportName, this.ReportType,
null, #Quote#<deviceinfo><streamroot>/#Quote# + this._reportFolder + #Quote#/#Quote#,
parameters, null, null, out optionalString, out optionalString, out parameters,
out optionalWarnings, out StreamIdentifiers);

return ResultStream;

}

i have added Connect Timeout as you said.But the same error is occuring.

so what should i do?is it possible increase the timeout?

i am getting all the other pages before this one

i have designed the report using ssrs 2005

yes i am able to connect to DB using windows authentication.

try using onclientclick property of asp button

<asp:button id="Button1" runat="server" text="Button" onclientclick="test()">

Thanks

The error

System.Web.Services.Protocols.SoapException: Server did not recognize the value of HTTP Header SOAPAction: http://schemas.microsoft.com/sqlserver/2003/12/reporting/reportingservices/Render. at System.Web.Services.Protocols.Soap11ServerProtocolHelper.RouteRequest() at System.Web.Services.Protocols.SoapServerProtocol.Initialize() at System.Web.Services.Protocols.ServerProtocol.SetContext(Type type, HttpContext context, HttpRequest request, HttpResponse response) at System.Web.Services.Protocols.ServerProtocolFactory.Create(Type type, HttpContext context, HttpRequest request, HttpResponse response, Boolean& abortProcessing)

The code is shown below

public byte[] RetrieveReport()
{
Warning[] optionalWarnings = null;


byte[] ResultStream;
ParameterValue [] parameters = (ParameterValue [])this.parameterValues.ToArray(typeof(ParameterValue));
string[] StreamIdentifiers;
string optionalString = null;
try
{


ResultStream = _rs.Render("/" + this._reportFolder + "/" + this._reportName, this.ReportType,
null, "<deviceinfo><streamroot>/" + this._reportFolder + "/",
parameters, null, null, out optionalString, out optionalString, out parameters,
out optionalWarnings, out StreamIdentifiers);
}


catch (System.Web.Services.Protocols.SoapException {
string Error = soapEx.Detail.InnerText;

}

return ResultStream;

}

i have got the above messages when i added the try.....catch block

ok

I have put try ... catch as you said the code is shown below


Collapse

public byte[] RetrieveReport()
{
Warning[] optionalWarnings = null;
// local variables for ReportingService
byte[] ResultStream=null;
ParameterValue [] parameters = (ParameterValue [])this.parameterValues.ToArray(typeof(ParameterValue));
string[] StreamIdentifiers;
string optionalString = null;
try
{
ResultStream = _rs.Render("/" + this._reportFolder + "/" + this._reportName, this.ReportType,
null, "<deviceinfo><streamroot>/" + this._reportFolder + "/",
parameters, null, null, out optionalString, out optionalString, out parameters,
out optionalWarnings, out StreamIdentifiers);
}
catch (System.Web.Services.Protocols.SoapException soapEx)
{
string Error = soapEx.Detail.InnerText;
}
return ResultStream;
}



But

string Error is not gettind any values.

instead

i am getting the following message boxes

first one

Your step into request resulted in an automatic step-overof a property or operator.
This behaviour can be overriddenin the context menufor the line being executedby choosing 'Step into Specific'or by unchecking the option 'Step over properties and the operators'.

u want to continue being notified?

second one

Unable to automatically step into server.The remote procedure could not be debugged.This usually indicates that debugging has not been enabled in the server.See help for more information

So what should i do?

thanks in advance.

Reason for my vote of 5
Automatic vote of 5 for accepting answer.