|
As far as signing, the Device Manager driver install hassled me with Q&A about did I really want to do it this and then seemed to try to install. That is when I got the init error.
"DDISABLE_INTEGRITY_CHECKS" >>> I put in both DDISABLE_INTEGRITY_CHECKS and DISABLE_INTEGRITY_CHECKS to be sure. Both were accepted and it worked, system booted in test mode as you said.
I use Remote Desktop to run the target test machine and I have a 1 Gb Ethernet connection. I will have to read the docs to figure out how to run debugger. For regular apps I install the Visual Studio remote debugger on the target and hook Visual Studio to it over the LAN. Pretty sure this will not work for kernel mode debugging.
Sorry, I did not understand your debugging suggestion. Any good docs, links, etc. you would recommend?
And thank you very much for your support. It is appreciated. I figure I will baby step my way to a full Win7 x64 driver. Win7 x86 is a good stepping stone I think.
Thanks again.
|
|
|
|
|
GeorgeMayfield wrote: regular apps I install the Visual Studio remote debugger on the target and hook
Visual Studio to it over the LAN. Pretty sure this will not work for kernel mode
debugging
It wont.
You need to enable debug in the kernel, its the ini file on XP, or system configuration on win7. I like firewire, its quick, but not all machines have it, but you can get firewore pccards and pic cards. For info on this just google it, MSDN will be a good source, OSR online is another great kernel source, very good n fact.
Have fun! Its the bitchiest learning curve in the world, but when you master the windows kernel, everything else is childs play! 
"The whole idea that carbon dioxide is the main cause of the recent global warming is based on a guess that was proved false by empirical evidence during the 1990s." climate-models-go-cold
|
|
|
|
|
Thank you Mr. Munchies. I am a newbie at this and did not understand most of your debugging input. I have Ethernet and hope that will work for remote. Or I will install tools directly on my target and just work locally. I will see what DDK docs say.
I do appreciate the input. I will probably not have anything to say for awhile since now I must also do my taxes. I am a schedule C guy and that takes time.
Thanks.
|
|
|
|
|
GeorgeMayfield wrote: I have Ethernet and hope that will work
No, you cant use it. Has to be firewire or com port. You cant work locally either, because when you break the kernel, the whole machine locks.
It is easy once you first do it, load symbols, load your code, step through it, see it working, and its a very powerful debugger too, windbg, very powerful. Once you get used to it you will use it for user mode debugging too and only use VS as a code editor. Seriously.
"The whole idea that carbon dioxide is the main cause of the recent global warming is based on a guess that was proved false by empirical evidence during the 1990s." climate-models-go-cold
modified 10-Apr-14 19:15pm.
|
|
|
|
|
OK, that sucks. My dev system is a laptop but I think it has firewire (sort of a trapezoid connector and USBish sized ???) and NO com or printer ports. My target is an industrial single board but with a PCI (not PCIx) bus and COM ports. Maybe I can use a USB to serial card for the laptop and hook that way.
As we speak I am downloading the checked version of Win7 x86 and Win7 x64. More as I read the docs.
Thanks.
|
|
|
|
|
COM ports are rare these days, firewire less so but you can use a serial to USB (star, prolific) to put aa COMN port on a laptop. Firewire is quicker though, be aware of that.
A firewire PCI card will be about the same as a usb-Serial converter (20 euros/25 dollars).
Checked versions of the OS are useful when you really have to debug into the OS, but otherwise not, and I have never used them (I once downloaded just a checked ndis.sys though.) You can turn on debugging in various components of the kernel.
Be ware of one thing, on 7 you need to enable debug printing, so google adding 'Debug Print Filter' to the registry.
And when debugging your driver enable Verifier on it, selecting all but the ;low resource simulation' setting. You will get a lot of bugs probably, but these are all real bugs that need fixing, its just that verifier finds them before your customers do. SOS use it. Religiously,
And when you have done all that, you want to sign the driver. And that, is another whole can of worms, believe me.
"The whole idea that carbon dioxide is the main cause of the recent global warming is based on a guess that was proved false by empirical evidence during the 1990s." climate-models-go-cold
|
|
|
|
|
Thanks for tips. Take awhile to set this up. More when I know it.
|
|
|
|
|
What would interfere or cause an interupt? Windows xp pro, usb to serial with prolific 1.8 drivers (I think... sorry tried three diff versions thus far), legacy hardware enabled, power disabled on usb root, serial mouse detection turned off (uses usb mouse anyway and PS2 connected keyboard). 232 data converter to usb to serial and the application is based on .Net 2.0 / Visual Fox Pro (not my app). Besides the monitor, no other connected devices for i/o. Has all updates.
Everything seems to test fine. (Telnet to 232 works as well) I am at my end of knowledge or just missing the obvious.
Suggestions? It works about an hour'ish and then just stops.
|
|
|
|
|
|
I did not catch anything of significance. I did find that I would get a contious receive. I think the dc is bad.
However, with all of this I did switch machines (so to speak ... hit the junk pile and built one from pieces and parts) and had the same problem. After some time, I had a light-bulb go off inside my head. Update the chip set drivers. It worked.
Stupid me. I should have considered drivers on the previous machine. It just never even crossed my mind that they could have updated or needed to update with a Win Update. Ouch ... such a newbie mistake.
|
|
|
|
|
Hi to all,
Is there an official way to propose a new chapter and forum section? Or is it enough to say that I want a new chapter for Arduino articles? Or may I want it in this forum 
|
|
|
|
|
|
|
Such as a USB keyboard to press a key, an interrupt is generated.
thanks muuuuuch
|
|
|
|
|
I'm not sure about how to simulate one, but I remember using the standard PC keyboard interrupt to trigger events in a C++ (state machine) program assignment I wrote. My lecturer just loaded it onto his PC with all his work on it to try it out and it worked and importantly then returned normal function to the keyboard interrupt I'd used - Interrupt 9. I used a book 'The undocumented PC for information which is/was very good for this sort of stuff.
As you mention a USB device, try looking at devices that provide Inputs and Outputs - they often have one or more inputs that can be set to trigger an interrupt when their input state is changed - by say a switch. I've used mostly internal PC I/O cards which can trigger interrupts but also USB devices which provide the same functionality. Serial Port connected devices also have/had this functionality - even if your PC may no longer have a 9 pin serial port.
|
|
|
|
|
Hi everyone
I'm developing an application in vxworks. In this application I use uart in polling mode for reading and writing.
The problem is that when I disable uart interrupt using "intDisable" command, uart generally does not work in polling mode.
The question is whether this is normal? Why uart does not work in polling mode if I disable it's interrupts.
Thanks for the tips of your
|
|
|
|
|
Hi A_Fa Can I know which CPU you are using?
|
|
|
|
|
Excuse me for very long delay in response.
Our target board is ML507 with PPC440 processor.
Thanks very much.
|
|
|
|
|
Up front, I apologize if this is not exactly code related , but I am stuck.
I am trying to resurrect my Win7 from image.
From Win7 setup disk I select “restore from last image / backup”.
The restore app identifies the internal SATA drive and lets me select it for restoration.
So it knows the drive exists. The resoration process suppose to format the drive, it does not.
and the restoration fails and the only option is to “download HD driver”.
My XP PC does not use SATA so I cannot let helpful folks scan my PC for this particular drive.
I have been unable to find JUST the driver, but I keep looking.
The catch is – Win 7 opens \System32 when I try to find the suitable driver.
So my basic questions -
if the restore apps knows the type of the drive , where in the \System32 is the driver located?
If it is there why can the restore app find it for me?
Is there any other way to restore the image to the internal drive ON DEAD PC?
And reasonable suggestions would be appreciated.
Cheers Vaclav
PS I have not found answers Googling.
|
|
|
|
|
Your post is a bit of a cluster... between talking about XP and Win7, SATA and not having SATA, I have no clue what system you have and are trying to rescue.
|
|
|
|
|
Try installing windows 7 first and then restore the image with a running windows not from the setup disk.
|
|
|
|
|
I'm trying to head off an IT inflicted disaster. IT wants to move the s/w team I am on to a new machine. They desperately need to do this, and I'm not arguing. However, the LAST time they moved a lot of our files (backup development zip files for example), the transfer (xcopy) corrupted them. It wasn't until a year later when I needed the old code the problem was discovered.
So, alternatives to xcopy? I'm sure there must be something better out there that will do a binary check for a good copy...
Anything else I should fear?
Thanks
Charlie Gilley
<italic>You're going to tell me what I want to know, or I'm going to beat you to death in your own house.
"Where liberty dwells, there is my country." B. Franklin, 1783
“They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.” BF, 1759
|
|
|
|
|
Tell them to use Backup & Restore. After all, you are the President, according to your biography.
Veni, vidi, abiit domum
|
|
|
|
|
Yeah, *that* will work. I own my own consulting firm, but I am on contract. So....
But, I can certainly insist politely. I see the backup/restore has verification, so that's better.
That reminds me, I need to image my hard drive....
Charlie Gilley
<italic>You're going to tell me what I want to know, or I'm going to beat you to death in your own house.
"Where liberty dwells, there is my country." B. Franklin, 1783
“They who can give up essential liberty to obtain a little temporary safety deserve neither liberty nor safety.” BF, 1759
|
|
|
|
|
There is a new copy program in Windows called Robocopy[^]. It might work better for you.
The difficult we do right away...
...the impossible takes slightly longer.
|
|
|
|
General 
News 
Suggestion 
Question 
Bug 
Answer 
Joke 
Praise 
Rant 
Admin 
Submit an article or tip
